parting a 69 GMC 1/2 ton - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hittman · 07-18-2007, 01:11 PM

As far as the cab forward side trim, how much do you want for it and do you think it is in decent shape for a nice driver?

Thanks again.

teeitup · 07-18-2007, 08:34 PM

Samwise, I took 2 pics, it comes pretty close to headers, probably within 7/16 of an inch
Thealien, I couldn't tell if it was good or not. I got 5 trucks around here, surely one is good. Probably sell one for $7 plus shipping. I can pull one Sat afternoon if you want one
Dart_451, Loren, I was mistaken, I do have one on this truck. $20 for it
Hittman, I would say driver quality not good driver. Some dings and black paint is off some of the pieces. $25 plus shipping for the 14 pieces
Thanks Randy

Husker · 07-18-2007, 10:44 PM

No Problem. Thanks
Ron

samwise68 · 07-19-2007, 09:10 PM

Randy,

I ran it by my dad, since he ran a very similar set up with a 283, and a 3 spd, and he says it'll work out fine.

so.

price (if it's not too much...college student here. hah.)
and shipping to 54501?

thanks much for everything!

-Sam.

teeitup · 07-19-2007, 10:02 PM

Ron, it looks like it will be Sat before I have time to get it off
Sam, I pm'd you asking just what all parts your needing.
Thanks Randy

Thealien · 07-19-2007, 11:18 PM

Sure, I'll even take a complete passenger side non A/C vent setup and one complete A/C setup including all mounting screws if you have either/both (most needed is non A/C manual handle) shipped to 02302. Let me know what you got and a total.

Mark

teeitup · 07-20-2007, 11:51 PM

Mark, none of the trucks I have has AC in them all non AC. Just making sure what your wanting? The under dash heater stuff? Not sure what you need for sure? Thanks Randy

longhorn70gmc · 07-21-2007, 02:01 AM

Hi Randy,
Do you have any extra six lug brake drums for the front. I thought I would check and see.

teeitup · 07-21-2007, 11:09 AM

Billy, I'll have the front hubs off this one. I got 2 other 69's sitting out at the barn that have them too. Not sure condition of any of them though. I'll work with you on price, I've never sold them before or even take any off to be sold. Thanks Randy

teeitup · 07-21-2007, 03:16 PM

Husker, Pics of grill, shows damage, it was behind bumper and I couldn't see it. I'll PM you. There is another grill too, top bar has rust and some damage on bottom, see pic
Samwise, I'll pm you total of headers

teeitup · 07-21-2007, 03:24 PM

Southernpartsm Woody here is what I got in gauges in these pics and pics before, $25 each except last pics that one is $20. So 3 more good ones and the last one. Thanks Randy

1970bowtie · 07-21-2007, 03:45 PM

tail lights,and reverse light assemblies,with all screws,and wiring,dont have to have lens.shiped to 75754

Thealien · 07-22-2007, 01:31 PM

Quote:

Originally Posted by teeitup

Mark, none of the trucks I have has AC in them all non AC. Just making sure what your wanting? The under dash heater stuff? Not sure what you need for sure? Thanks Randy

Is there a vent in the passenger side kick panel operated by pushin/pulling a knob? If there is I will take all those parts including the screws that mount that knob assembly.

Mark

longhorn70gmc · 07-25-2007, 12:35 AM

Hi Randy,
I have one Drum on the front of my 1/2 ton to remove or should I say force off. If it is in bad condition I will get back with you for one. I priced em brand new for $25 at Auto Zone, but Longhorn man AKA (Andy), says they warp easy being new. I plan on getting to it this weekend. My Front bearing is shot too. Hopefully it will survive the puller. Thanks as always Randy!!!!!

teeitup · 07-25-2007, 06:32 PM

Thealien, I looked at them all, and all are rusted or bad, sorry
Billy, sure let me know,
Thanks Randy

07-18-2007, 01:11 PM	#26
Hittman Registered User Join Date: Feb 2007 Location: Maryville, MO Posts: 49	Re: parting a 69 GMC 1/2 ton As far as the cab forward side trim, how much do you want for it and do you think it is in decent shape for a nice driver? Thanks again. __________________ 1970 C20 350 4-Speed no options but only 56K original miles.....Now a K20 mutt with a SB400! 2002 Impala LS (wife's car)

07-18-2007, 08:34 PM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 GMC 1/2 ton Samwise, I took 2 pics, it comes pretty close to headers, probably within 7/16 of an inch Thealien, I couldn't tell if it was good or not. I got 5 trucks around here, surely one is good. Probably sell one for $7 plus shipping. I can pull one Sat afternoon if you want one Dart_451, Loren, I was mistaken, I do have one on this truck. $20 for it Hittman, I would say driver quality not good driver. Some dings and black paint is off some of the pieces. $25 plus shipping for the 14 pieces Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-18-2007, 10:44 PM	#28
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: parting a 69 GMC 1/2 ton No Problem. Thanks Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

07-19-2007, 10:02 PM	#30
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 GMC 1/2 ton Ron, it looks like it will be Sat before I have time to get it off Sam, I pm'd you asking just what all parts your needing. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-19-2007, 11:18 PM	#31
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,125	Re: parting a 69 GMC 1/2 ton Sure, I'll even take a complete passenger side non A/C vent setup and one complete A/C setup including all mounting screws if you have either/both (most needed is non A/C manual handle) shipped to 02302. Let me know what you got and a total. Mark

07-20-2007, 11:51 PM	#32
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 GMC 1/2 ton Mark, none of the trucks I have has AC in them all non AC. Just making sure what your wanting? The under dash heater stuff? Not sure what you need for sure? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-21-2007, 02:01 AM	#33
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: parting a 69 GMC 1/2 ton Hi Randy, Do you have any extra six lug brake drums for the front. I thought I would check and see. __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

07-21-2007, 11:09 AM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 GMC 1/2 ton Billy, I'll have the front hubs off this one. I got 2 other 69's sitting out at the barn that have them too. Not sure condition of any of them though. I'll work with you on price, I've never sold them before or even take any off to be sold. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-21-2007, 03:16 PM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 GMC 1/2 ton Husker, Pics of grill, shows damage, it was behind bumper and I couldn't see it. I'll PM you. There is another grill too, top bar has rust and some damage on bottom, see pic Samwise, I'll pm you total of headers Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-21-2007, 03:24 PM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 GMC 1/2 ton Southernpartsm Woody here is what I got in gauges in these pics and pics before, $25 each except last pics that one is $20. So 3 more good ones and the last one. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 07-21-2007 at 03:25 PM.

07-21-2007, 03:45 PM	#37
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: parting a 69 GMC 1/2 ton tail lights,and reverse light assemblies,with all screws,and wiring,dont have to have lens.shiped to 75754 __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

07-25-2007, 12:35 AM	#39
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: parting a 69 GMC 1/2 ton Hi Randy, I have one Drum on the front of my 1/2 ton to remove or should I say force off. If it is in bad condition I will get back with you for one. I priced em brand new for $25 at Auto Zone, but Longhorn man AKA (Andy), says they warp easy being new. I plan on getting to it this weekend. My Front bearing is shot too. Hopefully it will survive the puller. Thanks as always Randy!!!!! __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

07-25-2007, 06:32 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 GMC 1/2 ton Thealien, I looked at them all, and all are rusted or bad, sorry Billy, sure let me know, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.