|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-15-2007, 07:59 AM
|
#1 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
parting a 69 GMC 1/2 ton
Just hauled it in, ask if you see anything you need and I'll price it. Thanks Randy
350 with a 3 speed in it bed is in OK shape no rust on side just some dents, 2 small rust spots on the rear bed floor is all $250 for it main part of grill is dent free, needs a good waxing, top bar has some pitting $125 plus shipping NON tinted wing windows are pretty good some light pitting on chrome, rubbers are OK, felt bad in runners $50 plus shipping Brown dash pad is good $30 plus shipping bumper is'nt bad $35 plus shipping
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 07-15-2007 at 08:00 AM. |
|
|
|
07-15-2007, 08:20 AM
|
#2 |
|
Registered User
Join Date: Jan 2001
Location: Lincoln, Nebraska
Posts: 2,145
|
Re: parting a 69 GMC 1/2 ton
Randy
Is the bumper as straight as it looks? Dash pad nice shape? Thanks, Mark
__________________
'66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" |
|
|
|
|
07-15-2007, 08:45 AM
|
#3 |
|
Junior Member
Join Date: May 2007
Location: Milton, FL
Posts: 64
|
Re: parting a 69 GMC 1/2 ton
How's the core support?
Keith |
|
|
|
|
07-15-2007, 10:09 AM
|
#4 |
|
Registered User
Join Date: Apr 2007
Location: Medina, OH
Posts: 14
|
Re: parting a 69 GMC 1/2 ton
How are the inner fenders? From the picture they look pretty good.
|
|
|
|
|
07-15-2007, 11:25 AM
|
#5 |
|
Registered User
Join Date: Jan 2007
Location: troutdale oregon
Posts: 169
|
Re: parting a 69 GMC 1/2 ton
passenger fender? rust? let me know...jeremy
|
|
|
|
|
07-15-2007, 11:34 AM
|
#6 |
|
Registered User
Join Date: Dec 1999
Location: Mid NE USA
Posts: 2,212
|
Re: parting a 69 GMC 1/2 ton
I am interested in the grill and the upper piece. Looks like a dent above the tubing in the one pic. Shipping to Nebraska 69101?
Thanks Ron
__________________
Member #111 68 C-10  Daily Driver70  4x4 Project76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson |
|
|
|
|
07-15-2007, 11:58 AM
|
#7 |
|
Registered User
Join Date: Mar 2004
Location: Lexington, KY
Posts: 865
|
Re: parting a 69 GMC 1/2 ton
Do the grill eyebrows have mounting clips in them? What would you want for the mounting clips?
__________________
"Green Monster" (Red Sox fan) 1970 GMC survivor, 350/200 4R, 3.42 rear gears, 2.5/4 drop, ECE disc brake conversion, powder coated suspension |
|
|
|
|
07-15-2007, 06:46 PM
|
#8 | |
|
FarmBoy.
Join Date: Feb 2005
Location: Rhinelander, WI
Posts: 1,103
|
Re: parting a 69 GMC 1/2 ton
you said it has a 350 with a 3 speed?
does it seem like the headers are ok, and fit with the clutch and shift linkage of the column shift? thanks! -Sam.
__________________
1969 GMC C1500. long fleet. 307. 3 on the tree. 3.07 gears. Oliver green. Bent and bruised. Daily Driver. Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=242993 |
|
|
|
|
|
07-15-2007, 09:01 PM
|
#9 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: parting a 69 GMC 1/2 ton
Hotfun, Mark, the bumper has a dent in middle where tag goes and one to the right between middle and bolts. The dash pad is nice no cracks just needs cleaned up
one9six9, Keith, its pretty good but I've never shipped a core support walker1972, sorry have some rust in them groundhog, Jeremy, has some rust in front lower cup Husker, Ron, top bar has a couple dings in the middle between center of grill and headlights. I'll try to get some pics and post them, it will be Mon late evening though maybe Tues. I have a golf tourney on Monday Incoma, yes it has the clips $15 shipped for all 4 Samwise68, Sam, I'll have to look and see how much clearance there is Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
|
|
|
|
07-16-2007, 08:05 AM
|
#10 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: parting a 69 GMC 1/2 ton
dash pad is sold to hotfun, thanks Mark, Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
|
|
|
|
07-16-2007, 09:29 AM
|
#11 |
|
Tightwad
Join Date: Jun 2005
Location: Louisiana
Posts: 408
|
Re: parting a 69 GMC 1/2 ton
How is the vent windows, are they pitted? Could you get me some pics of them?
Eric
__________________
56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons |
|
|
|
|
07-16-2007, 12:17 PM
|
#12 |
|
Registered User
Join Date: Feb 2007
Location: Maryville, MO
Posts: 49
|
Re: parting a 69 GMC 1/2 ton
That looks like a pretty solid and straight truck. How much for all the side and rear trim? Does most of it look fairly straight and dent free? Do you have a pic of the rear?
Thanks! Chris
__________________
1970 C20 350 4-Speed no options but only 56K original miles.....Now a K20 mutt with a SB400! 2002 Impala LS (wife's car) |
|
|
|
|
07-16-2007, 04:37 PM
|
#13 |
|
one set closer
Join Date: Jul 2003
Location: Memphis TN.
Posts: 722
|
Re: parting a 69 GMC 1/2 ton
what shape is the fan shourd any cracks or anything broken
if none above how much for it and the raditor hold down bracket.. UP GRADE Last edited by UP GRADE; 07-16-2007 at 04:39 PM. |
|
|
|
|
07-17-2007, 08:21 AM
|
#14 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: parting a 69 GMC 1/2 ton
I'll look at all these things today after work and get pics for everyone, I was gone all day Monday. Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
|
|
|
|
07-17-2007, 06:15 PM
|
#15 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: parting a 69 GMC 1/2 ton
Husker, here are pics of grill, the worst part of it is the top bar, one small hole see first picm couple small dings, there is some surface rust around edges see pics. I think it would all clean up, but would need a better top bar
Samwise, it has a floor shifter in it Chevy_man, Eric, they are not bad but they do have some light pitting on them. Hittman, Chris, I'll sell the cab forward trim but I don't want to take the trim off the bed. I'm trying to sell the bed with trim on it Upgrade, I've got 2 shouds, one is not cracked but it has the top edge wcraped some, see pic. Its hardly noticable $25 for one in pic. I got another not pictured, it has a crack in mounting tab but you wouldn't notice once bolted on. $20 for it. $5 for a set of 3 core rad holddowns. All plus shipping Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
|
|
|
|
07-17-2007, 06:18 PM
|
#16 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: parting a 69 GMC 1/2 ton
more pics
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
|
|
|
|
07-17-2007, 07:07 PM
|
#17 |
|
Tightwad
Join Date: Jun 2005
Location: Louisiana
Posts: 408
|
Re: parting a 69 GMC 1/2 ton
I am interrested in the vent windows depending on a price and shiping....
Eric
__________________
56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons |
|
|
|
|
07-17-2007, 07:24 PM
|
#18 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: parting a 69 GMC 1/2 ton
Eric, $40 plus shipping, I'd need your zip to figure it if you want them. They are not perfect but better than average. The rubbers are OK, one crack in one rubber. The felt part where window rolls up needs replaced. Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 07-17-2007 at 07:47 PM. |
|
|
|
|
07-17-2007, 08:47 PM
|
#19 |
|
Senior Member
Join Date: Jun 2007
Location: Pine Ridge Florida
Posts: 4,125
|
Re: parting a 69 GMC 1/2 ton
Do you have any of the passenger side kick panel vent door and handle? I am interested in it all mounting screws and all. Does it have it?
|
|
|
|
|
07-17-2007, 08:51 PM
|
#20 | |
|
FarmBoy.
Join Date: Feb 2005
Location: Rhinelander, WI
Posts: 1,103
|
Re: parting a 69 GMC 1/2 ton
Randy,
i saw it has a floor shifter, i don't think that makes a difference, since the clutch linkage is the same. atleast thats what i've been told. so, i'm still interested and all that jazz. thanks! -Sam.
__________________
1969 GMC C1500. long fleet. 307. 3 on the tree. 3.07 gears. Oliver green. Bent and bruised. Daily Driver. Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=242993 |
|
|
|
|
|
07-17-2007, 10:22 PM
|
#21 |
|
one set closer
Join Date: Jul 2003
Location: Memphis TN.
Posts: 722
|
Re: parting a 69 GMC 1/2 ton
how much to shipped to 38118 UP GRADE
|
|
|
|
|
07-17-2007, 11:26 PM
|
#22 |
|
Registered User
Join Date: Dec 1999
Location: Mid NE USA
Posts: 2,212
|
Re: parting a 69 GMC 1/2 ton
Randy Figure shipping on the Grille to Nebraska 69101.
thanks Ron
__________________
Member #111 68 C-10 Daily Driver70 4x4 Project76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson |
|
|
|
|
07-17-2007, 11:30 PM
|
#23 |
|
Registered User
Join Date: May 2007
Location: topeka,ks
Posts: 77
|
Re: parting a 69 GMC 1/2 ton
hi randy.do you have a manual steering box for my 69?and rear bumper(chrome) and the brackets? thanks loren.
|
|
|
|
|
07-18-2007, 06:33 AM
|
#24 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: parting a 69 GMC 1/2 ton
Thealien, I'll look at it after work and check condition
Sam, I'll get you a pic Up Grade, I'll get a quote after work Husker, Ron, I'll get it off and get a quote, it will be Frida or Sat befoe I get time to take it off dart_451, Loren, sorry no manual boxes on any of these I got right now. No sport bumpers or brackets right now either Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
|
|
|
|
07-18-2007, 09:28 AM
|
#25 |
|
Senior Member
Join Date: Jun 2007
Location: Pine Ridge Florida
Posts: 4,125
|
Re: parting a 69 GMC 1/2 ton
Thanks
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
