Anyone have pics of TPI motors in our trucks? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gray Ghost · 08-07-2008, 09:04 PM

Sweet...I am going to get a 700 for mine soon as well. 18 mpg sounds GOOD!!

Andy4639 · 08-08-2008, 08:16 AM

The part I hated the most was the fuel tank. I have been through 3 tanks before I got the one I have now and it works great. 93 Suburban 40 gal. tank. You have to have a return line ran back to the tank. I didn't want the factory tank with a electric fuel pump sitting behind me either so I relocated it to the bed.

c10addict · 08-08-2008, 08:27 AM

Quote:

Originally Posted by Andy4639

The part I hated the most was the fuel tank. I have been through 3 tanks before I got the one I have now and it works great. 93 Suburban 40 gal. tank. You have to have a return line ran back to the tank. I didn't want the factory tank with a electric fuel pump sitting behind me either so I relocated it to the bed.

I am running the stock tank, I ran a return line in to the tank next to the feed line and put a paxton pump under the cab.. You can not hear the pump at all when the engine is running... Here is an updated pic of the motor..

Andy4639 · 08-08-2008, 09:54 AM

I didn't have all the company's that are around today to choose from. I had to work with what I had.
Street & Performance was the only company doing these swaps at the time. That's why I have the V-6 computer running a V-8 now it was the cheap-o way to get what I wanted!

Gray Ghost · 08-08-2008, 06:52 PM

I am going to use the Blazer tank for mine...not sure what Cliff said about the pump but it won't bother me if it is inside the tank.

What air cleaner did you use C10addict? I am trying to decide between CAB or this type cleaner.

Andy4639 · 08-08-2008, 06:55 PM

I have the tank pump in all of mine that I have used. I just didn't want the factory tank sitting behind me with electric fuel pump in it. Nothing but a seat back between me and a big BOOM if anything ever happened!

c10addict · 08-08-2008, 08:28 PM

my air cleaner is from street and performance

Andy4639 · 08-08-2008, 08:48 PM

I have one of Street & Performance filter housings and it's brushed aluminum. I can get pictures if someone is interested in it. I will need to clean it up before I take pictures though.

jholley · 08-08-2008, 11:48 PM

Don't mean to hijack your thread but hey Duece can you tell me about that heater setup you have in the blue truck? Primarily whats under the dash? Thanks

08-07-2008, 09:04 PM	#26
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: Anyone have pics of TPI motors in our trucks? Sweet...I am going to get a 700 for mine soon as well. 18 mpg sounds GOOD!! __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

08-08-2008, 08:16 AM	#27
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Anyone have pics of TPI motors in our trucks? The part I hated the most was the fuel tank. I have been through 3 tanks before I got the one I have now and it works great. 93 Suburban 40 gal. tank. You have to have a return line ran back to the tank. I didn't want the factory tank with a electric fuel pump sitting behind me either so I relocated it to the bed. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-08-2008, 09:54 AM	#29
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Anyone have pics of TPI motors in our trucks? I didn't have all the company's that are around today to choose from. I had to work with what I had. Street & Performance was the only company doing these swaps at the time. That's why I have the V-6 computer running a V-8 now it was the cheap-o way to get what I wanted! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-08-2008, 06:52 PM	#30
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: Anyone have pics of TPI motors in our trucks? I am going to use the Blazer tank for mine...not sure what Cliff said about the pump but it won't bother me if it is inside the tank. What air cleaner did you use C10addict? I am trying to decide between CAB or this type cleaner. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

08-08-2008, 06:55 PM	#31
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Anyone have pics of TPI motors in our trucks? I have the tank pump in all of mine that I have used. I just didn't want the factory tank sitting behind me with electric fuel pump in it. Nothing but a seat back between me and a big BOOM if anything ever happened! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-08-2008, 08:28 PM	#32
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Anyone have pics of TPI motors in our trucks? my air cleaner is from street and performance __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

08-08-2008, 08:48 PM	#33
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Anyone have pics of TPI motors in our trucks? I have one of Street & Performance filter housings and it's brushed aluminum. I can get pictures if someone is interested in it. I will need to clean it up before I take pictures though. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-08-2008, 11:48 PM	#34
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	Re: Anyone have pics of TPI motors in our trucks? Don't mean to hijack your thread but hey Duece can you tell me about that heater setup you have in the blue truck? Primarily whats under the dash? Thanks __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.