AR WTB- Coy Wheel center cap spacers - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 05-17-2010, 02:47 PM

Update:
I have cut one set and sent to Keith (lolife99) today. When he gets them he can test fit and let me know if there needs to be any changes made.

As far as cost, what's fair? I don't really want to make any money. I just like helping folks out on here. I will be running on my time. So if I can get the material I will run them for the price of shipping plus say $10 a pair? It takes about 30 minutes to make a set of four.
Mike

**lolife99** · 05-17-2010, 04:30 PM

Quote:

Originally Posted by mcbassin

Update:
I have cut one set and sent to Keith (lolife99) today. When he gets them he can test fit and let me know if there needs to be any changes made.

As far as cost, what's fair? I don't really want to make any money. I just like helping folks out on here. I will be running on my time. So if I can get the material I will run them for the price of shipping plus say $10 a set? It takes about 30 minutes to make a set.
Mike

$10 a set is Cheap.
The material I sent you is limited,... so don't count on that when you figure your costs.
If you have to buy material the price will go up alot.

I will check the fit on a buddy's set of wheels.
I'll let you know asap so you can continue making them if you want.
I'll need two sets.

mcbassin · 05-17-2010, 04:52 PM

Quote:

Originally Posted by lolife99

$10 a set is Cheap.
The material I sent you is limited,... so don't count on that when you figure your costs.
If you have to buy material the price will go up alot.

I will check the fit on a buddy's set of wheels.
I'll let you know asap so you can continue making them if you want.
I'll need two sets.

I got you covered if you need another set.
Mike

skeeterbug · 05-17-2010, 07:19 PM

dont forget my set if all works out, just let me know if all works out

Tim R · 05-17-2010, 07:51 PM

If they work I need a set too please

Thanks Tim

svgould · 05-17-2010, 10:02 PM

I would also be interested in a set if you have any left. Thanks

**lolife99** · 05-17-2010, 10:13 PM

So my running total are the following members looking for these, is:

Edit: (as of 5-18-10)
1)Jackyl9999
2)Lolife99 (2 sets)
3)Tim R
4)Zoomin
5)Skeeterbug
6)big al 71
7)svgould

mcbassin · 05-18-2010, 12:53 AM

Quote:

Originally Posted by lolife99

So my running total of members looking for these is:

1)Jackyl9999
2)Lolife99 (2 sets)
3)Tim R
4)Zoomin
5)Skeeterbug
6)big al 71
7)Hart Rod (maybe)
8)svgould

I should have everyone on this list covered with the parts I ran today. As soon as I here back when you receive them and tell me they fit and meet the quality you would expect. At that time I will take orders. I think we can mail them in priority envelopes. I will be back to work on Wednesday and I will take some pictures.

big_al_71 · 05-18-2010, 07:37 AM

Quote:

Originally Posted by lolife99

So my running total of members looking for these is:

1)Jackyl9999
2)Lolife99 (2 sets)
3)Tim R
4)Zoomin
5)Skeeterbug
6)big al 71
7)Hart Rod (maybe)
8)svgould

Quote:

Originally Posted by mcbassin

I should have everyone on this list covered with the parts I ran today. As soon as I here back when you receive them and tell me they fit and meet the quality you would expect. At that time I will take orders. I think we can mail them in priority envelopes. I will be back to work on Wednesday and I will take some pictures.

Thank's guys for taking the time and effort to help us out!!!!!

**Hart_Rod** · 05-18-2010, 11:11 AM

Quote:

Originally Posted by lolife99

So my running total of members looking for these is:

1)Jackyl9999
2)Lolife99 (2 sets)
3)Tim R
4)Zoomin
5)Skeeterbug
6)big al 71
7)Hart Rod (maybe)
8)svgould

Keith, thanks, but I don't need a set. I was just going to get some quotes from a local place that has a waterjet. It looks like you guys have it figured out and for a great price. Take care.

R/

EDIT: If you end up with an extra spacer, let me know as I can still get a quote in case more people want some.

**lolife99** · 05-18-2010, 11:19 AM

Quote:

Originally Posted by Hart_Rod

Keith, thanks, but I don't need a set. I was just going to get some quotes from a local place that has a waterjet. It looks like you guys have it figured out and for a great price. Take care.

R/

EDIT: If you end up with an extra spacer, let me know as I can still get a quote in case more people want some.

Thanks for the reply.
I will update the list.

I'll also let you know if we have any extras.

**lolife99** · 05-18-2010, 11:22 AM

New list:
(as of 5-18-10)

1)Jackyl9999
2)Lolife99 (2 sets)
3)Tim R
4)Zoomin
5)Skeeterbug
6)big al 71
7)svgould

jackyl9999 · 05-19-2010, 09:21 AM

Its stuff like this that makes this board great. Let me know how much I owe you. I am ready to get my center caps on.

A big thanks to you for the effort.

mcbassin · 05-19-2010, 01:54 PM

Alright,
Here are the pictures I promised. Keith should get the parts I sent him today.
As soon as he says they work then I will start taking orders.

jackyl9999 · 05-19-2010, 11:58 PM

Looks good to me.

Number98 · 05-20-2010, 03:40 PM

Can you put me down for a set and let me know when you are ready to send them out...

**lolife99** · 05-19-2010, 03:04 PM

I did recieve them today.

I need to check these on a friends set of Coys wheels.
So if everyone will give me a day or two,... I'll find out, for sure, on the fit.

They look great.

mcbassin · 05-19-2010, 09:44 PM

Quote:

Originally Posted by lolife99

I did recieve them today.

I need to check these on a friends set of Coys wheels.
So if everyone will give me a day or two,... I'll find out, for sure, on the fit.

They look great.

Okay,
Glad to hear you got the spacers. I have about 20 more them ready. I would really like to know they fit properly before actually shipping them. Let me know how they fit. thanks

Tim R · 05-19-2010, 10:28 PM

Thanks For taking the time to make the spacers . This has been the most helpful site. My truck wouldnt be anything close to what it is now without the knowledge and help from the people here

Cant wait to fix the center caps on my wheels

Tim

svgould · 05-19-2010, 09:19 PM

I too think they look great....let me know how and when to pay.

Thanks,

Shane

**lolife99** · 05-20-2010, 04:44 PM

Added to the new list.
(5-20-10)

1)Jackyl9999
2)Lolife99 (2 sets) -Order Shipped
3)Tim R
4)Zoomin
5)Skeeterbug
6)big al 71
7)svgould
8)Number98

bigarmzz · 05-21-2010, 08:48 AM

why exactly do you need these center cap spacers on the coys?

is it b/c it opens up options for different center caps to bolt on to them? b/c i aint too fond of the current coys center caps, and that damn "coys" sticker on there

put me on the list at the price mentioned, dont seem like a bad thing at all, thanks

**lolife99** · 05-21-2010, 09:03 AM

Quote:

Originally Posted by bigarmzz

why exactly do you need these center cap spacers on the coys?
is it b/c it opens up options for different center caps to bolt on to them? b/c i aint too fond of the current coys center caps, and that damn "coys" sticker on there

put me on the list at the price mentioned, dont seem like a bad thing at all, thanks

The only reason I know of,... is that the stock caps won't fit the rotors.
Must be like the Boss 338 problem with the 1.25" wide rotors.
(I assume the 1" wide rotors will work)
All these do is space the stock Coys cap out 1/4" so they will bolt on,... nothing else.

What rotors do you have on your truck,... and do the Coys caps work?

gmikkels · 05-21-2010, 09:36 AM

Add me to the list.
Thanks,
Gene

mcbassin · 05-21-2010, 11:11 AM

New list
(5-21-10)

1)Jackyl9999
2)Lolife99 (2 sets) -Order Shipped
3)Tim R
4)Zoomin
5)Skeeterbug
6)big al 71
7)svgould
8)Number98
9)bigarmzz
10)gmikkels (2sets)

05-17-2010, 02:47 PM	#1
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB- Coy Wheel center cap spacers Update: I have cut one set and sent to Keith (lolife99) today. When he gets them he can test fit and let me know if there needs to be any changes made. As far as cost, what's fair? I don't really want to make any money. I just like helping folks out on here. I will be running on my time. So if I can get the material I will run them for the price of shipping plus say $10 a pair? It takes about 30 minutes to make a set of four. Mike __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 05-17-2010 at 07:57 PM.

05-17-2010, 07:19 PM	#4
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: WTB- Coy Wheel center cap spacers dont forget my set if all works out, just let me know if all works out __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

05-17-2010, 07:51 PM	#5
Tim R Registered User Join Date: Jan 2009 Location: bmt,tx Posts: 127	Re: WTB- Coy Wheel center cap spacers If they work I need a set too please Thanks Tim

05-17-2010, 10:02 PM	#6
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Re: WTB- Coy Wheel center cap spacers I would also be interested in a set if you have any left. Thanks __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

05-17-2010, 10:13 PM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: WTB- Coy Wheel center cap spacers So my running total are the following members looking for these, is: Edit: (as of 5-18-10) 1)Jackyl9999 2)Lolife99 (2 sets) 3)Tim R 4)Zoomin 5)Skeeterbug 6)big al 71 7)svgould __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 05-18-2010 at 11:22 AM.

05-18-2010, 11:22 AM	#12
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: WTB- Coy Wheel center cap spacers New list: (as of 5-18-10) 1)Jackyl9999 2)Lolife99 (2 sets) 3)Tim R 4)Zoomin 5)Skeeterbug 6)big al 71 7)svgould __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 05-18-2010 at 11:23 AM.

05-19-2010, 09:21 AM	#13
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: WTB- Coy Wheel center cap spacers Its stuff like this that makes this board great. Let me know how much I owe you. I am ready to get my center caps on. A big thanks to you for the effort. __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

05-19-2010, 01:54 PM	#14
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB- Coy Wheel center cap spacers Alright, Here are the pictures I promised. Keith should get the parts I sent him today. As soon as he says they work then I will start taking orders. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-19-2010, 11:58 PM	#15
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: WTB- Coy Wheel center cap spacers Looks good to me. __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

05-20-2010, 03:40 PM	#16
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: WTB- Coy Wheel center cap spacers Can you put me down for a set and let me know when you are ready to send them out...

05-19-2010, 03:04 PM	#17
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: WTB- Coy Wheel center cap spacers I did recieve them today. I need to check these on a friends set of Coys wheels. So if everyone will give me a day or two,... I'll find out, for sure, on the fit. They look great. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 05-19-2010 at 09:26 PM.

05-19-2010, 10:28 PM	#19
Tim R Registered User Join Date: Jan 2009 Location: bmt,tx Posts: 127	Re: WTB- Coy Wheel center cap spacers Thanks For taking the time to make the spacers . This has been the most helpful site. My truck wouldnt be anything close to what it is now without the knowledge and help from the people here Cant wait to fix the center caps on my wheels Tim

05-19-2010, 09:19 PM	#20
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Re: WTB- Coy Wheel center cap spacers I too think they look great....let me know how and when to pay. Thanks, Shane __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

05-20-2010, 04:44 PM	#21
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: WTB- Coy Wheel center cap spacers Added to the new list. (5-20-10) 1)Jackyl9999 2)Lolife99 (2 sets) -Order Shipped 3)Tim R 4)Zoomin 5)Skeeterbug 6)big al 71 7)svgould 8)Number98 __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 05-20-2010 at 04:45 PM.

05-21-2010, 08:48 AM	#22
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	Re: WTB- Coy Wheel center cap spacers why exactly do you need these center cap spacers on the coys? is it b/c it opens up options for different center caps to bolt on to them? b/c i aint too fond of the current coys center caps, and that damn "coys" sticker on there put me on the list at the price mentioned, dont seem like a bad thing at all, thanks __________________ 1987 350 TBI lowered 5/7



Register or Log In To remove these advertisements.

05-21-2010, 09:36 AM	#24
gmikkels Registered User Join Date: Dec 2007 Location: franktown colorado Posts: 375	Re: WTB- Coy Wheel center cap spacers Add me to the list. Thanks, Gene

05-21-2010, 11:11 AM	#25
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB- Coy Wheel center cap spacers New list (5-21-10) 1)Jackyl9999 2)Lolife99 (2 sets) -Order Shipped 3)Tim R 4)Zoomin 5)Skeeterbug 6)big al 71 7)svgould 8)Number98 9)bigarmzz 10)gmikkels (2sets) __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 05-23-2010 at 07:03 PM.

Register or Log In To remove these advertisements.