sittin lower! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

3r!c84 · 06-05-2010, 06:49 PM

summit has them

1LoC10 · 06-05-2010, 06:52 PM

sits perfect, i wouldnt change it

joe1982 · 06-05-2010, 06:53 PM

Quote:

Originally Posted by N2TRUX

I don't think it's too low, but your never going to be happy with those 3" springs. They are too short to work right on these trck. Your better off with 3" spindle and 2" spring.

youre right, thats what i think most people that go that route feel like, if i do switch out my springs ill be close though, 2.5'' spindle and a 2''spring

1LoC10 · 06-05-2010, 06:57 PM

Quote:

Originally Posted by northern 85

Where?

They have these, but they dont have the slots cut in them like some trucks have
http://wheelvintiques.myshopify.com/...lver-42-series

joe1982 · 06-05-2010, 07:31 PM

they have the truck wheels on summit, they are the 42 series, my dad ordered them.
http://www.summitracing.com/parts/WVI-42-580504/

KQQL IT · 06-05-2010, 07:36 PM

Looks Sweet. Id like to see it when you flip the back too.

3r!c84 · 06-05-2010, 08:27 PM

Quote:

Originally Posted by joe1982

they have the truck wheels on summit, they are the 42 series, my dad ordered them.
http://www.summitracing.com/parts/WVI-42-580504/

thos are stock 15x8 the 15x10 are 105$ each
http://www.summitracing.com/parts/WVI-42-5005042/

Dapper Dan · 06-05-2010, 09:10 PM

What's the problem with 3" springs, is it ride quality?

joe1982 · 06-05-2010, 09:55 PM

Quote:

Originally Posted by Dapper Dan

What's the problem with 3" springs, is it ride quality?

The ride quality is fine, but combined with my spindles, its just a bit much for a DD around here, my A arms scrape at every speed bump.

3r!c84 · 06-05-2010, 10:11 PM

how low are you from ground to Aarms

joe1982 · 06-06-2010, 07:06 PM

this low

joelsdelone · 06-06-2010, 07:20 PM

looking sick man. i would let it ride. thanks for your service btw.

silvereagle07 · 06-07-2010, 11:32 AM

My truck sits the same way. You just have to dodge or slow down on speed bumps. Watch out for man hole covers.

Justin36 · 06-07-2010, 03:06 PM

Looks Great.. Nice Job

justpball · 06-07-2010, 03:14 PM

looks tits bro! I would just drop the back 1in lower and go from there

joe1982 · 06-07-2010, 04:25 PM

Thanks for the kind words fellas, I'm on duty today, so tomorrow I'm going to try and leave work to finish up the rear. Ill post some pics

Baron · 06-08-2010, 09:11 AM

Quote:

Originally Posted by joe1982

this low

Do you not have a front Sway Bar on your truck???

joe1982 · 06-08-2010, 09:29 AM

I have one, just haven't thrown it in yet.

Baron · 06-08-2010, 10:10 AM

That can help some with your scraping some if the sway bar is on.
Without it if you hit a bump offcenter at all the truck will tend to rock side
side more and might cause more suspension compression on one side
and then you bottom the A-arm of frame out.
Now if your just that low your going to scape if you go straight over a speedbump then its the ole go over them at an angle routine.
Have had to do that alot myself on my SCCA solo two autocross street driver.

joe1982 · 06-08-2010, 08:25 PM

lowered the rear today, total of an inch and some change. im sitting at about a 5ish 7ish. i only have about 3inches of clearance out back!! so i am getting on summit and getting me a notch kit righht meow!

kvn1011 · 06-08-2010, 08:56 PM

LQQKin good!!

atopper · 06-08-2010, 09:29 PM

very nice !!!!! i think they should just make the roads nicer haha problem solved !! perfect stance in my honest opinion. wonder how a 30" tall drag radial would tuck in the back at that ride height? 295/65R15 MT DR 29.6" tall , 12.4" section width

atopper · 06-08-2010, 09:34 PM

http://www.summitracing.com/search/D...?Ns=Rank%7cAsc

justpball · 06-09-2010, 09:48 AM

looks great!

lo72 · 06-12-2010, 09:24 AM

Joe1982 truck for truck, i believe you have one of the best sitting truck on this board without the high dollar alloy wheels and exotic suspensions, don't get me wrong they are all sharp rides. So tell me what would you do different to get this look? I recall you talking about bottoming out is this still a problem or just something you have to deal with? how did you drop the rear? All in all this is one sharp truck! Where did you get the goodyear tires in a 295?

06-05-2010, 06:49 PM	#26
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: sittin lower! summit has them __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

06-05-2010, 06:52 PM	#27
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: sittin lower! sits perfect, i wouldnt change it __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

06-05-2010, 07:31 PM	#30
joe1982 .. !WAR FEDOR! .. Join Date: Mar 2009 Location: Oceanside Ca Posts: 546	Re: sittin lower! they have the truck wheels on summit, they are the 42 series, my dad ordered them. http://www.summitracing.com/parts/WVI-42-580504/ __________________ "san diego chargers #1"

06-05-2010, 07:36 PM	#31
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,191	Re: sittin lower! Looks Sweet. Id like to see it when you flip the back too. __________________ " That didnt make it any newer " " Dont antique the equipment "

06-05-2010, 09:10 PM	#33
Dapper Dan Registered User Join Date: Mar 2009 Location: Middle River, MD Posts: 171	Re: sittin lower! What's the problem with 3" springs, is it ride quality?

06-05-2010, 10:11 PM	#35
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: sittin lower! how low are you from ground to Aarms __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

06-06-2010, 07:06 PM	#36
joe1982 .. !WAR FEDOR! .. Join Date: Mar 2009 Location: Oceanside Ca Posts: 546	Re: sittin lower! this low Attached Images __________________ "san diego chargers #1" Last edited by joe1982; 06-06-2010 at 07:07 PM.

06-06-2010, 07:20 PM	#37
joelsdelone Registered User Join Date: Aug 2009 Location: Decatur, Georgia Posts: 30	Re: sittin lower! looking sick man. i would let it ride. thanks for your service btw.

06-07-2010, 11:32 AM	#38
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: sittin lower! My truck sits the same way. You just have to dodge or slow down on speed bumps. Watch out for man hole covers. __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

06-07-2010, 03:06 PM	#39
Justin36 Registered User Join Date: Dec 2009 Location: Selmer, Tennessee Posts: 744	Re: sittin lower! Looks Great.. Nice Job __________________ Justin

06-07-2010, 03:14 PM	#40
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: sittin lower! looks tits bro! I would just drop the back 1in lower and go from there __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

06-07-2010, 04:25 PM	#41
joe1982 .. !WAR FEDOR! .. Join Date: Mar 2009 Location: Oceanside Ca Posts: 546	Re: sittin lower! Thanks for the kind words fellas, I'm on duty today, so tomorrow I'm going to try and leave work to finish up the rear. Ill post some pics __________________ "san diego chargers #1"

06-08-2010, 09:29 AM	#43
joe1982 .. !WAR FEDOR! .. Join Date: Mar 2009 Location: Oceanside Ca Posts: 546	Re: sittin lower! I have one, just haven't thrown it in yet. __________________ "san diego chargers #1"

06-08-2010, 10:10 AM	#44
Baron Registered User Join Date: Jun 2010 Location: Indianapolis Indiana Posts: 12	Re: sittin lower! That can help some with your scraping some if the sway bar is on. Without it if you hit a bump offcenter at all the truck will tend to rock side side more and might cause more suspension compression on one side and then you bottom the A-arm of frame out. Now if your just that low your going to scape if you go straight over a speedbump then its the ole go over them at an angle routine. Have had to do that alot myself on my SCCA solo two autocross street driver.

06-08-2010, 08:25 PM	#45
joe1982 .. !WAR FEDOR! .. Join Date: Mar 2009 Location: Oceanside Ca Posts: 546	Re: sittin lower! lowered the rear today, total of an inch and some change. im sitting at about a 5ish 7ish. i only have about 3inches of clearance out back!! so i am getting on summit and getting me a notch kit righht meow! Attached Images __________________ "san diego chargers #1"



Register or Log In To remove these advertisements.

06-08-2010, 08:56 PM	#46
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: sittin lower! LQQKin good!!

06-08-2010, 09:29 PM	#47
atopper box junkie !! Join Date: Jan 2010 Location: Biglerville , PA Posts: 185	Re: sittin lower! very nice !!!!! i think they should just make the roads nicer haha problem solved !! perfect stance in my honest opinion. wonder how a 30" tall drag radial would tuck in the back at that ride height? 295/65R15 MT DR 29.6" tall , 12.4" section width __________________ - 500mg of crazy a day ...... will keep the straight jacket away !!! :burno

06-08-2010, 09:34 PM	#48
atopper box junkie !! Join Date: Jan 2010 Location: Biglerville , PA Posts: 185	Re: sittin lower! http://www.summitracing.com/search/D...?Ns=Rank%7cAsc __________________ - 500mg of crazy a day ...... will keep the straight jacket away !!! :burno

06-09-2010, 09:48 AM	#49
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: sittin lower! looks great! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

06-12-2010, 09:24 AM	#50
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: sittin lower! Joe1982 truck for truck, i believe you have one of the best sitting truck on this board without the high dollar alloy wheels and exotic suspensions, don't get me wrong they are all sharp rides. So tell me what would you do different to get this look? I recall you talking about bottoming out is this still a problem or just something you have to deal with? how did you drop the rear? All in all this is one sharp truck! Where did you get the goodyear tires in a 295?

Register or Log In To remove these advertisements.