Fine69 took my truck : ( - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70cst** · 05-22-2011, 11:14 PM

Just bought a set of brackets for the 400 Kickdown switch that fine69 will install. We are getting closer.

Jerry Jones · 05-23-2011, 03:07 PM

Where did you send the carb for it's rebuild?

**70cst** · 05-23-2011, 03:30 PM

Quote:

Originally Posted by Jerry Jones

Where did you send the carb for it's rebuild?

Fine69's shop has a place in CA. that brings them back to like new spec's and condition. I don't know the name of the business but I can get more info if you want.

**Dieselwrencher** · 05-23-2011, 03:59 PM

I bet you're getting really anxious to get behind the wheel of it? It sounds like it's almost there now!

**70cst** · 05-23-2011, 04:14 PM

Quote:

Originally Posted by Dieselwrencher

I bet you're getting really anxious to get behind the wheel of it? It sounds like it's almost there now!

In three letters YES The suspension will be correct, I will have the kick down switch working as it should plus the brakes will be 100% functional. Fun times are just days away. Plus new wheels and tires

DaBigKahuna · 05-23-2011, 06:35 PM

Quote:

Originally Posted by 70cst

Fine69's shop has a place in CA. that brings them back to like new spec's and condition. I don't know the name of the business but I can get more info if you want.

Could it be The Carb Shop? http://www.thecarbshop.com/

He's been around for decades... great work.

**70cst** · 05-23-2011, 06:59 PM

Quote:

Originally Posted by DaBigKahuna

Could it be The Carb Shop? http://www.thecarbshop.com/

He's been around for decades... great work.

I'll have to ask fine69. All I know it needed a lot of luvin.

Jerry Jones · 05-24-2011, 01:40 AM

Quote:

Originally Posted by 70cst

I'll have to ask fine69. All I know it needed a lot of luvin.

Ya, if you could find out that would be cool, I have been working on LJ's truck (mine now) and the carb is in need of a good rebuild.

**70cst** · 05-29-2011, 02:28 AM

I think fine69 said it was the Carb Shop. One issue they found was the linkage wasn't 100% correct. It is finished and on its way home.

Jerry Jones · 05-29-2011, 09:01 PM

Quote:

Originally Posted by 70cst

I think fine69 said it was the Carb Shop. One issue they found was the linkage wasn't 100% correct. It is finished and on its way home.

Thanks, the ol' GMC runs like a top but I think there is a sticky float. It either loads up or runs out of gas while driving. I gave it a Seafoam treatment and it is 100 times better but it still needs some attention. Hope your rig does everything you hope it does... exciting times!

**70cst** · 05-29-2011, 09:57 PM

Quote:

Originally Posted by Jerry Jones

Thanks, the ol' GMC runs like a top but I think there is a sticky float. It either loads up or runs out of gas while driving. I gave it a Seafoam treatment and it is 100 times better but it still needs some attention. Hope your rig does everything you hope it does... exciting times!

It is alomost time for those famous words: Soon, very soon

**70cst** · 06-06-2011, 05:56 PM

Today fine69 recieved the Carb back from Ca. Mike said it looks NOS or even better. I will verify where he had the Carb rebuilt and pass it on. It might be the Carb Shop but I am not 100% sure.

**john** · 06-06-2011, 07:39 PM

Dont forget the pics of the new wheels.

**70cst** · 06-06-2011, 08:13 PM

Quote:

Originally Posted by john

Dont forget the pics of the new wheels.

Pics will be forth coming. I also bought a new Extang Revolution bed cover from mbgmike.

**70cst** · 06-06-2011, 08:15 PM

Quote:

Originally Posted by john

Dont forget the pics of the new wheels.

Pics will be forth coming. I also bought a new Extang Revolution bed cover from mbgmike.

gcburdic · 06-07-2011, 10:08 AM

what was the price to rebuild the carb?

**70cst** · 06-07-2011, 10:23 AM

Quote:

Originally Posted by gcburdic

what was the price to rebuild the carb?

Fine69 will be sending me pics of the carb, name of the business and cost of carb rebuilder. Once I get this info I will post the info.

**70cst** · 06-14-2011, 10:29 PM

Ok...
For those asking...the carb was sent to RECarbCo Carburetors in Pittsburg Ca. and let me say...they did one HECK of a job. It looks NOS. Foir those who want a PH # PM me and I will pass it on.

**70cst** · 07-24-2011, 02:13 PM

http://www.recarbco.com/

The above is the place where my Q Jet was rebuilt. They did an absolutely excellent job. The carb looks like an NOS Carb with a 1 yr warranty. The LINK is above. I got the Circuit Rider home last night about 11:45pm. It ran flawlessly. Fine69 has the Circuit Rider running, handling, and riding better than factory new, I just need to get use to driving a BB 40 yr old truck. The only issue is the Extang Revolution Tonnue Cover isn’t fitting properly so I will need to address that. I will take the truck to Curt’s for a few minor issues that need to be fixed and then the Circuit Rider will be back on the prowl--on the highways and byways. Then again are our trucks ever really finished?

**1970 CST Short Wide** · 07-24-2011, 07:03 PM

Quote:

Originally Posted by 70cst

http://www.recarbco.com/

The above is the place where my Q Jet was rebuilt. They did an absolutely excellent job. The carb looks like an NOS Carb with a 1 yr warranty. The LINK is above. I got the Circuit Rider home last night about 11:45pm. It ran flawlessly. Fine69 has the Circuit Rider running, handling, and riding better than factory new, I just need to get use to driving a BB 40 yr old truck. The only issue is the Extang Revolution Tonnue Cover isn’t fitting properly so I will need to address that. I will take the truck to Curt’s for a few minor issues that need to be fixed and then the Circuit Rider will be back on the prowl--on the highways and byways. Then again are our trucks ever really finished?

Noah, the owner, is a good friend of mine, I'll have to see if he'll cut us a discount for this Free advertizing

**70cst** · 07-24-2011, 09:28 PM

Quote:

Originally Posted by 1970 CST Short Wide

Noah, the owner, is a good friend of mine, I'll have to see if he'll cut us a discount for this Free advertizing

He has my vote. As mentioned he did an excellent job on my carb. Maybe he should become a Vendor because folks are always looking for a "good" carb rebuilder.

**Dieselwrencher** · 07-25-2011, 01:48 AM

I'm glad to hear you have circuit rider back and almost done, in this phase.

As you said, are they ever really finished? I don't think so, but that's just me.

gcburdic · 07-25-2011, 09:05 AM

Quote:

Originally Posted by 70cst

I got the Circuit Rider home last night about 11:45pm. It ran flawlessly. Fine69 has the Circuit Rider running, handling, and riding better than factory new, I just need to get use to driving a BB 40 yr old truck. The only issue is the Extang Revolution Tonnue Cover isn’t fitting properly so I will need to address that. I will take the truck to Curt’s for a few minor issues that need to be fixed and then the Circuit Rider will be back on the prowl--on the highways and byways. Then again are our trucks ever really finished?

Come on Dwayne...you know how it works....

**70cst** · 07-25-2011, 09:35 AM

Quote:

Originally Posted by gcburdic

Come on Dwayne...you know how it works....

Soon...

05-22-2011, 11:14 PM	#26
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Fine69 took my truck : ( Just bought a set of brackets for the 400 Kickdown switch that fine69 will install. We are getting closer. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-23-2011, 03:07 PM	#27
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: Fine69 took my truck : ( Where did you send the carb for it's rebuild? __________________ RIP El Jay! Love you brother!

05-23-2011, 03:59 PM	#29
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Fine69 took my truck : ( I bet you're getting really anxious to get behind the wheel of it? It sounds like it's almost there now! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-29-2011, 02:28 AM	#34
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Fine69 took my truck : ( I think fine69 said it was the Carb Shop. One issue they found was the linkage wasn't 100% correct. It is finished and on its way home. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-06-2011, 05:56 PM	#37
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Fine69 took my truck : ( Today fine69 recieved the Carb back from Ca. Mike said it looks NOS or even better. I will verify where he had the Carb rebuilt and pass it on. It might be the Carb Shop but I am not 100% sure. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-06-2011, 07:39 PM	#38
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Fine69 took my truck : ( Dont forget the pics of the new wheels. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

06-07-2011, 10:08 AM	#41
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Fine69 took my truck : ( what was the price to rebuild the carb? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

06-14-2011, 10:29 PM	#43
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Fine69 took my truck : ( Ok... For those asking...the carb was sent to RECarbCo Carburetors in Pittsburg Ca. and let me say...they did one HECK of a job. It looks NOS. Foir those who want a PH # PM me and I will pass it on. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

07-24-2011, 02:13 PM	#44
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Fine69 took my truck : ( http://www.recarbco.com/ The above is the place where my Q Jet was rebuilt. They did an absolutely excellent job. The carb looks like an NOS Carb with a 1 yr warranty. The LINK is above. I got the Circuit Rider home last night about 11:45pm. It ran flawlessly. Fine69 has the Circuit Rider running, handling, and riding better than factory new, I just need to get use to driving a BB 40 yr old truck. The only issue is the Extang Revolution Tonnue Cover isn’t fitting properly so I will need to address that. I will take the truck to Curt’s for a few minor issues that need to be fixed and then the Circuit Rider will be back on the prowl--on the highways and byways. Then again are our trucks ever really finished? __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

07-25-2011, 01:48 AM	#47
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Fine69 took my truck : ( I'm glad to hear you have circuit rider back and almost done, in this phase. As you said, are they ever really finished? I don't think so, but that's just me. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.