VA PRICES REDUCED Nice Cab, frame, bed and 70 truck part out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 05-30-2012, 02:04 AM

Quote:

Originally Posted by VA72C10

It will need cups in the fenders and work on the leading edge of the hood and honestly a LOT of work to the core support or a new one...but it's free

When can I expect you?

I'll throw in several other parts if you can pick up soon. Need to clear up some room and sell this for the cash for the new project's needs...

If you can conjure up a decent shortbed... I could make it out there quite possibly for 68 clip and some wheel and deal.

VA72C10 · 05-30-2012, 02:17 AM

Quote:

Originally Posted by HeavyMetalChevy

If you can conjure up a decent shortbed... I could make it out there quite possibly for 68 clip and some wheel and deal.

It is a 67 clip. Although I have some nice 68 fenders. I am going to be selling the short step bed from my new project to get a fleet bed
Posted via Mobile Device

VA72C10 · 05-30-2012, 02:22 AM

Quote:

Originally Posted by LEEVON

If it's not a hassle, would you be able to post pics of the harness and fuse block?

Thanks~Leevon

Okay, I have two more nice ones but need to find them in my swap meet bins. I did find the nicest one I've ever had. Looks nos and has correct colored fuses. Was from my 72 super with a/c am/fm and tach and cargo light. 160 shipped for this one. Can take more pics if needed
Posted via Mobile Device

HeavyMetalChevy · 05-30-2012, 02:23 AM

Quote:

Originally Posted by VA72C10

It is a 67 clip. Although I have some nice 68 fenders. I am going to be selling the short step bed from my new project to get a fleet bed
Posted via Mobile Device

I thought it was about time for you to chime in.. Ok...67 clip is just as well... Where are you stashing all these projects bro? You wanna a great project...I am wantting to sell my entire 70 C-20 project... Rust free everything...with painted frame. I will be taking my built motor out with TH400and throwing in a really solid 350/350 combo with like 88,XXX miles on the drivetrain. I really want to start getting my 71 swb and 67-68 body build going. ANy thoughts?

Oh yeah...gauges are on the way..just have to print label and gathering up door glass as well.

VA72C10 · 05-30-2012, 02:29 AM

I only have room for one project realistically. Have three here now one waiting for title issues I swapped parts for and the 72 swb I am buying so I need to get these parts sold then go from there. The more I look at the truck (and I hate to do this) the more I realize I will maximize my return by selling each piece part by part

Posted via Mobile Device

HeavyMetalChevy · 05-30-2012, 02:32 AM

Quote:

Originally Posted by VA72C10

I only have room for one project realistically. Have three here now one waiting for title issues I swapped parts for and the 72 swb I am buying so I need to get these parts sold then go from there. The more I look at the truck (and I hate to do this) the more I realize I will maximize my return by selling each piece part by part

Posted via Mobile Device

I am in the same boat...heck we all are... I was not too fond of stepsides...but at this point I am willing to do whatever to get a bed on this truck! I have a sweet set of fleetside bedsides local for great price...but then got to find the bottom to match???

VA72C10 · 05-30-2012, 02:39 AM

Quote:

Originally Posted by HeavyMetalChevy

I am in the same boat...heck we all are... I was not too fond of stepsides...but at this point I am willing to do whatever to get a bed on this truck! I have a sweet set of fleetside bedsides local for great price...but then got to find the bottom to match???

if they are nice they should already be in your yard

One day you'll find a bed with a nice floor and hammered sides....
or you can always buy a header panel and crossmembers and make a wood bed...Heck, I'd buy them if they were close and do just that...

HeavyMetalChevy · 05-30-2012, 02:41 AM

Quote:

Originally Posted by VA72C10

if they are nice they should already be in your yard

One day you'll find a bed with a nice floor and hammered sides....
or you can always buy a header panel and crossmembers and make a wood bed...Heck, I'd buy them if they were close and do just that...

ok you just "schooled me once again... I have a header panel too for a wood bed... wth is wrong with me.... muy loco

VA72C10 · 05-30-2012, 02:17 PM

Ttt. Lots of local interest on this but no commitment. Would rather see it all go together so it can be finished. But if no sale by this weekend will be parted completely
Posted via Mobile Device

VA72C10 · 05-30-2012, 05:07 PM

Have someone coming to look at the frame and possibly bed tomorrow and a guy said he will take the cab so this might be sold.... will update.
Posted via Mobile Device

HeavyMetalChevy · 05-30-2012, 05:54 PM

Quote:

Originally Posted by VA72C10

Have someone coming to look at the frame and possibly bed tomorrow and a guy said he will take the cab so this might be sold.... will update.
Posted via Mobile Device

Good for you!

**LEEVON** · 05-30-2012, 06:11 PM

Thanks for the harness pics, before I make anymore work for you I'm pulling my harness to see how bad it really is. If it's not salvageable I'll be in touch!

VA72C10 · 05-30-2012, 06:24 PM

Quote:

Originally Posted by HeavyMetalChevy

Good for you!

thanks...hope they do show....you know how craigslist can be but I've talked to one of the guys and it's for a father son project which is cool!

Quote:

Originally Posted by LEEVON

Thanks for the harness pics, before I make anymore work for you I'm pulling my harness to see how bad it really is. If it's not salvageable I'll be in touch!

No prob, If I run across the other harnesses I'll post them up.

VA72C10 · 06-01-2012, 01:16 AM

Frame is back available...guy took my other 5 lug frame I didn't want to sell but needed space and project $$$

Bed and cab sold pending payments and pickup

VA72C10 · 06-03-2012, 01:52 AM

bed sold and picked up.

Cab is pending but may be a couple weeks till guy comes to look....so it's first dibs on it.

Offering cab, doors, and complete frame as is with all parts included And the 67 front clip for 950. see list in first post....over 1000 in parts if parted out...

VA72C10 · 06-06-2012, 04:51 AM

looks like cab is sold pending payment Saturday. Frame and parts listed still up for grabs...

VA72C10 · 06-07-2012, 02:05 AM

ttt for the frame and misc parts...

VA72C10 · 06-10-2012, 11:44 AM

Cab paid for. Frame and misc parts available
Posted via Mobile Device

VA72C10 · 06-10-2012, 11:46 AM

Parts
Posted via Mobile Device

Bennett68C10 · 06-10-2012, 03:34 PM

Earlier you mentioned a Swb stepside bed you had for sale. Any pictures of that, i'm interested pending the shape of it. Also interested in the 68 fenders you stated you had that were in good shape.
Posted via Mobile Device

VA72C10 · 06-10-2012, 04:03 PM

Quote:

Originally Posted by Bennett--G4L

Earlier you mentioned a Swb stepside bed you had for sale. Any pictures of that, i'm interested pending the shape of it. Also interested in the 68 fenders you stated you had that were in good shape.
Posted via Mobile Device

I will get pictures of the fenders tonight. Was going to use them but decided to get true y67 fenders since I'm going to plug the marker lights.

Will be tomorrow or tues before I get pics of the bed.
Posted via Mobile Device

Whittaker · 06-10-2012, 04:05 PM

Do you have the drive shaft the front part from trans through carrier bearing?

VA72C10 · 06-10-2012, 04:07 PM

Quote:

Originally Posted by Whittaker

Do you have the drive shaft the front part from trans through carrier bearing?

Yes, are you wanting the carrier bearing also? This was a 307v8 truck motor mounts in front holes with a 3spd tranny.
Posted via Mobile Device

rusty67 · 06-11-2012, 06:39 PM

Can you ship the bed floor? Is it in decent shape?

VA72C10 · 06-11-2012, 06:42 PM

bed already sold and was picked up.

05-30-2012, 02:29 AM	#30
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out I only have room for one project realistically. Have three here now one waiting for title issues I swapped parts for and the 72 swb I am buying so I need to get these parts sold then go from there. The more I look at the truck (and I hate to do this) the more I realize I will maximize my return by selling each piece part by part Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-30-2012, 02:17 PM	#34
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out Ttt. Lots of local interest on this but no commitment. Would rather see it all go together so it can be finished. But if no sale by this weekend will be parted completely Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-30-2012, 05:07 PM	#35
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out Have someone coming to look at the frame and possibly bed tomorrow and a guy said he will take the cab so this might be sold.... will update. Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-30-2012, 06:11 PM	#37
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out Thanks for the harness pics, before I make anymore work for you I'm pulling my harness to see how bad it really is. If it's not salvageable I'll be in touch! __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

06-01-2012, 01:16 AM	#39
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out Frame is back available...guy took my other 5 lug frame I didn't want to sell but needed space and project $$$ Bed and cab sold pending payments and pickup __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-03-2012, 01:52 AM	#40
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out bed sold and picked up. Cab is pending but may be a couple weeks till guy comes to look....so it's first dibs on it. Offering cab, doors, and complete frame as is with all parts included And the 67 front clip for 950. see list in first post....over 1000 in parts if parted out... __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-06-2012, 04:51 AM	#41
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out looks like cab is sold pending payment Saturday. Frame and parts listed still up for grabs... __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-07-2012, 02:05 AM	#42
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out ttt for the frame and misc parts... __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-10-2012, 11:44 AM	#43
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out Cab paid for. Frame and misc parts available Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-10-2012, 11:46 AM	#44
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out Parts Posted via Mobile Device Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-10-2012, 03:34 PM	#45
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out Earlier you mentioned a Swb stepside bed you had for sale. Any pictures of that, i'm interested pending the shape of it. Also interested in the 68 fenders you stated you had that were in good shape. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

06-10-2012, 04:05 PM	#47
Whittaker Registered User Join Date: Feb 2011 Location: Champaign, Illinois Posts: 110	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out Do you have the drive shaft the front part from trans through carrier bearing?

06-11-2012, 06:39 PM	#49
rusty67 Registered User Join Date: May 2012 Location: Dallas, TX Posts: 57	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out Can you ship the bed floor? Is it in decent shape?

06-11-2012, 06:42 PM	#50
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICES REDUCED Nice Cab, frame, bed and 70 truck part out bed already sold and was picked up. __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.