CA WTT 71-72 CPP "new" casting drop spindles - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Undone · 11-29-2012, 04:53 PM

Inline also for spindles.

shawno72 · 11-29-2012, 05:02 PM

These are really nice guys. They are a much cleaner casting than the old. Also they appear to be painted metal instead of raw.

shawno72 · 11-30-2012, 01:17 AM

Update guys. I looked at the actual part number on the spindles and it is CP4S4. That means that these are 73-87 spindles. Does the guys who showed interest still want to buy them knowing that? CPP strikes again

Posted via Mobile Device

HotRod C/10 · 11-30-2012, 01:25 AM

Shawn will they not take them back? did you pay with a credit card?

shawno72 · 11-30-2012, 01:47 AM

Quote:

Originally Posted by HotRod C/10

Shawn will they not take them back? did you pay with a credit card?

I contacted cppjeff. It's a long story but I'm sure something can be done. I didn't buy them directly from CPP per say.

if not I'm sure someone will want them.
Posted via Mobile Device

HotRod C/10 · 11-30-2012, 01:54 AM

Ahh gotcha, down here we call that "the Movida" .......maybe try the 73-87 forum too?

shawno72 · 11-30-2012, 09:42 AM

Missinfishin must be out fishin and has not responded to my pm so Clyde65 pm sent.
Posted via Mobile Device

shawno72 · 11-30-2012, 10:27 AM

Mods I am going to reopen a for sale thread in the 73-87 section.
Posted via Mobile Device

**lolife99** · 11-30-2012, 11:13 AM

Quote:

Originally Posted by shawno72

Mods I am going to reopen a for sale thread in the 73-87 section.
Posted via Mobile Device

You need to link that thread to this one,... or delete this thread.
No double posts per forum rules.

**lolife99** · 11-30-2012, 11:18 AM

So these were 73-87 CP4S4 spindles in a 71-72 CP4S3 box?

shawno72 · 11-30-2012, 12:06 PM

Quote:

Originally Posted by lolife99

So these were 73-87 CP4S4 spindles in a 71-72 CP4S3 box?

Yep and sadly CPP said they looked and made sure that they were sending me 71-72 spindles.

shawno72 · 11-30-2012, 01:40 PM

Clyde passed, Undone you are up. Pm sent.

shawno72 · 11-30-2012, 01:57 PM

Quote:

Originally Posted by lolife99

So these were 73-87 CP4S4 spindles in a 71-72 CP4S3 box?

UPDATE!!! lolife you need to know this for your fact thread. ALL "New Design" spindles are cast with the CP4S4 part number in them. According to CPPJeff he said that they are cast that way then the holes for the ball joints and the tie rods are drilled for the appropriate years. SO......these are indeed 71-72 spindles!! Man what confusion.

**leddzepp** · 11-30-2012, 02:09 PM

It is not unusual for spindles to be cast with the same part number, and then drilled for the appropriate year tie rods/ball joints. McGaugheys does the same thing and I imagine others do it as well. While it does not really make any sense, CPP is not the only company that does this.

shawno72 · 11-30-2012, 04:51 PM

Quote:

Originally Posted by leddzepp

It is not unusual for spindles to be cast with the same part number, and then drilled for the appropriate year tie rods/ball joints. McGaugheys does the same thing and I imagine others do it as well. While it does not really make any sense, CPP is not the only company that does this.

So then that answers the question that if you buy a set from Summit you will not likely get the new design.

**leddzepp** · 11-30-2012, 04:59 PM

I guess it would be a crapshoot.
Posted via Mobile Device

**lolife99** · 11-30-2012, 05:00 PM

Quote:

Originally Posted by shawno72

UPDATE!!! lolife you need to know this for your fact thread. ALL "New Design" spindles are cast with the CP4S4 part number in them. According to CPPJeff he said that they are cast that way then the holes for the ball joints and the tie rods are drilled for the appropriate years. SO......these are indeed 71-72 spindles!! Man what confusion.

That's still a huge F#CK UP on CPP's part.
Out of all the numbers in the world,... that you could cast on a part,...
why would you use a "current" part number that is associated with a specific part,... like the 73-87 drop spindles.
Something like "CSC10" or "CS6087" would have made more sense.

How do they even know which spindles to put in which box at the CPP factory,... with logic like that.

At least Belltech has 3100 or 3200 or 3120 cast on theirs.
I think I will just stay away from CPP.

shawno72 · 11-30-2012, 05:33 PM

Quote:

Originally Posted by lolife99

That's still a huge F#CK UP on CPP's part.
Out of all the numbers in the world,... that you could cast on a part,...
why would you use a "current" part number that is associated with a specific part,... like the 73-87 drop spindles.
Something like "CSC10" or "CS6087" would have made more sense.

How do they even know which spindles to put in which box at the CPP factory,... with logic like that.

At least Belltech has 3100 or 3200 or 3120 cast on theirs.
I think I will just stay away from CPP.

Yeah I was little suprised when I got off the phone with Jeff and he said the way he was able to tell was to stuff a ball joint into the hole and make sure. No offense to you Jeff, I know it's not you but CPP has got to find a better way to determine whats in their hands at the moment.

BB72CHEVKT · 11-30-2012, 05:58 PM

that is jacked up!

shawno72 · 11-30-2012, 06:00 PM

Quote:

Originally Posted by BB72CHEVKT

that is jacked up!

All to get lowered down

HotRod C/10 · 11-30-2012, 11:20 PM

the price we pay to live the "LOW LIFE".

shawno72 · 11-30-2012, 11:28 PM

And rollin in the "low" lane.
Posted via Mobile Device

C10_ustacould · 11-30-2012, 11:30 PM

Seems to be a "low" down dirty shame.

shawno72 · 11-30-2012, 11:32 PM

Maybe I should "lower" the price.
Posted via Mobile Device

HotRod C/10 · 12-01-2012, 12:33 AM

Don't stoop that "low"........
Posted via Mobile Device

11-29-2012, 04:53 PM	#26
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: WTT 71-72 CPP "new" casting drop spindles Inline also for spindles.

11-29-2012, 05:02 PM	#27
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTT 71-72 CPP "new" casting drop spindles These are really nice guys. They are a much cleaner casting than the old. Also they appear to be painted metal instead of raw. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-30-2012, 01:17 AM	#28
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTT 71-72 CPP "new" casting drop spindles Update guys. I looked at the actual part number on the spindles and it is CP4S4. That means that these are 73-87 spindles. Does the guys who showed interest still want to buy them knowing that? CPP strikes again Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-30-2012, 01:25 AM	#29
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTT 71-72 CPP "new" casting drop spindles Shawn will they not take them back? did you pay with a credit card? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-30-2012, 01:54 AM	#31
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTT 71-72 CPP "new" casting drop spindles Ahh gotcha, down here we call that "the Movida" .......maybe try the 73-87 forum too? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-30-2012, 09:42 AM	#32
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTT 71-72 CPP "new" casting drop spindles Missinfishin must be out fishin and has not responded to my pm so Clyde65 pm sent. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-30-2012, 10:27 AM	#33
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTT 71-72 CPP "new" casting drop spindles Mods I am going to reopen a for sale thread in the 73-87 section. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-30-2012, 11:18 AM	#35
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,690	Re: WTT 71-72 CPP "new" casting drop spindles So these were 73-87 CP4S4 spindles in a 71-72 CP4S3 box? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-30-2012, 01:40 PM	#37
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTT 71-72 CPP "new" casting drop spindles Clyde passed, Undone you are up. Pm sent. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-30-2012, 02:09 PM	#39
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,994	Re: WTT 71-72 CPP "new" casting drop spindles It is not unusual for spindles to be cast with the same part number, and then drilled for the appropriate year tie rods/ball joints. McGaugheys does the same thing and I imagine others do it as well. While it does not really make any sense, CPP is not the only company that does this. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

11-30-2012, 04:59 PM	#41
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,994	Re: WTT 71-72 CPP "new" casting drop spindles I guess it would be a crapshoot. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

11-30-2012, 05:58 PM	#44
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: WTT 71-72 CPP "new" casting drop spindles that is jacked up! __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

11-30-2012, 11:20 PM	#46
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTT 71-72 CPP "new" casting drop spindles the price we pay to live the "LOW LIFE". __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-30-2012, 11:28 PM	#47
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTT 71-72 CPP "new" casting drop spindles And rollin in the "low" lane. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-30-2012, 11:30 PM	#48
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: WTT 71-72 CPP "new" casting drop spindles Seems to be a "low" down dirty shame. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD



Register or Log In To remove these advertisements.

11-30-2012, 11:32 PM	#49
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTT 71-72 CPP "new" casting drop spindles Maybe I should "lower" the price. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-01-2012, 12:33 AM	#50
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTT 71-72 CPP "new" casting drop spindles Don't stoop that "low"........ Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

Register or Log In To remove these advertisements.