PA no shipping parts

[2772]

Originally Posted by midniteblues

few parts for pickup only

1. 67 complete crossmember.$50

2.71 lwb frame body mount brackets have been cut off but I have them $100

3.six lug 12bolt 373 open rear from my 67(narrow) $50

4.4 6 lug steel wheels 15x6 tires hold air but they are cracked $25

5. 71 disc brake spindles and rotors $50

6. lwb stepside bed sides these are a lil' rough but very fixable $75

7.lwb step side steps$25

8.lwb drive shaft from the above frame that had a 292/t350 $25

9.front painted bumper has a few bumps along bottom edge $25

10.rear chrome bumper good dd but has a hole where the trailer plug is $40

11. not pictured but I have a pretty decent rear slider the latch is broke and some of the seals are crack but the frame and overall it is very nice $40

12.also not pictured 4 oe springs front/rear $20

13.90's flairside short bed (seen off too the side) $250

I should have a pair of trailing arms here in a few weeks that should complete the frame. I also have a bunch of small stuff that goes with it(manual steering gear,used shocks, brackets,u bolts ect.)this big stuff is just too heavy too ship through the po and the other shippers are almost 45 min away i dont feel its worth my effort too package and drive too ship it. just for instance the po wanted $95 just too shipp the slider from here too upper ny and that was probally the lightest part there
as usually if somebody shows up out here in the outer realm I'll make'm a deal on some or all


ok guys see the last pick too see whats available from these parts there alot more thats not pic'd(mostly the small parts an peices) still missing doors an most of a front clip

pendin where u r in PA, i'll come pick up the bumper. shoot me a message or something

[midniteblues]

Originally Posted by 2772

pendin where u r in PA, i'll come pick up the bumper. shoot me a message or something

thanks but the bumper was payed for

[Redden05]

I would like to have the bed. I will pm you to set up a time. Thanks.
Posted via Mobile Device

[midniteblues]

guy's i'm adding more parts too my no shipping list. I can only ship through the po and they charge too much for shipping bigger peices. so these are local only.


14. very nice oe bbc 68-72 bbc fan shroud it has a small scratch on the top otherwise perfect .....$75

15. oe gmc stepside tailgate. its in ok shape. its got very very lil' surface rust only in the corners were the spot welds are popped.
the top rail has a very slight bow( from sitting on it when down) but the bottom is straight.
the center panel has just a few small dings....... I would love too trade this for a stepside chevy gate in same condition or i'll sell it $100

[midniteblues]

also would be intrested in tradeing
up some bumpers

i have two chrome stepside rear bumpers both are driver shape both have a few dings one has 2 extra holes(idkw) and a good plate bucket with nicer chrome.the other has a dent above the plate box and is pulled in around the bumper bolts.

i have two front painted 67-70 bumpers both have dings and some rust these need a good blasting an some straightening

i have one painted stepside rear bumper it has some rust but is very straight.


i'm looking for a nice painted rear step side bumper.