CA Front suspension parts, side saddle tanks, headers, an engine? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jake1971 · 04-14-2015, 07:08 PM

Quote:

Originally Posted by Jake1971

I will offer $75 for the middle seat belt plus shipping if you change your mind.

Quote:

Originally Posted by Sheetaki

Ok, I'll take you up on that. You seem to really want it, and my truck is very far from a restoration. Do you want all the belts or just the middle? What's your shipping zip?

I will take the middle blue seat belt set, I need it to safely secure my grandchild when he or she arrives . LMK total including shipping to 78602. Is PayPal good for you?

burnitg · 04-14-2015, 07:55 PM

Quote:

Originally Posted by Sheetaki

Updated the OP, lowered some prices, tried to make it easier to read.

Burnitg: I called UPS and the tanks must be triple bagged with each bag sealed, and then they must be boxed. I'll have to dig around a bit to get a box to fit them. The shipping quote may change a bit as the dimensions will be larger. There's no hazmat fee or anything, they'll just go regular ground so I imagine it will only be $50 instead of $40 or something like that. I'll just charge you whatever I get charged.

I'm OK with $200-ish for the pair shipped. Let me know what the actual cost is.

Burnett

Jake1971 · 04-21-2015, 07:21 PM

Has anyone heard from the OP? He was online as recently as yesterday afternoon. My offer for the middle seat belt set stands.

Sheetaki · 04-21-2015, 07:43 PM

Quote:

Originally Posted by Jake1971

Has anyone heard from the OP? He was online as recently as yesterday afternoon. My offer for the middle seat belt set stands.

Sorry, I've been swamped working on my project. This weekend was in theory the deadline to get it out of where it's stored and the wiring harness still looks like the picture I've attached.

Looks like shipping is going to run $18. Call it $90 total. Paypal is fine, Deceptor101@gmail.com. I can ship it out tomorrow.

I haven't been able to search for boxes very hard for the tanks. I would very much like to get rid of them though, so Burnitg if you'll be patient with me, I'll continue working on it.

Jake1971 · 04-21-2015, 08:09 PM

Quote:

Originally Posted by Sheetaki

Sorry, I've been swamped working on my project. This weekend was in theory the deadline to get it out of where it's stored and the wiring harness still looks like the picture I've attached.

Looks like shipping is going to run $18. Call it $90 total. Paypal is fine, Deceptor101@gmail.com. I can ship it out tomorrow.

I haven't been able to search for boxes very hard for the tanks. I would very much like to get rid of them though, so Burnitg if you'll be patient with me, I'll continue working on it.

PayPal sent for the blue middle seat belt set; shipping info is attached to payment. Thanks!
PM sent also with shipping info.

Jake1971 · 04-23-2015, 07:05 PM

Quote:

Originally Posted by Jake1971

PayPal sent for the blue middle seat belt set; shipping info is attached to payment. Thanks!
PM sent also with shipping info.

Have you shipped yet?

Sheetaki · 04-24-2015, 11:39 AM

Quote:

Originally Posted by Jake1971

Have you shipped yet?

Yup, just PM'd you the tracking #.

Also updated the OP.

burnitg · 04-24-2015, 02:09 PM

I'm willing to wait. I would like to have them delivered before June 1 though. Is that practical?

Burnett

twistedchevy · 04-25-2015, 01:22 AM

Still have the engine?

Sheetaki · 04-25-2015, 02:20 AM

Quote:

Originally Posted by burnitg

I'm willing to wait. I would like to have them delivered before June 1 though. Is that practical?

Burnett

Yeah, I should definitely be able to manage that.
Twisted chevy the engine is sold, still have an HEI and carb though. HEI comes with plug wires.

gjmath01 · 04-25-2015, 02:37 AM

Im interested in the carb i have a 1 barrel on it now acting let me know shipping to 70124 thanks

Kenfuzed · 04-26-2015, 06:40 PM

PM sent the other day.

Sheetaki · 04-26-2015, 10:24 PM

Quote:

Originally Posted by gjmath01

Im interested in the carb i have a 1 barrel on it now acting let me know shipping to 70124 thanks

Let me get the weight when I get into work tomorrow and I can get you a shipping quote. Did you want the air cleaner and housing too?

Sheetaki · 04-27-2015, 08:18 PM

Headers shipped today, will update the OP tonight.
gjmath01- Shipping quote for just the carb to residential is $17. Interested?

Jake1971 · 04-30-2015, 06:55 PM

Quote:

Originally Posted by Jake1971

PayPal sent for the blue middle seat belt set; shipping info is attached to payment. Thanks!
PM sent also with shipping info.

Package arrived last night. Thanks again!

gjmath01 · 04-30-2015, 07:44 PM

Quote:

Originally Posted by Sheetaki

Headers shipped today, will update the OP tonight.
gjmath01- Shipping quote for just the carb to residential is $17. Interested?

Posted via Mobile Device

gjmath01 · 04-30-2015, 07:44 PM

Yes sir.ddoes it require a rebuild? Or is it ready to go?
Posted via Mobile Device

**1968k20** · 04-30-2015, 10:12 PM

Might be interested in HEI. How much to ship to 96020?

Sheetaki · 05-04-2015, 05:33 PM

Quote:

Originally Posted by gjmath01

Yes sir.ddoes it require a rebuild? Or is it ready to go?

I bought it rebuilt from Rockauto in August 2013, but it didn't get many miles on it before I parked the truck to start the real project. Probably no more than 500, it should be good to go.

Quote:

Originally Posted by 1968k20

Might be interested in HEI. How much to ship to 96020?

Looks like shipping should run around $18, although that's estimating box size.

burnitg · 06-23-2015, 11:53 AM

Quote:

Originally Posted by burnitg

I'm willing to wait. I would like to have them delivered before June 1 though. Is that practical?

Burnett

Sheetaki:

Where are we with the tanks? I am still interested.

Thanks,
Burnett

Sheetaki · 06-24-2015, 12:08 PM

Still struggling to find a way to box them up. You don't happen to have access to a commercial location with a forklift do you? LTL-ing a pallet would be super easy and only a bit more expensive, but that's if its a commercial address where they don't have to use a liftgate.

burnitg · 06-24-2015, 02:06 PM

Have you considered shipping via Fastenal? Several board members use them to ship large/bulky items. There are a couple of Fastenal stores convenient to me - one in Golden, the other in Boulder.

Sheetaki · 06-24-2015, 03:50 PM

I've got a Fastenal near me as well, but I've never used them before. I sent them a shipping request, so we'll see what they say.

Sheetaki · 06-25-2015, 01:10 PM

Welp
"Unfortunately, we cannot ship into the state of Colorado at this time. We are at our freight max capacity and cannot haul any outside freight. I am sorry to decline this request."
I can do LTL with my company, but it would be around $125 to a commercial address where they don't need to lift-gate it. Otherwise residential is usually $50, as is lift-gate service.

Sorry I jumped the gun on getting you a ups quote so early. I should have looked into what it would realistically take, rather than just assume bare minimum measurements. If you can find a commercial place who will unload with a forklift, I'll still do $200 total.

burnitg · 06-26-2015, 11:29 AM

I am willing to pay the extra $50 for residential delivery. By the time I drive down to Denver and pay someone to unload them, I will have spent the $50 and half a day of my time. Besides, I know the local LTL driver well...

04-21-2015, 07:21 PM	#28
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: Front suspension parts, side saddle tanks, headers, an engine? Has anyone heard from the OP? He was online as recently as yesterday afternoon. My offer for the middle seat belt set stands. __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

04-24-2015, 02:09 PM	#33
burnitg Registered User Join Date: Nov 2009 Location: Black Hawk, CO Posts: 215	Re: Front suspension parts, side saddle tanks, headers, an engine? I'm willing to wait. I would like to have them delivered before June 1 though. Is that practical? Burnett

04-25-2015, 01:22 AM	#34
twistedchevy Registered User Join Date: Jan 2015 Location: napa, ca Posts: 249	Re: Front suspension parts, side saddle tanks, headers, an engine? Still have the engine? __________________ Mine: 72 c20 Chevy suburban, 02 5.3 w/4l60e , factory ac and 50gal tank. 70 k10 Chevy burb, 04 5.3 w/4l60e np241, with dual 30gal saddle tanks and rear 30 gal tank Dads: 67 c10 step side(project) 72 c10 GMC burb 350/400, with 67 Chevy front clip(grocery getter) Ours: 67 c30 tow truck 70 c10 long bed 383stroker w/digital gauges(work truck)

04-25-2015, 02:37 AM	#36
gjmath01 Registered User Join Date: Jun 2014 Location: new orleans Posts: 9	Re: Front suspension parts, side saddle tanks, headers, an engine? Im interested in the carb i have a 1 barrel on it now acting let me know shipping to 70124 thanks

04-26-2015, 06:40 PM	#37
Kenfuzed Registered User Join Date: Jun 2014 Location: Glendora CA -> Tampa FL Posts: 587	Re: Front suspension parts, side saddle tanks, headers, an engine? PM sent the other day. __________________ 1966 C10 Short Fleetside 1988 Sportster, 2008 Street Glide Ken's 1966 C10 build "Red Ale" Follow on Instgram: @cv_performance https://instagram.com/cv_performance Harley Performance Parts: CV Performance (Harley related) Enjoying the ride!

04-27-2015, 08:18 PM	#39
Sheetaki Registered User Join Date: Dec 2013 Location: Oakland, CA Posts: 61	Re: Front suspension parts, side saddle tanks, headers, an engine? Headers shipped today, will update the OP tonight. gjmath01- Shipping quote for just the carb to residential is $17. Interested?

04-30-2015, 07:44 PM	#42
gjmath01 Registered User Join Date: Jun 2014 Location: new orleans Posts: 9	Re: Front suspension parts, side saddle tanks, headers, an engine? Yes sir.ddoes it require a rebuild? Or is it ready to go? Posted via Mobile Device

04-30-2015, 10:12 PM	#43
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: Front suspension parts, side saddle tanks, headers, an engine? Might be interested in HEI. How much to ship to 96020?

06-24-2015, 12:08 PM	#46
Sheetaki Registered User Join Date: Dec 2013 Location: Oakland, CA Posts: 61	Re: Front suspension parts, side saddle tanks, headers, an engine? Still struggling to find a way to box them up. You don't happen to have access to a commercial location with a forklift do you? LTL-ing a pallet would be super easy and only a bit more expensive, but that's if its a commercial address where they don't have to use a liftgate.

06-24-2015, 02:06 PM	#47
burnitg Registered User Join Date: Nov 2009 Location: Black Hawk, CO Posts: 215	Re: Front suspension parts, side saddle tanks, headers, an engine? Have you considered shipping via Fastenal? Several board members use them to ship large/bulky items. There are a couple of Fastenal stores convenient to me - one in Golden, the other in Boulder.

06-24-2015, 03:50 PM	#48
Sheetaki Registered User Join Date: Dec 2013 Location: Oakland, CA Posts: 61	Re: Front suspension parts, side saddle tanks, headers, an engine? I've got a Fastenal near me as well, but I've never used them before. I sent them a shipping request, so we'll see what they say.

06-25-2015, 01:10 PM	#49
Sheetaki Registered User Join Date: Dec 2013 Location: Oakland, CA Posts: 61	Re: Front suspension parts, side saddle tanks, headers, an engine? Welp "Unfortunately, we cannot ship into the state of Colorado at this time. We are at our freight max capacity and cannot haul any outside freight. I am sorry to decline this request." I can do LTL with my company, but it would be around $125 to a commercial address where they don't need to lift-gate it. Otherwise residential is usually $50, as is lift-gate service. Sorry I jumped the gun on getting you a ups quote so early. I should have looked into what it would realistically take, rather than just assume bare minimum measurements. If you can find a commercial place who will unload with a forklift, I'll still do $200 total.

06-26-2015, 11:29 AM	#50
burnitg Registered User Join Date: Nov 2009 Location: Black Hawk, CO Posts: 215	Re: Front suspension parts, side saddle tanks, headers, an engine? I am willing to pay the extra $50 for residential delivery. By the time I drive down to Denver and pay someone to unload them, I will have spent the $50 and half a day of my time. Besides, I know the local LTL driver well...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.