GA Suburban rear half part out/cuts

[Madkidd007]

A couple items have been updated

[Heliarcn]

Looking for all parts that bolt to the upper hatch. Bolts, hinges, covers, screws, chrome damper thing, and the latch catch thing next to the damper thing. Will you take $45 for all of it?

[Madkidd007]

Originally Posted by Heliarcn

Looking for all parts that bolt to the upper hatch. Bolts, hinges, covers, screws, chrome damper thing, and the latch catch thing next to the damper thing. Will you take $45 for all of it?

I can do that, should all fit in a medium flat rate so that’ll work. I’ll cut the skin away so I can spray the hinge bolts with wd40, worst case I’ll cut them loose and send it together. Paypal address is in my signature, I’m on nights this week so I should be able to get it out same or next day depending on when payment is sent.

[Heliarcn]

Originally Posted by Madkidd007

I can do that, should all fit in a medium flat rate so that’ll work. I’ll cut the skin away so I can spray the hinge bolts with wd40, worst case I’ll cut them loose and send it together. Paypal address is in my signature, I’m on nights this week so I should be able to get it out same or next day depending on when payment is sent.

Payment sent. Thanks, Bret

[Madkidd007]

Got it. Weather permitting I should be able to get it done tomorrow afternoon.

[Madkidd007]

Originally Posted by Heliarcn

Payment sent. Thanks, Bret

It’ll go out tomorrow. Post office was buried and I have to work tonight. All bolts came out clean, a couple will need to soak longer but did break loose no problem so I cut the sheet metal off so you can soak them some more

[Madkidd007]

Little update, have time now to separate things and ship bigger items if you can give me a few days

[DaHos]

PM sent, Need the inner housing that holds the rear backup housing

[Madkidd007]

This is all that is left of the reverse inner housings. Driver side is still in tact but the passenger side all that’s left is the actual light housing itself.

[Madkidd007]

Taking offers, reasonable offers that is

[Madkidd007]

Trim pics after a light Brillo pad

[Madkidd007]

Unfortunately I didn’t take this one off before cutting the body so it’s a little shorter than it’s supposed to be.

[Madkidd007]

Bump to offered.

[Madkidd007]

Can separate and ship by size and weight now.

[khoult]

I'm looking for two side/park light cutouts.

[Madkidd007]

Originally Posted by khoult

I'm looking for two side/park light cutouts.

I took two screenshots from posts 15 & 16. If you need both sides ill do my quotes $20 each for the cuts, I’ll ship them free if you don’t mind them being 11.5”x11.5” cuts. So it would be $40 shipped for the pair

[khoult]

Payment sent

[Madkidd007]

Originally Posted by khoult

Payment sent

Got it, This is you. Not exactly 11.5x11.5 but plenty for what you’ll be doing.

[Madkidd007]

Still have a lot of the pieces

[waylonbud]

Hello, interested in the entire tailgate. Its a bit of a drive for me from here, but Im trying to swing a 1 ton deal for the ride home and wouldnt be too bad then. Ill keep you posted how it works out or if it will at all.

[Madkidd007]

Originally Posted by waylonbud

Hello, interested in the entire tailgate. Its a bit of a drive for me from here, but Im trying to swing a 1 ton deal for the ride home and wouldnt be too bad then. Ill keep you posted how it works out or if it will at all.

Aight then

[waylonbud]

Ok, sorry on the wait. Other plan didnt work out. Im planning on going to the squarebody show in Dawsonville Aug 10. Would like to meet up with you that morning then go to the show. Ill pm my number and you can call or message if that will work for you.

[Madkidd007]

Gate picked up by Waylon and some shooting the **** for free.

[waylonbud]

Yes sir, thanks. I was going to mention that here and bring this back to the top. Good talking with you and good luck on the crew-wagon, nice combo of parts on your build.

[Madkidd007]

Not much left but if you need something I’ll slash prices to move it