67 GMC super custom build - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chewychevy67 · 02-21-2018, 02:27 PM

I have no idea what year but it was later 50's early 60's I would think. It was picked clean except the cab. It was a big 1 ton style. The guy at the desk told me it was an international.

chewychevy67 · 03-10-2018, 12:04 AM

Here is what the fog lights would look like if I choose to add them. I also ordered new glass lenses for them. They look nice.

chewychevy67 · 03-12-2018, 05:46 PM

I made a change on the column levers. I moved the cruise control button to the end of the tilt lever. I tried to move it to the signal but not sure if that's possable. I did this so I can use the spot on the gear selection lever to turn on and off the gear vendors Overdrive unit I'm going to purchase for this truck.

chewychevy67 · 03-22-2018, 11:10 AM

Purchased some original repo spring ring battery cables for the truck. Also found these Nos cable covers for them. Never seen these covers before. I also bought a new battery that appears like the original. Not much else is going to happen on the truck for a while. Time for a break.

chewychevy67 · 04-12-2018, 11:31 PM

Here are the 2 switches I'm using on the right side of my cluster. The bottom one is a pull switch for my fog lights and the top is a 2 pole left right switch that will turn my gear vendors from automatically shifting to manual gear splitting . When turned to manual you will use the button on the shift lever to go in and out of the gears. I an having the placards for the fog and o/d made on a cnc machine and adding them to my choke delete cluster so they will look like the wipers and lights on the left side.

chewychevy67 · 04-15-2018, 02:31 PM

I really wanted power door locks to work like they should and I fought with this for a long time. This week I decided I wanted a different style door catch. I got these out of a 66 gm 2 door car. They work nice. They have the optional vacuum operated power door locks which I will add to my truck as well. I will like this much better that my locks won't pop up every time I close my door. Switches match the window style too!

chewychevy67 · 04-15-2018, 04:29 PM

I added the light at the bottom of the door as well. Needs More work but it will work just as intended and add as more water drainage. This light will light up the lock cylinder as well.

chewychevy67 · 04-23-2018, 09:20 PM

I got some decals back today I had a local shop make for me. I had a GM decal made for the front of the thermometer face. Now I have GMC and GM to choose from. I also had one made for my 67 th400 transmission ID tag.

**DeadheadNM** · 04-23-2018, 10:18 PM

Great updates!

chewychevy67 · 05-18-2018, 05:39 PM

Transmission is all rebuilt and ready to go. Not sure if I am going to paint it or just leave it as is. I will paint all the metal parts and the pan black and put all the plated bolts on it. The more I read about people having vibrations with shorter drive shafts I am not 100% sure I'm going to go gear vendors.

chewychevy67 · 05-20-2018, 11:10 PM

Getting the 400 all cleaned up tonight! I'm just going to leave it natural finish.

chewychevy67 · 05-31-2018, 11:47 AM

Not my 67 but I thought I'd share my latest acquisition. 2001 chevy 2500hd 8.1l and Allison transmission loaded. I drove this home 700 kilometers and I absolutely love it. Can't wait to tow with it!

chewychevy67 · 06-09-2018, 09:08 PM

Test fit my wood bed today. Turned out great. Won't tighten it down till its all done.

**68bowtie** · 06-10-2018, 12:31 AM

Looks amazing!

chewychevy67 · 06-22-2018, 05:19 PM

Had some work done to my firewall. This time it won't be full of body filler. I had the the area around the dimmer switch recesses further down so the auto dimming headlight harness can sit low under the rug and I had an area recessed for the radio foot controller and its harness so it looks like it was there stock. I also had a harness connector added above the speedometer hole to make clean work of Connecting the added accessories I am using. Last one is my thermometer with the gm decal on it.

chewychevy67 · 06-26-2018, 07:56 PM

Got these 2 pieces today from a 57 cadillac. Going to see how I can get the fog light circles into the truck bumper.

**Already Gone** · 06-26-2018, 08:33 PM

Quote:

Originally Posted by chewychevy67

Got these 2 pieces today from a 57 cadillac. Going to see how I can get the fog light circles into the truck bumper.

You aren't going to run 4 Fog Lites are you?

chewychevy67 · 06-26-2018, 09:37 PM

No. Only one on each side. 57 cadillac had 2 fog lights and 2 signal lights. I am only using the fog.

chewychevy67 · 08-12-2018, 11:03 AM

I had these parts removed from a 1967 Buick 400 transmission and I am going to add the. To my th400. These are the pieces required to allow your th400 to change the stall speed of your converter with 12 volts. Gm used this in 65 to 67 Buick old and cadillac 400 transmissions and can be adapted to chevy 400s with 8 bolt cases. It's pretty neat. I got my gear vendor unit as well so I can finish the transmission now.

*YoungPup1977* · 09-11-2018, 08:20 AM

Quote:

Originally Posted by chewychevy67

I had these parts removed from a 1967 Buick 400 transmission and I am going to add the. To my th400. These are the pieces required to allow your th400 to change the stall speed of your converter with 12 volts. Gm used this in 65 to 67 Buick old and cadillac 400 transmissions and can be adapted to chevy 400s with 8 bolt cases. It's pretty neat. I got my gear vendor unit as well so I can finish the transmission now.

Are the variable pitch parts for the TH400 available for sale ?

chewychevy67 · 08-12-2018, 04:18 PM

And the gear vendors

chewychevy67 · 08-21-2018, 05:42 PM

I got member tbone1964 to calibrate my 4k cable driven tach into a 5k tach and added a tach drive distributer to my engine. Wow did tbone1964 do an amazing job. SUPER HAPPY. With the ti ignition from the 60s I wanted my tach to be somewhat accurate and I don't believe that ti ever used an electric tach on Camaros it came in.

**Canuckvetter** · 08-21-2018, 10:17 PM

That looks so cool!!!! Old school period correct.

**68bowtie** · 08-22-2018, 12:01 AM

Quote:

Originally Posted by chewychevy67

I got member tbone to calibrate my 4k cable driven tach into a 5k tach and added a tach drive distributer to my engine. Wow did tbone do an amazing job. SUPER HAPPY. With the ti ignition from the 60s I wanted my tach to be somewhat accurate and I don't believe that ti ever used an electric tach on Camaros it came in.

sweet!!

chewychevy67 · 08-30-2018, 11:52 PM

I have been playing around with swaping my Vacuum gauge for a transmission oil temperature gauge. I got this oil temp gauge from a 1980 corvette and I took an extra gauge face I had and painted how I would like it to look. With the switch pitch converter I've been told the transmission will make more heat. Nothing to be worried about but I would rather this gauge than a vacuum gauge I think. Would be more beneficial if I ever tow. I would put the words "TRANS" on the lens.

02-21-2018, 02:27 PM	#1
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build I have no idea what year but it was later 50's early 60's I would think. It was picked clean except the cab. It was a big 1 ton style. The guy at the desk told me it was an international.

03-10-2018, 12:04 AM	#2
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build Here is what the fog lights would look like if I choose to add them. I also ordered new glass lenses for them. They look nice. Attached Images

03-12-2018, 05:46 PM	#3
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build I made a change on the column levers. I moved the cruise control button to the end of the tilt lever. I tried to move it to the signal but not sure if that's possable. I did this so I can use the spot on the gear selection lever to turn on and off the gear vendors Overdrive unit I'm going to purchase for this truck. Attached Images

03-22-2018, 11:10 AM	#4
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build Purchased some original repo spring ring battery cables for the truck. Also found these Nos cable covers for them. Never seen these covers before. I also bought a new battery that appears like the original. Not much else is going to happen on the truck for a while. Time for a break. Attached Images Last edited by chewychevy67; 03-22-2018 at 12:13 PM.

04-12-2018, 11:31 PM	#5
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build Here are the 2 switches I'm using on the right side of my cluster. The bottom one is a pull switch for my fog lights and the top is a 2 pole left right switch that will turn my gear vendors from automatically shifting to manual gear splitting . When turned to manual you will use the button on the shift lever to go in and out of the gears. I an having the placards for the fog and o/d made on a cnc machine and adding them to my choke delete cluster so they will look like the wipers and lights on the left side. Attached Images

04-15-2018, 02:31 PM	#6
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build I really wanted power door locks to work like they should and I fought with this for a long time. This week I decided I wanted a different style door catch. I got these out of a 66 gm 2 door car. They work nice. They have the optional vacuum operated power door locks which I will add to my truck as well. I will like this much better that my locks won't pop up every time I close my door. Switches match the window style too! Attached Images

04-15-2018, 04:29 PM	#7
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build I added the light at the bottom of the door as well. Needs More work but it will work just as intended and add as more water drainage. This light will light up the lock cylinder as well. Attached Images Last edited by chewychevy67; 04-16-2018 at 12:03 AM.

04-23-2018, 09:20 PM	#8
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build I got some decals back today I had a local shop make for me. I had a GM decal made for the front of the thermometer face. Now I have GMC and GM to choose from. I also had one made for my 67 th400 transmission ID tag. Attached Images Last edited by chewychevy67; 04-27-2018 at 09:30 PM.

04-23-2018, 10:18 PM	#9
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,346	Re: 67 GMC super custom build Great updates! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-18-2018, 05:39 PM	#10
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build Transmission is all rebuilt and ready to go. Not sure if I am going to paint it or just leave it as is. I will paint all the metal parts and the pan black and put all the plated bolts on it. The more I read about people having vibrations with shorter drive shafts I am not 100% sure I'm going to go gear vendors. Attached Images Last edited by chewychevy67; 05-18-2018 at 06:07 PM.

05-20-2018, 11:10 PM	#11
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build Getting the 400 all cleaned up tonight! I'm just going to leave it natural finish. Attached Images Last edited by chewychevy67; 05-21-2018 at 04:57 PM.

05-31-2018, 11:47 AM	#12
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build Not my 67 but I thought I'd share my latest acquisition. 2001 chevy 2500hd 8.1l and Allison transmission loaded. I drove this home 700 kilometers and I absolutely love it. Can't wait to tow with it! Attached Images

06-09-2018, 09:08 PM	#13
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build Test fit my wood bed today. Turned out great. Won't tighten it down till its all done. Attached Images Last edited by chewychevy67; 06-09-2018 at 09:52 PM.

06-10-2018, 12:31 AM	#14
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,552	Re: 67 GMC super custom build Looks amazing! __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Survivor "Lil’ Mint" (67 c10 40k mile light green original paint) Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

06-22-2018, 05:19 PM	#15
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build Had some work done to my firewall. This time it won't be full of body filler. I had the the area around the dimmer switch recesses further down so the auto dimming headlight harness can sit low under the rug and I had an area recessed for the radio foot controller and its harness so it looks like it was there stock. I also had a harness connector added above the speedometer hole to make clean work of Connecting the added accessories I am using. Last one is my thermometer with the gm decal on it. Attached Images Last edited by chewychevy67; 06-25-2018 at 10:47 PM.



Register or Log In To remove these advertisements.

06-26-2018, 07:56 PM	#16
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build Got these 2 pieces today from a 57 cadillac. Going to see how I can get the fog light circles into the truck bumper. Attached Images

06-26-2018, 09:37 PM	#18
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build No. Only one on each side. 57 cadillac had 2 fog lights and 2 signal lights. I am only using the fog.

08-12-2018, 11:03 AM	#19
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build I had these parts removed from a 1967 Buick 400 transmission and I am going to add the. To my th400. These are the pieces required to allow your th400 to change the stall speed of your converter with 12 volts. Gm used this in 65 to 67 Buick old and cadillac 400 transmissions and can be adapted to chevy 400s with 8 bolt cases. It's pretty neat. I got my gear vendor unit as well so I can finish the transmission now. Attached Images

08-12-2018, 04:18 PM	#21
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build And the gear vendors Attached Images

08-21-2018, 05:42 PM	#22
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build I got member tbone1964 to calibrate my 4k cable driven tach into a 5k tach and added a tach drive distributer to my engine. Wow did tbone1964 do an amazing job. SUPER HAPPY. With the ti ignition from the 60s I wanted my tach to be somewhat accurate and I don't believe that ti ever used an electric tach on Camaros it came in. Attached Images Last edited by chewychevy67; 08-24-2018 at 01:23 PM.

08-21-2018, 10:17 PM	#23
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,045	Re: 67 GMC super custom build That looks so cool!!!! Old school period correct. __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

08-30-2018, 11:52 PM	#25
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: 67 GMC super custom build I have been playing around with swaping my Vacuum gauge for a transmission oil temperature gauge. I got this oil temp gauge from a 1980 corvette and I took an extra gauge face I had and painted how I would like it to look. With the switch pitch converter I've been told the transmission will make more heat. Nothing to be worried about but I would rather this gauge than a vacuum gauge I think. Would be more beneficial if I ever tow. I would put the words "TRANS" on the lens. Attached Images Last edited by chewychevy67; 08-31-2018 at 12:08 AM.

Register or Log In To remove these advertisements.