project 62 - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scotts62 · 12-08-2009, 01:07 AM

Na its not junk, Thats cool bring it on

jgh64pkup · 12-08-2009, 01:09 AM

well if i can get a winshield ill put everything on it get it inspected and drive it up there
sorry for making ur build a chat room

scotts62 · 12-08-2009, 08:51 AM

That would be cool if you can make it it was a good time last year. No prob on the chat room

JohnC · 12-08-2009, 10:31 AM

There is only a few people here that don't like their threads turned into chat rooms. Most of us are cool with it. That's the best part for me is bsing with all you guys!

*highperf4x4* · 12-08-2009, 02:19 PM

Quote:

Originally Posted by JohnC

There is only a few people here that don't like their threads turned into chat rooms. Most of us are cool with it. That's the best part for me is bsing with all you guys!

I guess so since it takes you 6 months to get a freakin motor installed.................

I'm just sayin................

scotts62 · 12-08-2009, 03:10 PM

Quote:

Originally Posted by JohnC

There is only a few people here that don't like their threads turned into chat rooms. Most of us are cool with it. That's the best part for me is bsing with all you guys!

ill keep that one on the low

Quote:

Originally Posted by highperf4x4

I guess so since it takes you 6 months to get a freakin motor installed.................

I'm just sayin................

oh its getting down right mean now

MacAttack · 12-08-2009, 03:56 PM

Quote:

Originally Posted by highperf4x4

I guess so since it takes you 6 months to get a freakin motor installed.................

I'm just sayin................

Six months? Man, you're quick!

Took me two months just to fire mine off!

Mac.

Dustin07 · 12-08-2009, 04:24 PM

eh, 6 months isn't that bad to install the motor. I bought my '64 last december and parked it at my folks house. i'm going to actually get it in my garage this week, i think, and begin disassembly, LOL

JohnC · 12-08-2009, 05:04 PM

Ha ha see Travis I'm not alone!

scotts62 · 12-08-2009, 07:06 PM

*highperf4x4* · 12-09-2009, 01:01 AM

Well I can't stand to stay out of mine. If I had to pull the engine out of it I would be like a crack addict until I got it back in!!!!!!!!!!!!

tthornt · 12-15-2009, 08:26 PM

If u don't mine sharing your info on the measurements, materials, and how regarding the center console. i would certainly be gratefull.
THX

Inverter · 12-15-2009, 08:53 PM

Quote:

Originally Posted by scotts62

Teaser pic

Hey Scott,
TTT. Just saw this,looks sexy. Are you sittin on the front crossmember in this pic?

scotts62 · 12-16-2009, 12:04 AM

Thanks Troy!

Yeah fronts in the dirt, back would still roll though.

Inverter · 12-16-2009, 01:22 AM

Those are some big sidewalls,maybe bigger than mine.I think I might have to go down a series in the front.Mine barely untuck before the shock binds.
Theres not manny options for the newer trucks....
Anyway,lookin good.

scotts62 · 12-16-2009, 08:44 AM

Yeah heard the newer ones are harder to get to lay out but im not sure. The front end makes mine easy to get to lay flat though, i dont have to worry about fenders getting in the way.

Inverter · 12-16-2009, 01:06 PM

The newer trucks actually lay better because the bottom of the front crossmember is flush w/the bottom of the main rails. The problem,if you consider it one,is the front track width.I jus want to be able to drive around w/o having to raise the truck everytime I need to make a 90 deg. turn.
How much sidewall to fender clearance do you have at ride height?

scotts62 · 12-16-2009, 07:42 PM

Quote:

Originally Posted by Inverter

The newer trucks actually lay better because the bottom of the front crossmember is flush w/the bottom of the main rails. The problem,if you consider it one,is the front track width.I jus want to be able to drive around w/o having to raise the truck everytime I need to make a 90 deg. turn.
How much sidewall to fender clearance do you have at ride height?

Man i dont know exact but it would safe to say 2in or so. It would probably be able to cruise around laid out pretty good and steer somewhat ok.

1Bad62Pro/Street · 12-17-2009, 08:05 PM

Scott.......
When ya going to put some Wide Hides on the back?

She's hunkered down low enough....

scotts62 · 12-17-2009, 10:41 PM

Not on this truck man

ruffrida2005 · 12-17-2009, 11:06 PM

Those tires are really 9" Scott, he just has small hands. You know what they say about a man with small hands.

He eats with a small fork! haha

1Bad62Pro/Street · 12-18-2009, 04:38 PM

Quote:

Originally Posted by ruffrida2005

Those tires are really 9" Scott, he just has small hands. You know what they say about a man with small hands.

He eats with a small fork! haha

Quote:

Originally Posted by highperf4x4

Makes his tires look big? I don't know, I'm just guessing here.

Quote:

Originally Posted by scotts62

Goshhhhhhhhhhhhh!!!!!

YouTube- Napoleon Dynamite Lockers

scotts62 · 12-18-2009, 05:28 PM

Damn i thought i got rid of all my high school videos!!!!

*highperf4x4* · 12-18-2009, 09:46 PM

that is funny

Just for the record, my hands are bigger than Evander Holifields. I checked them on the wall of hands in Las Vegas. I have a pic of it somewhere.

scotts62 · 12-18-2009, 10:53 PM

12-08-2009, 01:07 AM	#576
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Na its not junk, Thats cool bring it on __________________ Scott 93 crew cab build Project 62

12-08-2009, 01:09 AM	#577
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: project 62 well if i can get a winshield ill put everything on it get it inspected and drive it up there sorry for making ur build a chat room __________________ Gage 1967 C10 Shortbed Stepside

12-08-2009, 08:51 AM	#578
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 That would be cool if you can make it it was a good time last year. No prob on the chat room __________________ Scott 93 crew cab build Project 62

12-08-2009, 10:31 AM	#579
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: project 62 There is only a few people here that don't like their threads turned into chat rooms. Most of us are cool with it. That's the best part for me is bsing with all you guys!

12-08-2009, 04:24 PM	#583
Dustin07 Stirrer of the Pot Join Date: Mar 2008 Location: washington Posts: 477	Re: project 62 eh, 6 months isn't that bad to install the motor. I bought my '64 last december and parked it at my folks house. i'm going to actually get it in my garage this week, i think, and begin disassembly, LOL

12-08-2009, 05:04 PM	#584
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: project 62 Ha ha see Travis I'm not alone!

12-08-2009, 07:06 PM	#585
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 __________________ Scott 93 crew cab build Project 62

12-09-2009, 01:01 AM	#586
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: project 62 Well I can't stand to stay out of mine. If I had to pull the engine out of it I would be like a crack addict until I got it back in!!!!!!!!!!!!

12-15-2009, 08:26 PM	#587
tthornt Registered User Join Date: May 2008 Location: greenville Alabama Posts: 63	Re: project 62 If u don't mine sharing your info on the measurements, materials, and how regarding the center console. i would certainly be gratefull. THX __________________ Country; LIKE A ROCK All that I am, I owe 62SWB-STEP 83SWB 86LWB

12-16-2009, 12:04 AM	#589
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Thanks Troy! Yeah fronts in the dirt, back would still roll though. __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 12-16-2009 at 12:05 AM.

12-16-2009, 01:22 AM	#590
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: project 62 Those are some big sidewalls,maybe bigger than mine.I think I might have to go down a series in the front.Mine barely untuck before the shock binds. Theres not manny options for the newer trucks.... Anyway,lookin good. __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484

12-16-2009, 08:44 AM	#591
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Yeah heard the newer ones are harder to get to lay out but im not sure. The front end makes mine easy to get to lay flat though, i dont have to worry about fenders getting in the way. __________________ Scott 93 crew cab build Project 62

12-16-2009, 01:06 PM	#592
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: project 62 The newer trucks actually lay better because the bottom of the front crossmember is flush w/the bottom of the main rails. The problem,if you consider it one,is the front track width.I jus want to be able to drive around w/o having to raise the truck everytime I need to make a 90 deg. turn. How much sidewall to fender clearance do you have at ride height? __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484

12-17-2009, 08:05 PM	#594
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: project 62 Scott....... When ya going to put some Wide Hides on the back? She's hunkered down low enough.... __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

12-17-2009, 10:41 PM	#595
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Not on this truck man __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

12-17-2009, 11:06 PM	#596
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: project 62 Those tires are really 9" Scott, he just has small hands. You know what they say about a man with small hands. He eats with a small fork! haha __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

12-18-2009, 05:28 PM	#598
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Damn i thought i got rid of all my high school videos!!!! __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 12-18-2009 at 05:28 PM.

12-18-2009, 09:46 PM	#599
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: project 62 that is funny Just for the record, my hands are bigger than Evander Holifields. I checked them on the wall of hands in Las Vegas. I have a pic of it somewhere. Last edited by highperf4x4; 12-18-2009 at 09:48 PM.

12-18-2009, 10:53 PM	#600
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 __________________ Scott 93 crew cab build Project 62

Register or Log In To remove these advertisements.