Project : JACK LALANNE - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cw72gmc · 11-11-2009, 12:37 PM

Quote:

Originally Posted by mjensen

What's up with the Jeep?

its just the reason and set back of having the rest of my truck painted. Money and time consumption ya know?

It was my moms one owner spotless 96 cherokee, only had 80,000 miles on it.

We were sitting in the left hand turn lane on bangerter, which would put us turning onto 5400s westbound. We were at a red turn arrow,with straight traffic flowing....someone dozed off or was dui, to be determined...was doing 65 through the intersection and for some reason thought he'd do it through the turn lane... I was sitting a car length ahead in my gmc.

The Jeep Took All The Damage...However They Said My Gmc Stopped her from being thrown into oncoming traffic...

So Not only do I love my gmc because of what it is...but because it stopped a bad wreck from being even worse.

I have since replaced my bumper as you guys see in the picture of it in wal mart parking lot.

Not a scratch on my truck

mjensen · 11-11-2009, 01:36 PM

Wow, that is lucky & unlucky all at the same time. Glad to hear everyone is okay.

NTR72GMC · 11-11-2009, 06:27 PM

That sucks hope everything works out.

19723DR · 11-11-2009, 08:47 PM

Quote:

Originally Posted by Cw72gmc

Thank you very much, I will Enjoy every minute of it!

What do you have left laying around?

I have a lot of small stuff. GMC emblems; to be more specific a hood and fender emblem. And lots of other small stuff. If you need something, give me a PM and I'll be happy to help.

Sorry to hear about your accident, that sucks.

Cw72gmc · 11-12-2009, 05:07 PM

I thank all of you for your support and help with parts. I'm gonna pull the truck out this weekend and do some work I'll post pics soon

Cw72gmc · 11-12-2009, 05:10 PM

Quote:

Originally Posted by 19723DR

I have a lot of small stuff. GMC emblems; to be more specific a hood and fender emblem. And lots of other small stuff. If you need something, give me a PM and I'll be happy to help.

Sorry to hear about your accident, that sucks.

I dont have fender emblems, Are they the V8 ones? I have a set of the gmc 1500 v6 ones but think that would look tacky on a 3/4 Ton v8 Truck.

Other small things I really can think of are... Dash Pad, Maybe some fitted floor mats,

OH and I need a set of door mirrors I have the small ones. I cant find replacements anywhere...a jealous x broke my drivers side mirror glass recently

And I'm looking for a nice rear chrome bumper, step or non..

Cw72gmc · 11-12-2009, 05:15 PM

Ok, So I'm Hinting around to my step dad about this gauge cluster...maybe for x mas?

We can DREAM right?

my67chevytruck · 11-12-2009, 05:50 PM

great attitude... nice progress on the truck! keep at it!

Cw72gmc · 11-12-2009, 05:56 PM

Quote:

Originally Posted by my67chevytruck

great attitude... nice progress on the truck! keep at it!

Thanks, Everyone here helps me keep at it. Everyone is so welcoming and encouraging. If only everyone in the world was a chev/gmc pickup owner! lol

Cw72gmc · 11-13-2009, 12:24 AM

Ok, Well the truck hasnt been out lately. And Tonight When It was it was raining...So the pictures turned out kinda blurred.

Any- Who Here are some up to the minute pictures!

If anyone thinks I'm posting to many just say something..

mjensen · 11-13-2009, 12:29 AM

Is there really such a thing as too many?

Cw72gmc · 11-13-2009, 12:36 AM

Quote:

Originally Posted by mjensen

Is there really such a thing as too many?

Well When You Put It That Way, NO hahhah ! This weathers turning nasty eh?

mjensen · 11-13-2009, 12:46 AM

Yeah, it's turning nasty, but I love driving when it's slick out. There's nothing like seeing a 1-ton 4 door sideways down the road

disclaimer: Of course nobody else is within miles and I always wear my helmet and seatbelt!

Cw72gmc · 11-13-2009, 01:05 AM

Quote:

Originally Posted by mjensen

Yeah, it's turning nasty, but I love driving when it's slick out. There's nothing like seeing a 1-ton 4 door sideways down the road

disclaimer: Of course nobody else is within miles and I always wear my helmet and seatbelt!

haha at the top of my road there is a stop sign when you reach 5400s. Its doesn't seem steep...until your in a c/k series when its a blizzard one night just before christmas I'm stopped waiting to turn and just drifted sideways into the persons front yard...funny thing is my dad always told me his old pickup did the same thing

Cw72gmc · 11-13-2009, 01:08 AM

I'm also known for tearing up kearns high parking lot and drivers ed range when there is fresh powder

Cw72gmc · 11-13-2009, 08:52 PM

Thanks all

Be safe

Cw72gmc · 11-13-2009, 08:55 PM

Here it was this morning

So on my clutch issue....when it makes the howling noise clutch half way out if I give it throttle it stops, and if the truck is rolling and the clutch is half way out no howling...could a weak pressure plate cause howling? Maybe its just slipping and when I give it gas it has enough friction to grab? Is there any fluids I should check?

NTR72GMC · 11-17-2009, 02:58 PM

It should just have linkage for your clutch (no fluids). Your clutch might of gotten a little hot if it doesn't go away it probably will need replacing. As far as your honda goes you might want to be careful posting it for sale on here. The site rules want you to be a site supporter to post things for sale or want to buy posts, its $25 a year to become a site supporter and well worth it in my opinion just a heads up. Any ways good luck selling your honda. BTW send me a pm I might have a mirror you can have.

Cw72gmc · 11-18-2009, 03:14 AM

Quote:

Originally Posted by NTR72GMC

It should just have linkage for your clutch (no fluids). Your clutch might of gotten a little hot if it doesn't go away it probably will need replacing. As far as your honda goes you might want to be careful posting it for sale on here. The site rules want you to be a site supporter to post things for sale or want to buy posts, its $25 a year to become a site supporter and well worth it in my opinion just a heads up. Any ways good luck selling your honda. BTW send me a pm I might have a mirror you can have.

Thats what I thought, I knew it was non-hydraulic. It seems to be getting better as I drive it.

Thanks for the heads up about the add its gone now. I'll pm you asap, just getting ready to call it a night, have a good one man

**rob32472** · 11-18-2009, 07:16 AM

who sells that gauge custer?

Cw72gmc · 11-18-2009, 03:24 PM

Boese Engineering Logo
Boese Engineering
2121 S. Priest Dr, Suite 113Toll Free:
Local Phone :
Email:

877-263-7377
480-968-2550
Tempe, AZ. 85282

Cw72gmc · 11-29-2009, 05:39 PM

Ok Guys, I havent been feeling well because of my diabetes...today. If you saw my fuel pump thread you know mine went out.

Well my moms new focus had an alternator and starter go out simultaniously.

In wal mart parking lot, the worst part is someone stole money out of her purse while she was shopping.

I couldnt let my mom down so I went and sold my I touch, and changed both out in the parking lot...

....so now my adrenaline is going and I'm deciding to be a man, work through the pain and get my truck done

Also picked up a new tach... will post pictures this evening of the truck done...

Just thought I'd update you all!

NTR72GMC · 11-30-2009, 05:14 PM

That sucks about about your moms car. Hope you get feeling better.

Cw72gmc · 12-02-2009, 03:02 AM

Quote:

Originally Posted by NTR72GMC

That sucks about about your moms car. Hope you get feeling better.

Thank you , I'm feeling better now

Cw72gmc · 12-02-2009, 03:08 AM

Ok Guys, So I'm Officially Twenty One Years Old Now, Finally got my fuel pump done, I also got a new pair of front shocks, just for fun.

Oh and to my utah neighbors.... I have a hood, and four 1/4 ton five lug rims with good mis matched tires...up for dibs*FREE*...need to get them out of my garage , I'm getting a new door.

Hope all is well

11-11-2009, 01:36 PM	#52
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Project : JACK LALANNE Wow, that is lucky & unlucky all at the same time. Glad to hear everyone is okay. __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

11-11-2009, 06:27 PM	#53
NTR72GMC 2wd FTW!!!! Join Date: Jan 2007 Location: SLC UTAH Posts: 673	Re: Project : JACK LALANNE That sucks hope everything works out.

11-12-2009, 05:07 PM	#55
Cw72gmc ~Craig~ Join Date: Mar 2009 Location: Kearns Utah Posts: 169	Re: Project : JACK LALANNE I thank all of you for your support and help with parts. I'm gonna pull the truck out this weekend and do some work I'll post pics soon

11-12-2009, 05:15 PM	#57
Cw72gmc ~Craig~ Join Date: Mar 2009 Location: Kearns Utah Posts: 169	Re: Project : JACK LALANNE Ok, So I'm Hinting around to my step dad about this gauge cluster...maybe for x mas? We can DREAM right?

11-12-2009, 05:50 PM	#58
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project : JACK LALANNE great attitude... nice progress on the truck! keep at it! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

11-13-2009, 12:24 AM	#60
Cw72gmc ~Craig~ Join Date: Mar 2009 Location: Kearns Utah Posts: 169	Re: Project : JACK LALANNE Ok, Well the truck hasnt been out lately. And Tonight When It was it was raining...So the pictures turned out kinda blurred. Any- Who Here are some up to the minute pictures! If anyone thinks I'm posting to many just say something..

11-13-2009, 12:29 AM	#61
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Project : JACK LALANNE Is there really such a thing as too many? __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

11-13-2009, 12:46 AM	#63
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Project : JACK LALANNE Yeah, it's turning nasty, but I love driving when it's slick out. There's nothing like seeing a 1-ton 4 door sideways down the road disclaimer: Of course nobody else is within miles and I always wear my helmet and seatbelt! __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

11-13-2009, 01:08 AM	#65
Cw72gmc ~Craig~ Join Date: Mar 2009 Location: Kearns Utah Posts: 169	Re: Project : JACK LALANNE I'm also known for tearing up kearns high parking lot and drivers ed range when there is fresh powder

11-13-2009, 08:52 PM	#66
Cw72gmc ~Craig~ Join Date: Mar 2009 Location: Kearns Utah Posts: 169	Re: Project : JACK LALANNE Thanks all Be safe Last edited by Cw72gmc; 11-18-2009 at 03:13 AM.

11-13-2009, 08:55 PM	#67
Cw72gmc ~Craig~ Join Date: Mar 2009 Location: Kearns Utah Posts: 169	Re: Project : JACK LALANNE Here it was this morning So on my clutch issue....when it makes the howling noise clutch half way out if I give it throttle it stops, and if the truck is rolling and the clutch is half way out no howling...could a weak pressure plate cause howling? Maybe its just slipping and when I give it gas it has enough friction to grab? Is there any fluids I should check?

11-17-2009, 02:58 PM	#68
NTR72GMC 2wd FTW!!!! Join Date: Jan 2007 Location: SLC UTAH Posts: 673	Re: Project : JACK LALANNE It should just have linkage for your clutch (no fluids). Your clutch might of gotten a little hot if it doesn't go away it probably will need replacing. As far as your honda goes you might want to be careful posting it for sale on here. The site rules want you to be a site supporter to post things for sale or want to buy posts, its $25 a year to become a site supporter and well worth it in my opinion just a heads up. Any ways good luck selling your honda. BTW send me a pm I might have a mirror you can have.

11-18-2009, 07:16 AM	#70
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,504	Re: Project : JACK LALANNE who sells that gauge custer?

11-18-2009, 03:24 PM	#71
Cw72gmc ~Craig~ Join Date: Mar 2009 Location: Kearns Utah Posts: 169	Re: Project : JACK LALANNE Boese Engineering Logo Boese Engineering 2121 S. Priest Dr, Suite 113Toll Free: Local Phone : Email: 877-263-7377 480-968-2550 Tempe, AZ. 85282

11-29-2009, 05:39 PM	#72
Cw72gmc ~Craig~ Join Date: Mar 2009 Location: Kearns Utah Posts: 169	Re: Project : JACK LALANNE Ok Guys, I havent been feeling well because of my diabetes...today. If you saw my fuel pump thread you know mine went out. Well my moms new focus had an alternator and starter go out simultaniously. In wal mart parking lot, the worst part is someone stole money out of her purse while she was shopping. I couldnt let my mom down so I went and sold my I touch, and changed both out in the parking lot... ....so now my adrenaline is going and I'm deciding to be a man, work through the pain and get my truck done Also picked up a new tach... will post pictures this evening of the truck done... Just thought I'd update you all!



Register or Log In To remove these advertisements.

11-30-2009, 05:14 PM	#73
NTR72GMC 2wd FTW!!!! Join Date: Jan 2007 Location: SLC UTAH Posts: 673	Re: Project : JACK LALANNE That sucks about about your moms car. Hope you get feeling better.

12-02-2009, 03:08 AM	#75
Cw72gmc ~Craig~ Join Date: Mar 2009 Location: Kearns Utah Posts: 169	Re: Project : JACK LALANNE Ok Guys, So I'm Officially Twenty One Years Old Now, Finally got my fuel pump done, I also got a new pair of front shocks, just for fun. Oh and to my utah neighbors.... I have a hood, and four 1/4 ton five lug rims with good mis matched tires...up for dibsFREE...need to get them out of my garage , I'm getting a new door. Hope all is well

Register or Log In To remove these advertisements.