Parting out a 1972 K5 Blazer 4x4 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72swbcamo · 09-09-2008, 06:59 PM

Do you have a transfer skid plate on the blazer? If so how much do you want for it. I just need the plate not the cross member.

**Dieselwrencher** · 09-09-2008, 07:18 PM

Yes, I still have the blazer body. I will have to check for the skid plate but I think it is not there. I know when I got the blazer the cross member was already gone. but i will check and get back to you in a few days.

70jnktrk · 09-16-2008, 09:46 PM

diesel...is the rear view mirror in good shape? how much to 85704...PP.thanks

Eighty-6 · 09-16-2008, 10:30 PM

Do you have better pics of the seats and console?

SeventyOne · 09-22-2008, 11:03 PM

Will you take $375 SHIPPED for the seats and console?

rwondrash · 09-22-2008, 11:39 PM

Is the frame in good shape, and if so how much for the frame?

**bigdon-70blazer** · 09-24-2008, 07:32 AM

I need the small strips of metal that hold the weatherstrip on at the taligate opening. Do you have those?

Jason Dodd · 09-24-2008, 10:39 AM

How much for the top and is it in good condition and how much shipped to 74804 Thanks Jason

**Dieselwrencher** · 09-25-2008, 09:31 PM

Quote:

Originally Posted by 70jnktrk

diesel...is the rear view mirror in good shape? how much to 85704...PP.thanks

If I remember correctly the mirror itself is seperating and no good.

**Dieselwrencher** · 09-25-2008, 09:32 PM

Top has been sold.
Seats and console sold.

**Dieselwrencher** · 09-25-2008, 09:33 PM

Quote:

Originally Posted by bigdon-70blazer

I need the small strips of metal that hold the weatherstrip on at the taligate opening. Do you have those?

They are not there, sorry.

**Dieselwrencher** · 09-25-2008, 09:34 PM

Quote:

Originally Posted by rwondrash

Is the frame in good shape, and if so how much for the frame?

The frame is rusty, and is broke right at the LH engine crossmember. You come pick it up and you can have the frame, front axle no mounts but has springs, and rear axle with springs and mounts for $100.

**Dieselwrencher** · 09-25-2008, 09:35 PM

Quote:

Originally Posted by 72swbcamo

Do you have a transfer skid plate on the blazer? If so how much do you want for it. I just need the plate not the cross member.

This piece is gone as well. Sorry.

Rider · 09-27-2008, 05:25 PM

I'm instersted in the rear spring hangers and shackles.
Thanks for your time.
Steve

cooldudecoco · 09-27-2008, 08:48 PM

i would like the blue bow tie emblem on the grill and the rear view mirror
my shipping is 21227
maryland

Blazn C5 · 09-28-2008, 07:15 PM

Is any of the lower body trim or emblems still available ?

72-c20 · 09-29-2008, 04:01 AM

Quote:

Originally Posted by Rider

I'm instersted in the rear spring hangers and shackles.
Thanks for your time.
Steve

and I'd like the rear springs. I can pick up.... wish I'd seen this earlier. I was in Mitchellville this past weekend.

**Dieselwrencher** · 09-30-2008, 02:52 PM

Quote:

Originally Posted by Rider

I'm instersted in the rear spring hangers and shackles.
Thanks for your time.
Steve

Let me make sure they aren't rusted through and in bad shape. I haven't spent much time under this thing. I will post up soon their condition.

**Dieselwrencher** · 09-30-2008, 02:53 PM

Quote:

Originally Posted by Blazn C5

Is any of the lower body trim or emblems still available ?

I still have the CST emblems $15, the 8 350 emblems $15, and the lower moulding pieces that are in the pictures on the blazer $25 for all mouldings that are on it.

**Dieselwrencher** · 09-30-2008, 02:54 PM

Quote:

Originally Posted by cooldudecoco

i would like the blue bow tie emblem on the grill and the rear view mirror
my shipping is 21227
maryland

Grille emblem and grille sold already.
Rear view mirror is not in good shape. I will try to get a picture of it for you.

**Dieselwrencher** · 09-30-2008, 02:55 PM

Quote:

Originally Posted by 72-c20

and I'd like the rear springs. I can pick up.... wish I'd seen this earlier. I was in Mitchellville this past weekend.

I will check to make sure they aren't broken and post up later. Thanks Ryan.

72-c20 · 09-30-2008, 03:18 PM

Quote:

Originally Posted by Dieselwrencher

I will check to make sure they aren't broken and post up later. Thanks Ryan.

I really only need the bottom shortest/thickest springs if the others happen to be broken...

72gmcshorty · 09-30-2008, 07:40 PM

Any chance you could take a pic of the last 10 inches of each corner of frame so i can see if it is the same as my 2wd? I need to replace the four corners...

Blazn C5 · 09-30-2008, 09:49 PM

Quote:

Originally Posted by Dieselwrencher

I still have the CST emblems $15, the 8 350 emblems $15, and the lower moulding pieces that are in the pictures on the blazer $25 for all mouldings that are on it.

I'll take the 350 emblems and the lower moulding pieces. My zip for shipping is 95610. Let me know how you would like payment. Also, if there is any tailgate trim or tailgate lower panel available could you send a pic.
Thanks , Anthony

robs71k5 · 10-07-2008, 11:18 PM

Line me up for the underdash wire harness depending on condition............... Thanks

09-09-2008, 06:59 PM	#51
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: Parting out a 1972 K5 Blazer 4x4 Do you have a transfer skid plate on the blazer? If so how much do you want for it. I just need the plate not the cross member.

09-09-2008, 07:18 PM	#52
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Parting out a 1972 K5 Blazer 4x4 Yes, I still have the blazer body. I will have to check for the skid plate but I think it is not there. I know when I got the blazer the cross member was already gone. but i will check and get back to you in a few days.

09-16-2008, 09:46 PM	#53
70jnktrk Registered User Join Date: Jan 2003 Location: arizona Posts: 213	Re: Parting out a 1972 K5 Blazer 4x4 diesel...is the rear view mirror in good shape? how much to 85704...PP.thanks

09-16-2008, 10:30 PM	#54
Eighty-6 Registered User Join Date: Jul 2008 Location: Round Rock, Tx Posts: 249	Re: Parting out a 1972 K5 Blazer 4x4 Do you have better pics of the seats and console?

09-22-2008, 11:03 PM	#55
SeventyOne Registered User Join Date: Mar 2007 Location: Oakland, Ca Posts: 1,381	Re: Parting out a 1972 K5 Blazer 4x4 Will you take $375 SHIPPED for the seats and console?

09-22-2008, 11:39 PM	#56
rwondrash Registered User Join Date: Sep 2008 Location: Ann Arbor Michigan Posts: 15	Re: Parting out a 1972 K5 Blazer 4x4 Is the frame in good shape, and if so how much for the frame?

09-24-2008, 07:32 AM	#57
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,501	Re: Parting out a 1972 K5 Blazer 4x4 I need the small strips of metal that hold the weatherstrip on at the taligate opening. Do you have those?

09-24-2008, 10:39 AM	#58
Jason Dodd Registered User Join Date: Sep 2008 Location: Shawnee,OK Posts: 1	Re: Parting out a 1972 K5 Blazer 4x4 How much for the top and is it in good condition and how much shipped to 74804 Thanks Jason

09-25-2008, 09:32 PM	#60
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Parting out a 1972 K5 Blazer 4x4 Top has been sold. Seats and console sold.

09-27-2008, 05:25 PM	#64
Rider Registered User Join Date: Sep 2008 Location: Cantonment, Florida Posts: 6	Re: Parting out a 1972 K5 Blazer 4x4 I'm instersted in the rear spring hangers and shackles. Thanks for your time. Steve

09-27-2008, 08:48 PM	#65
cooldudecoco Registered User Join Date: Mar 2008 Location: baltimore Posts: 136	Re: Parting out a 1972 K5 Blazer 4x4 i would like the blue bow tie emblem on the grill and the rear view mirror my shipping is 21227 maryland

09-28-2008, 07:15 PM	#66
Blazn C5 Registered User Join Date: Nov 2007 Location: Orangevale, Ca Posts: 347	Re: Parting out a 1972 K5 Blazer 4x4 Is any of the lower body trim or emblems still available ?

09-30-2008, 07:40 PM	#73
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Parting out a 1972 K5 Blazer 4x4 Any chance you could take a pic of the last 10 inches of each corner of frame so i can see if it is the same as my 2wd? I need to replace the four corners... Attached Images __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd Last edited by 72gmcshorty; 09-30-2008 at 07:40 PM.

10-07-2008, 11:18 PM	#75
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 809	Re: Parting out a 1972 K5 Blazer 4x4 Line me up for the underdash wire harness depending on condition............... Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.