Rear Disc Brake Brackets

[Captainfab]

Chad your brackets were shipped out today. Thanks for the purchase

Originally Posted by 63 extreme low

Payment sent via paypal. Thanks CaptainFab

[N2GMTrux]

Do you make any of these rear brake caliper kits which use the Camaro calipers with the E-Brake. For a five lug diff, on a 1971 chevy pickup

[Captainfab]

Yes I do. They are here in this thread.......
http://www.67-72chevytrucks.com/vboa...d.php?t=382633

Originally Posted by N2GMTrux

Do you make any of these rear brake caliper kits which use the Camaro calipers with the E-Brake. For a five lug diff, on a 1971 chevy pickup

[63 extreme low]

Originally Posted by Captainfab

Chad your brackets were shipped out today. Thanks for the purchase

Captainfab sent me this message two days ago, I received my parts this morning. Wish everyone was this good to deal with. Could you find a way to sell me all the parts I need for my truck!!! BUY FROM CAPTAINFAB!!!!!!!!!!!!!

[Captainfab]

Thanks for the kind words Chad
I try hard to deliver the kind of service I like to receive. Sometimes I get a day or two behind but I try hard to not let that happen. Post some pics when you get those installed.....

Originally Posted by 63 extreme low

Captainfab sent me this message two days ago, I received my parts this morning. Wish everyone was this good to deal with. Could you find a way to sell me all the parts I need for my truck!!! BUY FROM CAPTAINFAB!!!!!!!!!!!!!

[dlisabeth]

I would like a pair of these for my '65 C10. Please let me know when you have some more ready to ship.

Thanks

[Captainfab]

I will do that. However it may be 3 weeks or so as I'm working 70+ hrs a week right now.

Originally Posted by dlisabeth

I would like a pair of these for my '65 C10. Please let me know when you have some more ready to ship.

Thanks

[aggie91]

I have been looking for this post. Found it, now it is in my subscriptions.

[JW76]

I talked to Captainfab yesterday and he confirmed that the Cadillac rear calipers that CPP sells on ebay will work with these brackets. They are $110 a set NEW fully loaded with a flat rate shipping of $18. That is by far the cheapest route to go for calipers.

[Captainfab]

Please keep in mind that these particular brackets are sold out. Although a new updated version is coming soon after I finish my current project.

[powerbench]

Does any one that has done this swap have a set of lincon rotors that they can measure up for me...I bought some caddy rotor and turned down my axles to fit , but would like to know if these brackets would work for me, or i'm i going to have to make my own...thanks

[bill2509]

I put a set of these rear disc brake brackets on by 64swb work great. Capt.Fab is a stand-up guy. here is some free adverisement for the Capt.

[bill2509]

Powerbench, these brackets should work fine with the caddy calipers, in the pic I posted I am running 82 monte carlo front calipers which are the GM small caliper design and so is the caddy caliper but with park brake provisions. hope this helped. But if you still need measurements let me know what you want measured, my rotors are from a 76 Lincoln Mark IV Thanks Bill

[Captainfab]

Which Caddy rotors do you have? Here is a link to a site where you can find dimensions on the Lincoln rotors. You can also fint the exact measurements on your Caddy calipers so you can compare them.

http://catalog.brakewarehouse.com/Sh...Rotors&mode=PA

Originally Posted by powerbench

Does any one that has done this swap have a set of lincon rotors that they can measure up for me...I bought some caddy rotor and turned down my axles to fit , but would like to know if these brackets would work for me, or i'm i going to have to make my own...thanks

[Captainfab]

Those look real nice on there Bill. Would you mind telling us where you got your braided stainless brake hoses?

Thanks for the pic and the kind words

Originally Posted by bill2509

I put a set of these rear disc brake brackets on by 64swb work great. Capt.Fab is a stand-up guy. here is some free adverisement for the Capt.

[bill2509]

Thanks for the comments, I used stop flex hoses from classic tube p/n# SBH9012
and 90 degree side swing banjo bolts worked real well,very easy install. Hope this helps

[powerbench]

thanks guys i'll go down stairs here in a bit and measure up my disc's.....i kinda made up( what i think i need as far as measurments...would rather use something made properly, than some clap together thing i could make with no machine shop..

[powerbench]

Ok after i checked my old receipts and rechecked this site...mine are for and 78 Eldorado, i was trying to find a set of factory backing plates, but to no luck...i think i'm half an inch to small in diameter and a bit thicker...

[powerbench]

http://catalog.brakewarehouse.com/Sh...Rotors&mode=PA

[Captainfab]

Yeah, those Eldo rotors are .50" smaller in diameter, .150" deeper, and .250" thicker. They definitely wouldn't work in place of the Lincoln rotors.

Originally Posted by powerbench

Ok after i checked my old receipts and rechecked this site...mine are for and 78 Eldorado, i was trying to find a set of factory backing plates, but to no luck...i think i'm half an inch to small in diameter and a bit thicker...

[powerbench]

Thanks for all your help Captn Fab.....guess i'm forced to make my own, or keep looking for the eldo backing plates...oh well going to Portland next weekend , maybe i'll find them there

[flips72]

i also would like a set for my 65 c10. please let me know when you have more. thanks alot.

[Trucolur]

Yes this looks like a set of brackets I need !!! 67 c-10 with 12 bolt !! Bolt on brackets and turn down axle flange and get the rotors and calipers I'm done and I have my e-brake as well !!! Correct ???

[Captainfab]

The brackets that this for sale thread is for are long gone......this thread is 3-1/2 years old and these are not my regular production rear disc brackets. Although I have considered a redesign and offering these again.

Is your truck still 6 lug or have you converted it to 5 lug?

Originally Posted by Trucolur

Yes this looks like a set of brackets I need !!! 67 c-10 with 12 bolt !! Bolt on brackets and turn down axle flange and get the rotors and calipers I'm done and I have my e-brake as well !!! Correct ???

[Trucolur]

Originally Posted by Captainfab

These brackets are for putting disc brakes on your 10 or 12 bolt pickup rear differential with the 5 on 5 bolt pattern. They are designed to use the '78 and up metric passenger car calipers and Lincoln Mark IV rotors. A list of part numbers will be provided. The brackets are powder coated in gray hammertone and come with grade 8 fasteners. Price is $70.00 shipped to your door in 2 to 3 days. I have 3 sets of these available.

Yes if I want these brackets how do I or we go about doing so ??? New at all this but very happy with this forum !! Thanks. Let me know !!