Pillar gauge pods............ Any interest? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jrcaprai · 07-03-2010, 09:09 PM

Quote:

Originally Posted by 85bowtie

to me pillar pods scream "ricer"....

x2

Psycho71 · 07-04-2010, 03:46 AM

I'd take a 3 pod. Count me in for one.

Mr79C10 · 07-04-2010, 08:48 AM

So,, Who is gonna start making em?

lifted87 · 07-07-2010, 05:27 PM

i'll take a 3. when would they be done?

78customdeluxe · 07-13-2010, 10:04 PM

I actually wouldnt mind having a 3 pod one for my cummins project, and actually a second one to put on the shelf incase that I have another cummins project and they are not available then, so you could put me down for 2 of them.

**Dieselwrencher** · 07-21-2010, 03:19 PM

Ok, can everyone that didn't vote for a triple, please confirm they are ok with a triple for now? We have 51 right now and if everyone still wants one. I am waiting for Paul to call me back so we can get this one step farther to getting us some pillars. I'm excited!

swb85 · 07-21-2010, 03:39 PM

I put my vote in for a triple.....

**Dieselwrencher** · 07-21-2010, 03:49 PM

Quote:

Originally Posted by jrcaprai

x2

Then I can show you a lot of 5,000lb + Ricers.

mooseknuckles · 07-21-2010, 06:05 PM

Quote:

Originally Posted by N2TRUX

Apearently you haven't looked inside any "real" performance related vehicles recently. Adding gauges to the pillar is much cleaner than hanging below the dash.

I agree.

bikes&bowties · 07-24-2010, 08:16 PM

Any update? This will be BADASS!!!

gchemist · 07-24-2010, 10:08 PM

I'm ready to put money down a three pillar.

Psycho71 · 07-29-2010, 09:34 PM

I voted for a double, but will take a triple if that's what gets made. Count me in for one.

**Dieselwrencher** · 07-29-2010, 10:33 PM

I'll let you guys know when I hear back from him.

smoke · 07-30-2010, 01:45 AM

I" sign up for a 3 gauge pod. Thanks for trying to put this together.

Ken 45LC · 07-30-2010, 12:40 PM

I'll take 2 of the 3 pods.

Thanks for putting this together,

Ken

**Dieselwrencher** · 07-30-2010, 04:01 PM

I figured out why I can't get a hold of my contact. He is on vacation and won't be back in the shop until August 9th. If I happen to hear back from before that, I will let everyone know. Thanks Ryan.

bikes&bowties · 08-01-2010, 07:33 PM

So does anyone know where to find a 2 1/16 inch tach? 0-6000rpm probably?

**Dieselwrencher** · 08-01-2010, 10:30 PM

Have you checked with Stewart Warner yet?

Benelli · 08-01-2010, 10:57 PM

Quote:

Originally Posted by Dieselwrencher

Then I can show you a lot of 5,000lb + Ricers.

I was thinking the same thing. A lot of the "hot" diesels around here have them. I don't like how they look, but it's all up to the owner.

Though I don't know where the hell else to put a tranny temp guage.

bikes&bowties · 08-01-2010, 11:52 PM

I found some autometer gauges on summit.. just didnt look hard enough I guess

thirdstreettito · 08-02-2010, 12:15 AM

Are they being made or designed yet?

**Dieselwrencher** · 08-02-2010, 02:45 PM

No, not yet. They will be as soon as I get everything final with my contact. I will post in here with the info and where to send payment and such once we get the details hammered out.

**Dieselwrencher** · 08-11-2010, 05:12 PM

Ok guys, I got word from Paul today. His supplier is on vacation and is supposed to contact him on Monday. I am going to start a new thread and that thread will be the order thread. Basically, you put your name in there and you will get one as in the order you put in the thread. He also told me the more we have the cheaper it becomes. We already have a lot spoken for so this should be pretty good. I am looking forward to this as I know all of you are. Please look for the new thread.

jonessmc87 · 08-12-2010, 02:21 PM

thanks a lot bud for running lead on this. (i'll take a triple btw) haha

**Dieselwrencher** · 08-12-2010, 05:21 PM

It's not a problem at all. I have wanted one for these body style trucks for a long time!

View Poll Results: How many guages in the pod would you prefer?
Single gauge pod	1	1.18%
Dual gauge Pod	13	15.29%
Triple gauge pod	59	69.41%
Quad gauge pod	12	14.12%
Voters: 85. You may not vote on this poll

07-04-2010, 03:46 AM	#52
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: Pillar gauge pods............ Any interest? I'd take a 3 pod. Count me in for one. __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

07-04-2010, 08:48 AM	#53
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: Pillar gauge pods............ Any interest? So,, Who is gonna start making em? __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

07-07-2010, 05:27 PM	#54
lifted87 Registered User Join Date: Apr 2010 Location: cape cod, ma Posts: 14	Re: Pillar gauge pods............ Any interest? i'll take a 3. when would they be done? __________________ 87 gmc with a 383,6 in lift,everything new inside and out.

07-13-2010, 10:04 PM	#55
78customdeluxe Registered User Join Date: Dec 2002 Location: Upper Sandusky Ohio Posts: 72	Re: Pillar gauge pods............ Any interest? I actually wouldnt mind having a 3 pod one for my cummins project, and actually a second one to put on the shelf incase that I have another cummins project and they are not available then, so you could put me down for 2 of them. __________________ 88 Crewcab Dually 5.9 Cummins, 5306 Eaton 6-speed, converted 4x4 w/52's up front, 90 front clip(parting out) 1986 ElCamino (needs motor) 1970 C30(future service truck for my ag-equipment repair business) 1970 CST10(parting out and partial donor for the '70 C30) 2000 GMC 1500 ext cab sb, z71, 5.3 loaded auto

07-21-2010, 03:19 PM	#56
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Pillar gauge pods............ Any interest? Ok, can everyone that didn't vote for a triple, please confirm they are ok with a triple for now? We have 51 right now and if everyone still wants one. I am waiting for Paul to call me back so we can get this one step farther to getting us some pillars. I'm excited! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-21-2010, 03:39 PM	#57
swb85 On a budget like Fred Sanford Join Date: Oct 2005 Location: Topeka, KS Posts: 2,031	Re: Pillar gauge pods............ Any interest? I put my vote in for a triple..... __________________ '85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD

07-24-2010, 08:16 PM	#60
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: Pillar gauge pods............ Any interest? Any update? This will be BADASS!!!

07-24-2010, 10:08 PM	#61
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Pillar gauge pods............ Any interest? I'm ready to put money down a three pillar. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

07-29-2010, 09:34 PM	#62
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: Pillar gauge pods............ Any interest? I voted for a double, but will take a triple if that's what gets made. Count me in for one. __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

07-29-2010, 10:33 PM	#63
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Pillar gauge pods............ Any interest? I'll let you guys know when I hear back from him. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-30-2010, 01:45 AM	#64
smoke Registered User Join Date: Jan 2009 Location: Critter Country Posts: 5	Re: Pillar gauge pods............ Any interest? I" sign up for a 3 gauge pod. Thanks for trying to put this together.

07-30-2010, 12:40 PM	#65
Ken 45LC Registered User Join Date: Aug 2009 Location: Coalport, Pa Posts: 23	Re: Pillar gauge pods............ Any interest? I'll take 2 of the 3 pods. Thanks for putting this together, Ken

07-30-2010, 04:01 PM	#66
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Pillar gauge pods............ Any interest? I figured out why I can't get a hold of my contact. He is on vacation and won't be back in the shop until August 9th. If I happen to hear back from before that, I will let everyone know. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-01-2010, 07:33 PM	#67
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: Pillar gauge pods............ Any interest? So does anyone know where to find a 2 1/16 inch tach? 0-6000rpm probably?



Register or Log In To remove these advertisements.

08-01-2010, 10:30 PM	#68
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Pillar gauge pods............ Any interest? Have you checked with Stewart Warner yet? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-01-2010, 11:52 PM	#70
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: Pillar gauge pods............ Any interest? I found some autometer gauges on summit.. just didnt look hard enough I guess

08-02-2010, 12:15 AM	#71
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Pillar gauge pods............ Any interest? Are they being made or designed yet? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

08-02-2010, 02:45 PM	#72
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Pillar gauge pods............ Any interest? No, not yet. They will be as soon as I get everything final with my contact. I will post in here with the info and where to send payment and such once we get the details hammered out. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-11-2010, 05:12 PM	#73
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Pillar gauge pods............ Any interest? Ok guys, I got word from Paul today. His supplier is on vacation and is supposed to contact him on Monday. I am going to start a new thread and that thread will be the order thread. Basically, you put your name in there and you will get one as in the order you put in the thread. He also told me the more we have the cheaper it becomes. We already have a lot spoken for so this should be pretty good. I am looking forward to this as I know all of you are. Please look for the new thread. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-12-2010, 02:21 PM	#74
jonessmc87 Registered User Join Date: Jan 2008 Location: Old Saybrook, CT Posts: 61	Re: Pillar gauge pods............ Any interest? thanks a lot bud for running lead on this. (i'll take a triple btw) haha

08-12-2010, 05:21 PM	#75
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Pillar gauge pods............ Any interest? It's not a problem at all. I have wanted one for these body style trucks for a long time! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

Register or Log In To remove these advertisements.