How about a show us you truck dropped thread?

[fpjr0]

any of you guys running a drop in the front of 5" or 6" mind posting a pic from the front showing the cross member? I want to do a 5 or 6 on the front but my oil pan sits about 1.5 inches lower then the cross member... just trying to make a better decision... thanks havent post on a while but lets see if i can post a couple of pics on the truck...i am running 255/55/20 and 295/55/20

[1990_burb]

Originally Posted by flatblkserria82

djm 3 inch drop spindle 3 inch ground force drop springs, axle flip kit and removed overload spring
Attachment 722560

Attachment 722561

I was wondering what would have to be done to my c10 to get this same stance mine is the Big Ten with HD suspension. I ordered a flip kit but haven't attempted to throw it on yet

[Keith Seymore]

Huh. Can't believe I've never participated in this thread:

80 Stepside; cut 2 coils in front and relocated spring hangers on the frame rail in the rear. Also removed the overload spring and maybe one more leaf beyond that.

Down about 4"/6". Tire and wheels are the factory 15x7 aluminum wheels and LR60-15 Goodyears.

[Keith Seymore]

This one is an '87: cut one coil in front and relocated the hangers in the rear.

It's down about 3"/3". 15x8 rally wheels with a P235/75R15 tire.

It was a daily driver for 30 years and 250,000 miles.

K

[jkk]

2" spindles 2" Eibach lowering springs / Rear flip kit drop shackles 18x8 / 18x9.5