TN PARTING 72 GMC 2wd longbed leaf lowered truck

[LCWARRIOR]

How much for the complete power steering unit and disc brake set including spindles shipped to 88001?

[70BLAZERX2]

Originally Posted by LCWARRIOR

How much for the complete power steering unit and disc brake set including spindles shipped to 88001?

The spindle are stock 72 , not dropped spindles ...with or without rotors?

power steering box,pump.w/brackets.and lower steering shaft..(different) for $125 shipped..

will check on disc setup for shipping quote.Thanks

[doubleb's69]

Are the rear springs still available. And if so do you have the u-bolts and are the shackles sold?

[doubleb's69]

Sorry I forgot What is the price to ship them to 50313. thanks

[REEDS 72]

Hi can you check wheel wells for cond rear and take some pics of them thanks shiping 2 84003

[70BLAZERX2]

Originally Posted by doubleb's69

Are the rear springs still available. And if so do you have the u-bolts and are the shackles sold?

its still a complete rolling truck still...I have the rear springs,u-bolts if i can get them off..i have a torch to heat if needed..no problem..I will get a shipping quote..those are long and heavy springs...and are hard to find too.

$100 plus the shipping costs

these have been dearched to give the lowered stance the truck has. just a reminder..

[70BLAZERX2]

Originally Posted by REEDS 72

Hi can you check wheel wells for cond rear and take some pics of them thanks shiping 2 84003

I have a nice pair of rear wheel tubs out,they only have some small dents in them,no rust..I will get pics..$100 shipped

the front inners are rusty on the truck.

[REEDS 72]

Thanks all check back for some pis and be talking to you soon reed

[doubleb's69]

Are they just dearched factory springs? Will I have any problems putting them on my 68 GMC? I want my truck to be lower. Right now my 1/2 ton has 8 leaf pack springs on it and the rear is sitting to high. So I like the stance of your GMC in the picture, and I as well am going to do the old torch lowering on the front.

[70BLAZERX2]

yes stock springs dearched at the spring shop,last owner had them done..sold the truck..then a few years later got it back after it was repo'd ,less eng and trans when they found it..lol

he didnt want to just it..thats when i got it for the cab..

I will check on size and weight over this weekend.Thanks

Originally Posted by doubleb's69

Are they just dearched factory springs? Will I have any problems putting them on my 68 GMC? I want my truck to be lower. Right now my 1/2 ton has 8 leaf pack springs on it and the rear is sitting to high. So I like the stance of your GMC in the picture, and I as well am going to do the old torch lowering on the front.

[doubleb's69]

Alright whenever you get around to it is no problem. I don't know how you would ship them but it would probably be less expensive if they where shiped individualy with the hardware duct taped like crazy to them, but maybe not. Thanks again, by the way are the shackels included as stated at the top of the post.

[70BLAZERX2]

Yes i still have all the springs..and shackles. too.. I am going to strip a 89 camaro and a 90 chevy truck this weekend..I will try and get to the gmc..I need to move it 1st..so it can sit..out of the way...its just nice while they are still rollers..

Its going to be a busy weekend for me

[thejed72]

I'd be interested in the headlight bezels if they're going to clean up nice, no rusting or pitting. Same with the front brow chrome.

[doubleb's69]

[QUOTE=70BLAZERX2;4890770]Yes i still have all the springs..and shackles. too.. I am going to strip a 89 camaro and a 90 chevy truck this weekend..I will try and get to the gmc..I need to move it 1st..so it can sit..out of the way...its just nice while they are still rollers..

Thanks again, I just hope the shipping isn't sky high.

[REEDS 72]

Hi waiting for some pic on the pair of rear wheel tubs you said you have whenever good time for you so I can get you some money and we can get it done thanks reed

[billsbowtie]

70BLAZERX2 [ericks] imternet is broke want be back on till @ least sunday. he said to try & bear with him. bill

[71 GMCDRVR]

interested in the grill...any idea how much shipping to california would be????

[71 GMCDRVR]

And is that 150 for the entire grill (all six pieces)???

[71 GMCDRVR]

If the grille is not being sold complete, or if some components are already spoken for, all i am really looking for is the top rail and the eyebrow trim, maybe we can work something out. Thanks for your time brotha!
Ryan G.

[70BLAZERX2]

Originally Posted by billsbowtie

70BLAZERX2 [ericks] imternet is broke want be back on till @ least sunday. he said to try & bear with him. bill

Thank you bill its late and just want to tell you all that i am back up and running again...and i will be on here again tomorrow to catch up..man 8 days without internet !! wow...i have alot of catching up to do now..

please bare with me on this parts truck..thank you..I will be taking it apart this coming week.

Thanks,Erick

[dukcaln]

I have a 72 looking to lower... will take all the stuff to lower it.... how much shipped to 95688.... shackles, coil, springs...ect...

[REEDS 72]

Hi still waiting for some pic of the wheel tubs you said you have all keep checking back thanks reed

[doubleb's69]

Great your back online. Keep me updated on Rear springs/shackles, etc. shipping to 50313.

[Garage Freak]

Still have the rear end? If so I'm interested if it's a posi dana 60. Price to be picked up?

[dukcaln]

still waiting for a response on those lowering parts