PA Parting out 72 C10 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Arl37 · 08-26-2011, 09:23 AM

YES JET4X4 thats it!. I sent you pm. Just tell me what I owe u and how u want to be paid. Is the brake rod booster grommet in OK condition? That the grommet at the fire wall that the brake rod goes through. If so, I will take it too! I will send u another PM now.
Posted via Mobile Device

**MidLifer** · 08-26-2011, 08:35 PM

How's the dash pad? Can you post a better pic?
Posted via Mobile Device

72cheyenneman · 08-26-2011, 08:56 PM

Do you have the tailpipe bracket hanger that's on the rear frame, driver's side, that bolts to the frame and holds the tailpipe in place? Thanks, Casey

**Cash3481** · 08-26-2011, 10:56 PM

Quote:

Originally Posted by JET4x4

Pics of steering column for cash3481. The column seems tight, the canceling cams work, and the pointer is in good shape.

Jet 4X4
Going to pass on the column! Good luck with the sale and thank you for the pix
Cash3481
Posted via Mobile Device

72GMCK-2500 · 08-27-2011, 06:42 PM

So what do you want for the bed Jim, Please let me know!

SPIRIT OF 76 CHEVY · 08-28-2011, 02:52 AM

I'm in line for the ashtray and how much the glovebox door and how's the dashpad also the rear springs thanks
Posted via Mobile Device

JET4x4 · 08-29-2011, 11:42 PM

Sorry I didn't get a chance to post before the power went out Saturday.

72GMCK-2500: The bed mounts are soft too. How about $75 for the bed. I'll post up some pics in the am.

Arl37: The grommet is there but its torn on the end. I can post a pics tomorrow.

72cheyenneman: $15 for the bracket shipped

MidLifer: The dash pad has a bunch of cracks in it and it's warped on the driver side. I'd say it's junk.

SPIRIT OF 76 CHEVY: I sold the ashtray and glove box door along with the entire dash to a local guy. I think I have a spare ashtray and glove box door in my parts stash if you're still interested, I'll have to check. How about $30 shipped for the rear springs.

athleo · 08-30-2011, 03:31 AM

Jim do you still have the shift linkage from the column to the transmission? how much shipped to 78552? Thanks...dwt.

72cheyenneman · 08-30-2011, 07:52 AM

Jet...When you get the tailpipe hanger off, would you please post a picture? The hanger is in 2 pieces and I'd like to see them before I commit. Thanks, Casey

**FL71C10** · 08-30-2011, 08:56 AM

How much for the ps pump, hoses, pulleys and brackets shipped to 32803? Commercial address.

Thanks!

72GMCK-2500 · 08-30-2011, 02:58 PM

Great Jim i'll take the bed for $75! Yeah hurricane Irene hit us pretty hard down here on the Brandywine river, we got 4 1/2 feet of water in the yard. Please send me a PM to set up a time where i can come a get the bed. Thanks, Andrew.

JET4x4 · 08-31-2011, 11:29 AM

athleo: $20 shipped

pics for 72 tigger

72 tigger · 09-01-2011, 06:07 AM

Jim, Thanks for the pics- appreciate your honesty. After looking at the pics the bumper isn't quite as cherry as I thought ( the bumper I have is about the same condition). I'm going to pass for now & let someone else have a shot at it. If you don't sell it, maybe we can work something out later. Thanks a lot, Kirk

JET4x4 · 09-01-2011, 11:32 PM

Pics for 72cheyenneman

JET4x4 · 09-01-2011, 11:38 PM

72GMCK-2500: PM sent

FL71C10: How about $75 shipped for all the power steering stuff except the box

c1069 · 09-02-2011, 12:48 AM

I'll take seat belts pending if they no have any cracks on all plastics..Thanks

athleo · 09-02-2011, 02:21 AM

Sounds good ill take the linkage, pm me with your info so I can make payment......thanks......dwt.
Posted via Mobile Device

RestoreAmerica · 09-02-2011, 08:02 AM

Do you still have the grill assembly? If so How much for the complete assembly and the blinkers that go in the bumper shipped to 06010? Please PM I need these items.
Thanks

JET4x4 · 09-07-2011, 12:19 AM

athleo: PM sent

c1069: One plastic cover has a small crack in it, see pic. The plastic buckles are in nice shape.

mcbassin · 09-07-2011, 12:29 AM

Never heard any more about the mouldings? Have any luck pulling them? can you save the mounting hardware?
payment ready when your ready for it. thanks

c1069 · 09-07-2011, 12:51 AM

PM me your payment info

athleo · 09-09-2011, 03:14 AM

Jim payment has been sent for the linkage...Thanks...dwt.

thejed72 · 09-09-2011, 09:11 PM

Did the person only take the seat cover? If so, how's the frame and padding? I think I'm close enough to pick up if it's reasonable and available.

6.0 1955 · 09-10-2011, 03:12 PM

If you would please price me the column, auto brake pedal and bracket, and automatic crossmember. I see you already sold the linkage. These items would need to be shipped to 41101. Thanks

m6z · 09-10-2011, 03:32 PM

price for all the trans to shifter linkage?

08-26-2011, 09:23 AM	#51
Arl37 Registered User Join Date: Jul 2011 Location: Valley Center, Ca Posts: 277	Re: Parting out 72 C10 YES JET4X4 thats it!. I sent you pm. Just tell me what I owe u and how u want to be paid. Is the brake rod booster grommet in OK condition? That the grommet at the fire wall that the brake rod goes through. If so, I will take it too! I will send u another PM now. Posted via Mobile Device

08-26-2011, 08:35 PM	#52
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: Parting out 72 C10 How's the dash pad? Can you post a better pic? Posted via Mobile Device

08-26-2011, 08:56 PM	#53
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: Parting out 72 C10 Do you have the tailpipe bracket hanger that's on the rear frame, driver's side, that bolts to the frame and holds the tailpipe in place? Thanks, Casey

08-27-2011, 06:42 PM	#55
72GMCK-2500 Registered User Join Date: Feb 2011 Location: West Chester Pa. Posts: 195	Re: Parting out 72 C10 So what do you want for the bed Jim, Please let me know!

08-28-2011, 02:52 AM	#56
SPIRIT OF 76 CHEVY Registered User Join Date: Mar 2009 Location: ATL, GA Posts: 722	Re: Parting out 72 C10 I'm in line for the ashtray and how much the glovebox door and how's the dashpad also the rear springs thanks Posted via Mobile Device __________________ Stan's short bed fleet 69 custom deluxe swb 69 custom swb shop truck 70 custom sport truck swb 72 GMC super custom swb 72 Custom/10 swb inline 6 auto p/s p/b 77 silverado swb 86 Buick Grand National 92 silverado sport swb 06 silverado crew cab 07 caddy sts 08 f250 4x4 crew cab Sold!!! 12 dodge ram 1500 big horn

08-29-2011, 11:42 PM	#57
JET4x4 Registered User Join Date: Jun 2009 Location: Birdsboro, Pa Posts: 135	Re: Parting out 72 C10 Sorry I didn't get a chance to post before the power went out Saturday. 72GMCK-2500: The bed mounts are soft too. How about $75 for the bed. I'll post up some pics in the am. Arl37: The grommet is there but its torn on the end. I can post a pics tomorrow. 72cheyenneman: $15 for the bracket shipped MidLifer: The dash pad has a bunch of cracks in it and it's warped on the driver side. I'd say it's junk. SPIRIT OF 76 CHEVY: I sold the ashtray and glove box door along with the entire dash to a local guy. I think I have a spare ashtray and glove box door in my parts stash if you're still interested, I'll have to check. How about $30 shipped for the rear springs. __________________ 67 Chevy K20 LWB Fleetside project 85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project 86 m1009 blazer, 6 in lift, 35's, driver 69 c10, 307, long bed, 3 speed, driver 07 Dodge 2500, cc, lb, cummins turbo diesel 00 z28 camaro, ls1, 6 speed, rarely leaves the garage

08-30-2011, 03:31 AM	#58
athleo Registered User Join Date: Jul 2011 Location: Harlingen, Texas Posts: 145	Re: Parting out 72 C10 Jim do you still have the shift linkage from the column to the transmission? how much shipped to 78552? Thanks...dwt.

08-30-2011, 07:52 AM	#59
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: Parting out 72 C10 Jet...When you get the tailpipe hanger off, would you please post a picture? The hanger is in 2 pieces and I'd like to see them before I commit. Thanks, Casey

08-30-2011, 08:56 AM	#60
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: Parting out 72 C10 How much for the ps pump, hoses, pulleys and brackets shipped to 32803? Commercial address. Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

08-30-2011, 02:58 PM	#61
72GMCK-2500 Registered User Join Date: Feb 2011 Location: West Chester Pa. Posts: 195	Re: Parting out 72 C10 Great Jim i'll take the bed for $75! Yeah hurricane Irene hit us pretty hard down here on the Brandywine river, we got 4 1/2 feet of water in the yard. Please send me a PM to set up a time where i can come a get the bed. Thanks, Andrew.

08-31-2011, 11:29 AM	#62
JET4x4 Registered User Join Date: Jun 2009 Location: Birdsboro, Pa Posts: 135	Re: Parting out 72 C10 athleo: $20 shipped pics for 72 tigger Attached Images __________________ 67 Chevy K20 LWB Fleetside project 85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project 86 m1009 blazer, 6 in lift, 35's, driver 69 c10, 307, long bed, 3 speed, driver 07 Dodge 2500, cc, lb, cummins turbo diesel 00 z28 camaro, ls1, 6 speed, rarely leaves the garage

09-01-2011, 06:07 AM	#63
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,255	Re: Parting out 72 C10 Jim, Thanks for the pics- appreciate your honesty. After looking at the pics the bumper isn't quite as cherry as I thought ( the bumper I have is about the same condition). I'm going to pass for now & let someone else have a shot at it. If you don't sell it, maybe we can work something out later. Thanks a lot, Kirk

09-01-2011, 11:32 PM	#64
JET4x4 Registered User Join Date: Jun 2009 Location: Birdsboro, Pa Posts: 135	Re: Parting out 72 C10 Pics for 72cheyenneman Attached Images __________________ 67 Chevy K20 LWB Fleetside project 85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project 86 m1009 blazer, 6 in lift, 35's, driver 69 c10, 307, long bed, 3 speed, driver 07 Dodge 2500, cc, lb, cummins turbo diesel 00 z28 camaro, ls1, 6 speed, rarely leaves the garage

09-01-2011, 11:38 PM	#65
JET4x4 Registered User Join Date: Jun 2009 Location: Birdsboro, Pa Posts: 135	Re: Parting out 72 C10 72GMCK-2500: PM sent FL71C10: How about $75 shipped for all the power steering stuff except the box __________________ 67 Chevy K20 LWB Fleetside project 85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project 86 m1009 blazer, 6 in lift, 35's, driver 69 c10, 307, long bed, 3 speed, driver 07 Dodge 2500, cc, lb, cummins turbo diesel 00 z28 camaro, ls1, 6 speed, rarely leaves the garage

09-02-2011, 12:48 AM	#66
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: Parting out 72 C10 I'll take seat belts pending if they no have any cracks on all plastics..Thanks __________________ Pancho 69 c/10 step side 454/400 with 3.07



Register or Log In To remove these advertisements.

09-02-2011, 02:21 AM	#67
athleo Registered User Join Date: Jul 2011 Location: Harlingen, Texas Posts: 145	Re: Parting out 72 C10 Sounds good ill take the linkage, pm me with your info so I can make payment......thanks......dwt. Posted via Mobile Device

09-02-2011, 08:02 AM	#68
RestoreAmerica Registered User Join Date: Aug 2011 Location: Bristol CT Posts: 441	Re: Parting out 72 C10 Do you still have the grill assembly? If so How much for the complete assembly and the blinkers that go in the bumper shipped to 06010? Please PM I need these items. Thanks

09-07-2011, 12:19 AM	#69
JET4x4 Registered User Join Date: Jun 2009 Location: Birdsboro, Pa Posts: 135	Re: Parting out 72 C10 athleo: PM sent c1069: One plastic cover has a small crack in it, see pic. The plastic buckles are in nice shape. Attached Images __________________ 67 Chevy K20 LWB Fleetside project 85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project 86 m1009 blazer, 6 in lift, 35's, driver 69 c10, 307, long bed, 3 speed, driver 07 Dodge 2500, cc, lb, cummins turbo diesel 00 z28 camaro, ls1, 6 speed, rarely leaves the garage

09-07-2011, 12:29 AM	#70
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Parting out 72 C10 Never heard any more about the mouldings? Have any luck pulling them? can you save the mounting hardware? payment ready when your ready for it. thanks __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

09-07-2011, 12:51 AM	#71
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: Parting out 72 C10 PM me your payment info __________________ Pancho 69 c/10 step side 454/400 with 3.07

09-09-2011, 03:14 AM	#72
athleo Registered User Join Date: Jul 2011 Location: Harlingen, Texas Posts: 145	Re: Parting out 72 C10 Jim payment has been sent for the linkage...Thanks...dwt.

09-09-2011, 09:11 PM	#73
thejed72 Registered User Join Date: Mar 2011 Location: Hummelstown PA Posts: 48	Re: Parting out 72 C10 Did the person only take the seat cover? If so, how's the frame and padding? I think I'm close enough to pick up if it's reasonable and available.

09-10-2011, 03:12 PM	#74
6.0 1955 Registered User Join Date: Jul 2011 Location: Ashland, KY Posts: 91	Re: Parting out 72 C10 If you would please price me the column, auto brake pedal and bracket, and automatic crossmember. I see you already sold the linkage. These items would need to be shipped to 41101. Thanks

09-10-2011, 03:32 PM	#75
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Parting out 72 C10 price for all the trans to shifter linkage? __________________ Doug Looking for a 67-72 short bed driver.....

Register or Log In To remove these advertisements.