PA Parting out 72 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JET4x4 · 08-22-2011, 11:30 AM

I bought this truck to convert my 69 to 5 lug and I don't have much need for the rest of the parts. I'm open to offers on everything. I'd prefer not to ship anything that's big and or heavy.

There isn't very much left of this truck.

I still have the grill and front bumper. I'm open to offer's on both of those, but I will not ship either of them.

I still have the rolling chassis. I'm using the rear and the front suspension parts to convert my 69 to five lug, and I need one of the cross members for another truck. I'm willing to cut and ship other cross members and chassis parts.

Still have the sunvisors, white. No other interior parts left.

Still have the engine and trans, mostly complete. Will sell individual pieces.

I've sold all of the body parts except for the hood. It's in Ok shape. The skin is nice but the front support is getting soft on the driver side.

Make me an offer on whats left. Thanks a lot, Jim

no moa · 08-22-2011, 11:38 AM

PM sent

(in regards to seat and doorpanels/armrests)

OhOneWS6 · 08-22-2011, 11:39 AM

What is the condition of the tail light trim rings and cigarette lighter? Price shipped to 75048?

72 tigger · 08-22-2011, 11:41 AM

Jim, I'll take the grille assy. ( as long as the dingers aren't too deep) & the bumper (the chrome is still pretty decent- right?). I have a friend in your area that can pick this stuff up. Thanks, Kirk

GobbleStalker · 08-22-2011, 11:51 AM

Interested in the Bench seat and seatbelts but would need shipped to 13601.

astevens · 08-22-2011, 12:27 PM

What kind of shape is the tailgate in?

OLEBEATER · 08-22-2011, 12:45 PM

$10 for 2bbl carb/air filter spacer shipped to 22435 ??

motormilitia · 08-22-2011, 02:10 PM

Interested in the heater controls. PM price shipped to 98037?

**jaros44sr** · 08-22-2011, 03:15 PM

Interested in the doors, is there rust in the bottoms and how much for them
Also, if the front inner fenders are in good shape, ill take them

camrycurt · 08-22-2011, 04:28 PM

Is the antenna the stock factory telescoping kind without the spring? - I can't quite make it out in the photo.

If it's a telescoping antenna with no spring please let me know your price shipped to 20176.

Thanks!

**Cash3481** · 08-22-2011, 05:33 PM

Jet 4X4,
I am intreasted in the steering column seat belts and steering wheel. Please send additional pics and we can work out the price.
My brother lives somewhat close so if you need it picked up I can work it out if you dont want to send. Also, I see I was 2nd on the seat belts sorry Gobblestalker!
Mike

c1069 · 08-22-2011, 05:40 PM

2nd in line for seat belts

tr69c10 · 08-22-2011, 09:03 PM

How much for the mirror shipped to 90706

tr69c10 · 08-22-2011, 09:05 PM

How much for the door mirrors shipped to 90706

Micks72 · 08-22-2011, 09:21 PM

How much for ashtray shipped? 93535

JET4x4 · 08-23-2011, 12:14 AM

OhOneWS6: I'll check the condition of the tail light trim and lighter in the a.m.

72 tigger: I'll get better pics of the bumper and grill tomorrow. The chrome on the bumper is nice.

GobbleStalker: The seat is currently spoken for by no moa. I'd let the seat belts go for $40 shipped

astevens: I'll check out the tail gate in the a.m.

motormilitia: Sorry, I need the heater controls for my truck

jaros44sr: There is rust at the bottom of the doors, I'll get better pics. I'm gonna guess the inner fenders are junk, but I'll check them out.

camrycurt: Sorry I need the antenna for my truck

Cash3481: I'd like to get $75 for the column and wheel shipped. The wheel has the standard cracks in it, I'll get better pics.

tr69c10: The mirrors are pitted pretty good, I'll get better pics

Micks72: Hows about $25 shipped for the ash tray

mcbassin · 08-23-2011, 12:40 AM

condition and price of the complete moulding set? upper and lower.
also the upper tailgate mouldings. thanks

Micks72 · 08-23-2011, 12:48 AM

Ouch
Posted via Mobile Device

Micks72 · 08-23-2011, 12:50 AM

I will be in Lancaster Ohio next month how far are you?
Posted via Mobile Device

GobbleStalker · 08-23-2011, 08:37 AM

K I didn't see anyone speak up for the seat on the thread. Are the belts in good shape?

Kevin

no moa · 08-23-2011, 08:43 AM

I was the first pm to ask several questions about the seat and awaiting pictures from him on that and the door panels. Sorry for the confusion.
Posted via Mobile Device

GobbleStalker · 08-23-2011, 09:41 AM

Not a problem I have no issue here.

JET4x4 · 08-23-2011, 10:39 AM

Pics of damaged areas of grill, these are the baddest spots

JET4x4 · 08-23-2011, 10:43 AM

Pics of seat and door panels

JET4x4 · 08-23-2011, 10:50 AM

Steering wheel, lighter, and seat belts

08-22-2011, 11:30 AM	#1
JET4x4 Registered User Join Date: Jun 2009 Location: Birdsboro, Pa Posts: 135	Parting out 72 C10 I bought this truck to convert my 69 to 5 lug and I don't have much need for the rest of the parts. I'm open to offers on everything. I'd prefer not to ship anything that's big and or heavy. There isn't very much left of this truck. I still have the grill and front bumper. I'm open to offer's on both of those, but I will not ship either of them. I still have the rolling chassis. I'm using the rear and the front suspension parts to convert my 69 to five lug, and I need one of the cross members for another truck. I'm willing to cut and ship other cross members and chassis parts. Still have the sunvisors, white. No other interior parts left. Still have the engine and trans, mostly complete. Will sell individual pieces. I've sold all of the body parts except for the hood. It's in Ok shape. The skin is nice but the front support is getting soft on the driver side. Make me an offer on whats left. Thanks a lot, Jim Attached Images __________________ 67 Chevy K20 LWB Fleetside project 85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project 86 m1009 blazer, 6 in lift, 35's, driver 69 c10, 307, long bed, 3 speed, driver 07 Dodge 2500, cc, lb, cummins turbo diesel 00 z28 camaro, ls1, 6 speed, rarely leaves the garage Last edited by JET4x4; 11-20-2011 at 10:20 PM. Reason: updated what's left

08-22-2011, 11:38 AM	#2
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: Parting out 72 C10 PM sent (in regards to seat and doorpanels/armrests) __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd. Last edited by no moa; 08-23-2011 at 08:44 AM.

08-22-2011, 11:39 AM	#3
OhOneWS6 Registered User Join Date: Dec 2009 Location: DFW, TX Posts: 764	Re: Parting out 72 C10 What is the condition of the tail light trim rings and cigarette lighter? Price shipped to 75048? __________________ 72 Cheyenne Super 1/2 LWB White/Dark Yellow 07 Avalanche 2LT 74 Sleek Craft Rebel Jet Boat W/Pontiac 400

08-22-2011, 11:41 AM	#4
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,255	Re: Parting out 72 C10 Jim, I'll take the grille assy. ( as long as the dingers aren't too deep) & the bumper (the chrome is still pretty decent- right?). I have a friend in your area that can pick this stuff up. Thanks, Kirk

08-22-2011, 11:51 AM	#5
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Parting out 72 C10 Interested in the Bench seat and seatbelts but would need shipped to 13601. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

08-22-2011, 12:27 PM	#6
astevens Registered User Join Date: May 2008 Location: Clarksburg, WV Posts: 335	Re: Parting out 72 C10 What kind of shape is the tailgate in?

08-22-2011, 12:45 PM	#7
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: Parting out 72 C10 $10 for 2bbl carb/air filter spacer shipped to 22435 ??

08-22-2011, 02:10 PM	#8
motormilitia Registered User Join Date: Nov 2008 Location: Everett, WA Posts: 33	Re: Parting out 72 C10 Interested in the heater controls. PM price shipped to 98037?

08-22-2011, 03:15 PM	#9
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,767	Re: Parting out 72 C10 Interested in the doors, is there rust in the bottoms and how much for them Also, if the front inner fenders are in good shape, ill take them __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 08-22-2011 at 08:42 PM.

08-22-2011, 04:28 PM	#10
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: Parting out 72 C10 Is the antenna the stock factory telescoping kind without the spring? - I can't quite make it out in the photo. If it's a telescoping antenna with no spring please let me know your price shipped to 20176. Thanks! __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear

08-22-2011, 05:33 PM	#11
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting out 72 C10 Jet 4X4, I am intreasted in the steering column seat belts and steering wheel. Please send additional pics and we can work out the price. My brother lives somewhat close so if you need it picked up I can work it out if you dont want to send. Also, I see I was 2nd on the seat belts sorry Gobblestalker! Mike

08-22-2011, 05:40 PM	#12
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: Parting out 72 C10 2nd in line for seat belts __________________ Pancho 69 c/10 step side 454/400 with 3.07

08-22-2011, 09:03 PM	#13
tr69c10 Registered User Join Date: Feb 2008 Location: bellflower ca Posts: 370	Re: Parting out 72 C10 How much for the mirror shipped to 90706

08-22-2011, 09:05 PM	#14
tr69c10 Registered User Join Date: Feb 2008 Location: bellflower ca Posts: 370	Re: Parting out 72 C10 How much for the door mirrors shipped to 90706

08-22-2011, 09:21 PM	#15
Micks72 Registered User Join Date: Jun 2011 Location: Lancaster, CA Posts: 140	Re: Parting out 72 C10 How much for ashtray shipped? 93535 __________________ *Mick* 1972 C20 Deluxe MADE IN the U.S.A.



Register or Log In To remove these advertisements.

08-23-2011, 12:14 AM	#16
JET4x4 Registered User Join Date: Jun 2009 Location: Birdsboro, Pa Posts: 135	Re: Parting out 72 C10 OhOneWS6: I'll check the condition of the tail light trim and lighter in the a.m. 72 tigger: I'll get better pics of the bumper and grill tomorrow. The chrome on the bumper is nice. GobbleStalker: The seat is currently spoken for by no moa. I'd let the seat belts go for $40 shipped astevens: I'll check out the tail gate in the a.m. motormilitia: Sorry, I need the heater controls for my truck jaros44sr: There is rust at the bottom of the doors, I'll get better pics. I'm gonna guess the inner fenders are junk, but I'll check them out. camrycurt: Sorry I need the antenna for my truck Cash3481: I'd like to get $75 for the column and wheel shipped. The wheel has the standard cracks in it, I'll get better pics. tr69c10: The mirrors are pitted pretty good, I'll get better pics Micks72: Hows about $25 shipped for the ash tray __________________ 67 Chevy K20 LWB Fleetside project 85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project 86 m1009 blazer, 6 in lift, 35's, driver 69 c10, 307, long bed, 3 speed, driver 07 Dodge 2500, cc, lb, cummins turbo diesel 00 z28 camaro, ls1, 6 speed, rarely leaves the garage

08-23-2011, 12:40 AM	#17
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Parting out 72 C10 condition and price of the complete moulding set? upper and lower. also the upper tailgate mouldings. thanks __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-23-2011, 12:48 AM	#18
Micks72 Registered User Join Date: Jun 2011 Location: Lancaster, CA Posts: 140	Re: Parting out 72 C10 Ouch Posted via Mobile Device __________________ *Mick* 1972 C20 Deluxe MADE IN the U.S.A.

08-23-2011, 12:50 AM	#19
Micks72 Registered User Join Date: Jun 2011 Location: Lancaster, CA Posts: 140	Re: Parting out 72 C10 I will be in Lancaster Ohio next month how far are you? Posted via Mobile Device __________________ *Mick* 1972 C20 Deluxe MADE IN the U.S.A.

08-23-2011, 08:37 AM	#20
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Parting out 72 C10 K I didn't see anyone speak up for the seat on the thread. Are the belts in good shape? Kevin __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

08-23-2011, 08:43 AM	#21
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: Parting out 72 C10 I was the first pm to ask several questions about the seat and awaiting pictures from him on that and the door panels. Sorry for the confusion. Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

08-23-2011, 09:41 AM	#22
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Parting out 72 C10 Not a problem I have no issue here. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

08-23-2011, 10:39 AM	#23
JET4x4 Registered User Join Date: Jun 2009 Location: Birdsboro, Pa Posts: 135	Re: Parting out 72 C10 Pics of damaged areas of grill, these are the baddest spots Attached Images __________________ 67 Chevy K20 LWB Fleetside project 85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project 86 m1009 blazer, 6 in lift, 35's, driver 69 c10, 307, long bed, 3 speed, driver 07 Dodge 2500, cc, lb, cummins turbo diesel 00 z28 camaro, ls1, 6 speed, rarely leaves the garage

08-23-2011, 10:43 AM	#24
JET4x4 Registered User Join Date: Jun 2009 Location: Birdsboro, Pa Posts: 135	Re: Parting out 72 C10 Pics of seat and door panels Attached Images __________________ 67 Chevy K20 LWB Fleetside project 85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project 86 m1009 blazer, 6 in lift, 35's, driver 69 c10, 307, long bed, 3 speed, driver 07 Dodge 2500, cc, lb, cummins turbo diesel 00 z28 camaro, ls1, 6 speed, rarely leaves the garage

08-23-2011, 10:50 AM	#25
JET4x4 Registered User Join Date: Jun 2009 Location: Birdsboro, Pa Posts: 135	Re: Parting out 72 C10 Steering wheel, lighter, and seat belts Attached Images __________________ 67 Chevy K20 LWB Fleetside project 85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project 86 m1009 blazer, 6 in lift, 35's, driver 69 c10, 307, long bed, 3 speed, driver 07 Dodge 2500, cc, lb, cummins turbo diesel 00 z28 camaro, ls1, 6 speed, rarely leaves the garage

Register or Log In To remove these advertisements.