Smitty's 67 Build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tinkermc · 05-08-2012, 09:46 PM

I must say again pretty work

VA72C10 · 05-08-2012, 10:02 PM

Looks good! nice work!

**67cheby** · 05-08-2012, 10:40 PM

Nicely done
Posted via Mobile Device

CHRIS67GMC · 05-09-2012, 08:42 AM

Here is a side by side look at the tire clearencee.
Name: 013.jpg
Views: 1981
Size: 27.4 KB

Name: 015 (2).jpg
Views: 1989
Size: 50.6 KB

Name: 016 (2).jpg
Views: 1991
Size: 37.3 KB

CHRIS67GMC · 05-09-2012, 08:52 AM

I got these awsome hinges from the Ring Brothers. I was talking to Mike over there and he told me that anyone off the board here that wants a set they can get 10% off. Pm me or call them direct and mention me.
Name: 017 (2).jpg
Views: 1999
Size: 35.2 KB

Name: 017 (2).jpg
Views: 1999
Size: 35.2 KB

Name: 018 (2).jpg
Views: 1990
Size: 44.5 KB

Name: 019 (2).jpg
Views: 1972
Size: 29.2 KB

**67cheby** · 05-09-2012, 09:55 AM

nice work and killer hinges !

tac106842 · 05-14-2012, 10:39 AM

Chris the truck looks great. I like the billet aluminum hood hinges, they work alot smoother than the stock hinges. I will keep watching your build!

CHRIS67GMC · 05-14-2012, 12:52 PM

Wheel tubs are done. The hood hinges are a awsome part make the hood fit with plenty of adjustment. It opens and closes smooth.
Name: 001 (7).jpg
Views: 4605
Size: 42.7 KB

Name: 001 (7).jpg
Views: 4605
Size: 42.7 KB

Name: 003 (4).jpg
Views: 2672
Size: 47.9 KB

Name: 004 (4).jpg
Views: 1930
Size: 50.1 KB

Name: 005 (2).jpg
Views: 1972
Size: 46.7 KB

**67cheby** · 05-14-2012, 12:54 PM

NICE work

**robnolimit** · 05-14-2012, 09:05 PM

she's lookin a bit 'hippy'

sgaylord · 05-15-2012, 07:32 AM

Looking sweet!

CHRIS67GMC · 05-15-2012, 10:29 PM

Got some work done on he cage.
Name: 008 (3).jpg
Views: 1889
Size: 45.1 KB

Name: 010 (2).jpg
Views: 1884
Size: 41.7 KB

Im making the rear down bars bolt in so the cab can be seperated easy.

Name: 009 (2).jpg
Views: 1881
Size: 44.1 KB

Name: 011 (3).jpg
Views: 1880
Size: 35.5 KB

Tinkermc · 05-15-2012, 10:38 PM

I would love to get a set of those hinges but they may cost more than I paid for the truck. Buut they sure r purdy

**67cheby** · 05-16-2012, 05:53 AM

You have tucked that roll bar in very nicely !
Posted via Mobile Device

sgaylord · 05-16-2012, 07:54 AM

Id love to hang out in your fab shop for a day. Oh the things I could learn! Awesome work.

Steve

tac106842 · 05-16-2012, 11:37 AM

I like the custom cage!

CHRIS67GMC · 05-16-2012, 12:20 PM

Thanks for the comments guys! The main part of the cage is all welded in.
Name: 007 (3).jpg
Views: 1858
Size: 46.6 KB

CHRIS67GMC · 05-16-2012, 10:00 PM

Made some more progress on the cage. Incase anyone was wanting to know we use Mitler Brothers bender and notcher great machines. I use a Lincoln 275 Tig with a I head that swivels with hand controls this works great for getting around the tubes.
Name: 021.jpg
Views: 1875
Size: 46.0 KB

darkhorse970 · 05-16-2012, 10:15 PM

Very nice work! I'm joining in to go along for the ride...

mcbassin · 05-17-2012, 12:01 AM

Another super cool truck. The hinges are a work of art! Did you annodize or powder coat the black one?

CHRIS67GMC · 05-17-2012, 06:53 AM

The Black hinges are anodized. Ring Brothers build them.
http://www.ringbrothers.com/index.cf...ategory_id=125

CHRIS67GMC · 05-17-2012, 05:19 PM

Ups brought me some stoping power today. These monster Wilwoods are awsome. I also know how to make it possible to run 5-4.75 bolt pattern. This makes the center hub much smaller.
Name: 021 (2).jpg
Views: 1810
Size: 34.0 KB

Name: 021 (2).jpg
Views: 1810
Size: 34.0 KB

CHRIS67GMC · 05-18-2012, 03:16 PM

The cage is finished except the front down bars.
Name: 001 (9).jpg
Views: 1788
Size: 42.3 KB

Name: 003 (5).jpg
Views: 1783
Size: 41.5 KB

Name: 002 (8).jpg
Views: 1871
Size: 43.5 KB

tac106842 · 05-18-2012, 04:10 PM

Truck is looking good Chris!

belowme51 · 05-18-2012, 06:17 PM

truck looks sick man, great work.....if you dont mind me asking what width wheels are you using? and if a 12 or 13" wide wheel what is your flange to flange measurement pweese

05-08-2012, 09:46 PM	#51
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Smitty's 67 Build I must say again pretty work

05-08-2012, 10:02 PM	#52
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Smitty's 67 Build Looks good! nice work! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-08-2012, 10:40 PM	#53
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build Nicely done Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-09-2012, 08:42 AM	#54
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Here is a side by side look at the tire clearencee.

05-09-2012, 08:52 AM	#55
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build I got these awsome hinges from the Ring Brothers. I was talking to Mike over there and he told me that anyone off the board here that wants a set they can get 10% off. Pm me or call them direct and mention me.

05-09-2012, 09:55 AM	#56
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build nice work and killer hinges ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-14-2012, 10:39 AM	#57
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Smitty's 67 Build Chris the truck looks great. I like the billet aluminum hood hinges, they work alot smoother than the stock hinges. I will keep watching your build!

05-14-2012, 12:52 PM	#58
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Wheel tubs are done. The hood hinges are a awsome part make the hood fit with plenty of adjustment. It opens and closes smooth.

05-14-2012, 12:54 PM	#59
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build NICE work __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-14-2012, 09:05 PM	#60
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: Smitty's 67 Build she's lookin a bit 'hippy' __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

05-15-2012, 07:32 AM	#61
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Smitty's 67 Build Looking sweet! __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

05-15-2012, 10:29 PM	#62
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Got some work done on he cage. Im making the rear down bars bolt in so the cab can be seperated easy.

05-15-2012, 10:38 PM	#63
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Smitty's 67 Build I would love to get a set of those hinges but they may cost more than I paid for the truck. Buut they sure r purdy

05-16-2012, 05:53 AM	#64
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build You have tucked that roll bar in very nicely ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-16-2012, 07:54 AM	#65
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Smitty's 67 Build Id love to hang out in your fab shop for a day. Oh the things I could learn! Awesome work. Steve __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!



Register or Log In To remove these advertisements.

05-16-2012, 11:37 AM	#66
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Smitty's 67 Build I like the custom cage!

05-16-2012, 12:20 PM	#67
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Thanks for the comments guys! The main part of the cage is all welded in.

05-16-2012, 10:00 PM	#68
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Made some more progress on the cage. Incase anyone was wanting to know we use Mitler Brothers bender and notcher great machines. I use a Lincoln 275 Tig with a I head that swivels with hand controls this works great for getting around the tubes.

05-16-2012, 10:15 PM	#69
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: Smitty's 67 Build Very nice work! I'm joining in to go along for the ride... __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

05-17-2012, 12:01 AM	#70
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Smitty's 67 Build Another super cool truck. The hinges are a work of art! Did you annodize or powder coat the black one? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-17-2012, 06:53 AM	#71
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build The Black hinges are anodized. Ring Brothers build them. http://www.ringbrothers.com/index.cf...ategory_id=125

05-17-2012, 05:19 PM	#72
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Ups brought me some stoping power today. These monster Wilwoods are awsome. I also know how to make it possible to run 5-4.75 bolt pattern. This makes the center hub much smaller.

05-18-2012, 03:16 PM	#73
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build The cage is finished except the front down bars.

05-18-2012, 04:10 PM	#74
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Smitty's 67 Build Truck is looking good Chris!

05-18-2012, 06:17 PM	#75
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: Smitty's 67 Build truck looks sick man, great work.....if you dont mind me asking what width wheels are you using? and if a 12 or 13" wide wheel what is your flange to flange measurement pweese

Register or Log In To remove these advertisements.