63 SWB C10 LT1/4L60E Swap - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Trsmotrhed · 04-06-2013, 09:53 PM

Started working on the other side of bed. Pretty bad shape. Had lots of Bondo also.

Posted via Mobile Device

Trsmotrhed · 04-07-2013, 07:04 PM

Worked on my bed. Now I'll sand blast the bed, spray with epoxy sealer and apply filler to get good and straight. Last I'll spray on high build primer to make sure its perfect.

Posted via Mobile Device

Modges'66 · 04-07-2013, 08:11 PM

Dude!!!!
Looks like a bunch of Hammer & dolly work was spent there! Along with replacing the lower half of the end cap!
Nice work!!!

Trsmotrhed · 04-07-2013, 08:32 PM

Quote:

Originally Posted by Modges'66

Dude!!!!
Looks like a bunch of Hammer & dolly work was spent there! Along with replacing the lower half of the end cap!
Nice work!!!

Yes it was. Thought I was going have to replace the bed panel. The only options are a long bed patch panel and cut it down. Really didn't want to do that. It actually came out really straight.
Posted via Mobile Device

1enick72 · 04-08-2013, 01:53 PM

nice skills and work, looking good

Trsmotrhed · 04-13-2013, 09:37 PM

Finished stripping the paint off to get ready for the epoxy primer.

Started off the day with a voodoo doughnut I brought back from Portland.

Posted via Mobile Device

FRENCHBLUE72 · 04-14-2013, 07:00 AM

Nice work on the bed side... Them guys up at voodoo sure make some interesting donuts..

Trsmotrhed · 04-14-2013, 10:34 PM

[QUOTE=FRENCHBLUE72;6010481]Nice work on the bed side... Them guys up at voodoo sure make some interesting donuts..[/lQUOTE]

Yes they do. They guys I work with got the wild ones. I'm in Portland to Eugene almost monthly. Where is Grants Pass located?
Posted via Mobile Device

Trsmotrhed · 04-20-2013, 07:42 PM

Epoxy primered my bed sides today. I actually got the metal pretty straight, wont need much body filler if any.

Posted via Mobile Device

Bomp · 04-20-2013, 09:18 PM

Killer body work. Awesome work on the bed sides.
Looks great.
Im right in the middle of Portland and Eugene. Keizer which is stuck on the north side of salem by the baseball field.
Again. Great job on the box.

Trsmotrhed · 04-20-2013, 10:15 PM

Thanks bomp, I'm real pleased how the body work is coming . I'm in Oregon all the time. Doing a bridge near Harrison. I'll have to swing by and check out your truck.
Posted via Mobile Device

chad64chevy · 04-20-2013, 11:53 PM

trsmotrhed, killer work on the bedsides! what color are you going to paint the truck?? keep it up truck looks awesome

Trsmotrhed · 04-21-2013, 12:34 AM

Quote:

Originally Posted by chad64chevy

trsmotrhed, killer work on the bedsides! what color are you going to paint the truck?? keep it up truck looks awesome

Thanks chad64, right now I'm wanting to paint it corvette jet stream blue. Wanting it to look like this picture . Might do some silver to break it up.
There's a car show May 4th and trying to get the bed done or at least in primer so I can enter show. It will be a work in progress at the show.

Posted via Mobile Device
Posted via Mobile Device

Modges'66 · 04-21-2013, 12:05 PM

Quote:

Originally Posted by Trsmotrhed

Thanks chad64, right now I'm wanting to paint it corvette jet stream blue. Wanting it to look like this picture . Might do some silver to break it up.

Posted via Mobile Device
Posted via Mobile Device

Dude!
That is the same color exact that I am currently using on my build!...Along with Mercedes, Irridium silver...Nice taste in color, I have to agree!

Modges'66 · 04-21-2013, 12:07 PM

Also, it will look great with that YZ in the back!!!

Trsmotrhed · 04-22-2013, 06:32 PM

Quote:

Originally Posted by Modges'66

Also, it will look great with that YZ in the back!!!

Your truck looks great in that color blue. The heater knobs are awesome also.
Posted via Mobile Device

neto · 04-22-2013, 09:54 PM

Nice work, I'm following your build cause I also have a 63 and the LT1/l460e that's sitting in my shop that's going in. But at this point I'm working on my wife's 66 that I have to finish first.
Ernest

1963c-10 · 04-23-2013, 11:16 AM

The corvette blue will look great on it.

markeb01 · 04-23-2013, 11:33 AM

The metal work on the bed is simply amazing. Outstanding!

88Lt1wagon · 04-23-2013, 02:32 PM

Very nice, I really like that rich blue, and I agree on the silver

Trsmotrhed · 04-23-2013, 03:25 PM

Thanks for the comments. As you guys know its alot of work but very rewarding.

Posted via Mobile Device

Jmorales3181 · 04-25-2013, 07:22 PM

Very nice job! Nothing like old metal.... Def can't do that to sheet metal these days lol. I like the tuned port too always liked how those looked. Keep up the progress
Posted via Mobile Device

Trsmotrhed · 04-28-2013, 10:26 PM

Worked on the inside of the bed sides. Had a little rust on one side where the wood bolts to bed. Cut out two pieces and bent them to the right radius.

What I started with.

Made this piece that goes new the rear corner.

Cut this piece out and started to weld in the new piece and ran out of shielding gas for my mig. Finish next weekend.
Kinda finished product.

Posted via Mobile Device
Posted via Mobile Device

Trsmotrhed · 05-18-2013, 10:47 PM

Worked on my bed sides.

Posted via Mobile Device

Trsmotrhed · 06-22-2013, 12:55 AM

Finally got the body work done and painted flat black for now.

Reworked a Tahoe fuel door setup.

Tahoe fuel door

Welded some exhaust fittings for the elbow and to reduce to the smaller hose.

Posted via Mobile Device
Posted via Mobile Device

04-06-2013, 09:53 PM	#51
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap Started working on the other side of bed. Pretty bad shape. Had lots of Bondo also. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174 Last edited by Trsmotrhed; 04-06-2013 at 09:58 PM.

04-07-2013, 07:04 PM	#52
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap Worked on my bed. Now I'll sand blast the bed, spray with epoxy sealer and apply filler to get good and straight. Last I'll spray on high build primer to make sure its perfect. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

04-07-2013, 08:11 PM	#53
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: 63 SWB C10 LT1/4L60E Swap Dude!!!! Looks like a bunch of Hammer & dolly work was spent there! Along with replacing the lower half of the end cap! Nice work!!! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

04-08-2013, 01:53 PM	#55
1enick72 Registered User Join Date: Jun 2010 Location: Jackson, ME Posts: 287	Re: 63 SWB C10 LT1/4L60E Swap nice skills and work, looking good __________________ 65 short step edited by staff

04-13-2013, 09:37 PM	#56
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap Finished stripping the paint off to get ready for the epoxy primer. Started off the day with a voodoo doughnut I brought back from Portland. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

04-14-2013, 07:00 AM	#57
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 63 SWB C10 LT1/4L60E Swap Nice work on the bed side... Them guys up at voodoo sure make some interesting donuts.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-14-2013, 10:34 PM	#58
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap [QUOTE=FRENCHBLUE72;6010481]Nice work on the bed side... Them guys up at voodoo sure make some interesting donuts..[/lQUOTE] Yes they do. They guys I work with got the wild ones. I'm in Portland to Eugene almost monthly. Where is Grants Pass located? Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

04-20-2013, 07:42 PM	#59
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap Epoxy primered my bed sides today. I actually got the metal pretty straight, wont need much body filler if any. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

04-20-2013, 09:18 PM	#60
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: 63 SWB C10 LT1/4L60E Swap Killer body work. Awesome work on the bed sides. Looks great. Im right in the middle of Portland and Eugene. Keizer which is stuck on the north side of salem by the baseball field. Again. Great job on the box.

04-20-2013, 10:15 PM	#61
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap Thanks bomp, I'm real pleased how the body work is coming . I'm in Oregon all the time. Doing a bridge near Harrison. I'll have to swing by and check out your truck. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

04-20-2013, 11:53 PM	#62
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: 63 SWB C10 LT1/4L60E Swap trsmotrhed, killer work on the bedsides! what color are you going to paint the truck?? keep it up truck looks awesome __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

04-21-2013, 12:07 PM	#65
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: 63 SWB C10 LT1/4L60E Swap Also, it will look great with that YZ in the back!!! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

04-22-2013, 09:54 PM	#67
neto Registered User Join Date: Jan 2007 Location: Madera, California Posts: 291	Re: 63 SWB C10 LT1/4L60E Swap Nice work, I'm following your build cause I also have a 63 and the LT1/l460e that's sitting in my shop that's going in. But at this point I'm working on my wife's 66 that I have to finish first. Ernest

04-23-2013, 11:16 AM	#68
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 63 SWB C10 LT1/4L60E Swap The corvette blue will look great on it. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

04-23-2013, 11:33 AM	#69
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: 63 SWB C10 LT1/4L60E Swap The metal work on the bed is simply amazing. Outstanding! __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502



Register or Log In To remove these advertisements.

04-23-2013, 02:32 PM	#70
88Lt1wagon Registered User Join Date: Sep 2012 Location: Kennewick, WA Posts: 128	Re: 63 SWB C10 LT1/4L60E Swap Very nice, I really like that rich blue, and I agree on the silver __________________ -Jason '66 C10 LWB 2 BBL 283 w/ T-5 '90 V1500 Suburban TBI 350 w/ 700R4

04-23-2013, 03:25 PM	#71
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap Thanks for the comments. As you guys know its alot of work but very rewarding. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

04-25-2013, 07:22 PM	#72
Jmorales3181 Registered User Join Date: Aug 2012 Location: Smithfield rhode island Posts: 722	Re: 63 SWB C10 LT1/4L60E Swap Very nice job! Nothing like old metal.... Def can't do that to sheet metal these days lol. I like the tuned port too always liked how those looked. Keep up the progress Posted via Mobile Device __________________ My frame Layin 63 short bed project http://67-72chevytrucks.com/vboard/s...d.php?t=551353

04-28-2013, 10:26 PM	#73
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap Worked on the inside of the bed sides. Had a little rust on one side where the wood bolts to bed. Cut out two pieces and bent them to the right radius. What I started with. Made this piece that goes new the rear corner. Cut this piece out and started to weld in the new piece and ran out of shielding gas for my mig. Finish next weekend. Kinda finished product. Posted via Mobile Device Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

05-18-2013, 10:47 PM	#74
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap Worked on my bed sides. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

06-22-2013, 12:55 AM	#75
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap Finally got the body work done and painted flat black for now. Reworked a Tahoe fuel door setup. Tahoe fuel door Welded some exhaust fittings for the elbow and to reduce to the smaller hose. Posted via Mobile Device Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

Register or Log In To remove these advertisements.