The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Closed Thread
 
Thread Tools Display Modes
Old 08-23-2014, 10:50 AM   #1
Gobuffalo
Registered User
 
Gobuffalo's Avatar
 
Join Date: Mar 2012
Location: Crestline, CA
Posts: 225
Re: What did you do to your truck today? Chapter II

It's a good news, bad news thing.
Good news.
Brought something home from vacation. It's a 6.0L and a 4L80E.
It's amazing how cheep things are once you get out of California.
Bad news.
When I got back, my Suburban was supposed to be out of the paint shop. He has not touched it any further. Then I'm told, "I need $9400.00 more or I won't finish it". I am already into it for over $5000.00 and supposed to pay $2500.00 more. So, it came home. The outside looks close to done, inside needs work.
Anybody know a good reasonable painter in the San Bernardino area?
Attached Images
 
Gobuffalo is offline  
Old 08-23-2014, 02:51 PM   #2
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
Thumbs up Re: What did you do to your truck today? Chapter II

I have the motor cover about done. I also have a new pan for the electric fans to install also.
Cover will go back to shop on Monday to have the front piece weld on it. Drove the truck this morning and it ran fine didn't notice any heat build up at all and temp gauge read just fine.
Attached Images
    
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline  
Old 08-23-2014, 02:51 PM   #3
Elliot949
Registered User
 
Elliot949's Avatar
 
Join Date: Sep 2010
Location: Winfield, Ks.
Posts: 4,162
Re: What did you do to your truck today? Chapter II

Quote:
Originally Posted by Gobuffalo View Post
It's a good news, bad news thing.
Good news.
Brought something home from vacation. It's a 6.0L and a 4L80E.
It's amazing how cheep things are once you get out of California.
Bad news.
When I got back, my Suburban was supposed to be out of the paint shop. He has not touched it any further. Then I'm told, "I need $9400.00 more or I won't finish it". I am already into it for over $5000.00 and supposed to pay $2500.00 more. So, it came home. The outside looks close to done, inside needs work.
Anybody know a good reasonable painter in the San Bernardino area?

Painter and reasonable... those two words never go together...
__________________
Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD
Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847

Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD

B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210
Elliot949 is offline  
Old 08-23-2014, 05:49 PM   #4
texjake
Registered User
 
texjake's Avatar
 
Join Date: Nov 2013
Location: Lubbock, TX
Posts: 283
Re: What did you do to your truck today? Chapter II

I worked on getting the interior floor cleaned out today & getting it ready to install the sound deader, new carpet and new seatbelts. The seat is at the upholstery shop getting done. It's going to look great after it's all done. I set the carpet in there temporary just to see how it's going look.
Attached Images
   
__________________
"Now all I need is a shop to go with my shop vac!"
texjake is offline  
Old 08-24-2014, 05:06 PM   #5
Saclandman
Registered User
 
Saclandman's Avatar
 
Join Date: May 2013
Location: Sacramento, CA
Posts: 487
Re: What did you do to your truck today? Chapter II

Hung my cleaned up driver's side fender today.
Attached Images
 
__________________
Rich J.

1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD
2002 Chevy Tahoe 4X4 5.3L SOLD
2015 Chevy Silverado Crew 4X4 5.3L
Saclandman is offline  
Old 08-24-2014, 05:25 PM   #6
jmorri34
Registered User
 
jmorri34's Avatar
 
Join Date: Sep 2012
Location: Spring, Tx.
Posts: 479
Re: What did you do to your truck today? Chapter II

Took it out to the car show Saturday night!!
Attached Images
  
__________________
1969 cst prostreet

http://67-72chevytrucks.com/vboard/s...d.php?t=568661
jmorri34 is offline  
Old 08-24-2014, 10:46 PM   #7
Ozzy2013
Registered User
 
Ozzy2013's Avatar
 
Join Date: Oct 2013
Location: Elkton
Posts: 693
Re: What did you do to your truck today? Chapter II

Looks good.
Ozzy2013 is offline  
Old 08-24-2014, 11:42 PM   #8
Econman
Registered User
 
Econman's Avatar
 
Join Date: Feb 2011
Location: Knoxville, TN
Posts: 362
Re: What did you do to your truck today? Chapter II

Ordered a new Hughes rebuild kit for my TH350, including new sprags.. plus a TCI shift improver kit..
Econman is offline  
Old 08-25-2014, 07:11 AM   #9
Elliot949
Registered User
 
Elliot949's Avatar
 
Join Date: Sep 2010
Location: Winfield, Ks.
Posts: 4,162
Re: What did you do to your truck today? Chapter II

I got my Overload springs Sand Blasted, Primed and Painted over the weekend... I also sand blasted the wheel tubs and got them in Epoxy Primer...
Attached Images
 
__________________
Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD
Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847

Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD

B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210
Elliot949 is offline  
Old 08-25-2014, 03:49 PM   #10
jacob822
Registered User
 
jacob822's Avatar
 
Join Date: Aug 2014
Location: gresham, oregon
Posts: 14
Re: What did you do to your truck today? Chapter II

Got my headers, holeshot 2400 converter, lifters, double roller timing chain set, air cleaner, valve stem seals, hardened trans input shaft, and some other odds and ends, getting ready for the install.
jacob822 is offline  
Old 08-25-2014, 10:56 PM   #11
74baggedbug
Registered User
 
Join Date: Oct 2011
Location: Houston tx
Posts: 701
Re: What did you do to your truck today? Chapter II


Removed old homemade fuel tank and installed a boydwelding tank.. Highly recommend, easy installation and fit perfectly .. Also removed old fuel lines and installed steel braided & all AN fittings
74baggedbug is offline  
Old 08-26-2014, 11:47 AM   #12
Mike_The_Grad
Senior Member
 
Mike_The_Grad's Avatar
 
Join Date: Oct 2013
Location: Santa Paula, CA
Posts: 622
Re: What did you do to your truck today? Chapter II

Been a while since I've posted on here. But I got it back on the road and put it right to work. I can't say no to free firewood, especially if all I have to do is drive out my drive way and drive onto my next door neighbors property... I was in process of trying to find an affordable material for heat/sound deadener, when I was at the local 99¢ store I found these windshield sun reflectors for $1.27 a piece. Foil on one side foam the other. Bought 5. I stopped by hardware store on way home to pick up roll of aluminum foil tape for ten bux. I spray adhesive the shields back to back so foil would be exposed on both sides, and turned them into panels. I used some good stubble-sided dicky tape in the contours and corners so as not to let them lift. Then foil sealed all sides. I was about four square feet short so picked up a few more to finish the job. Turned out far better than I had predicted, also far cheaper...(I need all the gas money I can get!) I fully insulated the floor pan from firewall to gas tank for about $20! Also I got the low pile carpet for free from a friend. I'm no carpet installer, and I accept that. But it will get me by until I can afford better. It definetly keeps the cab cooler and quieter, even with my "super" 40's! Now I can actually hear my stereo.
Attached Images
   
__________________
1972 C/10 LWB - Mine
1964 C/10 LWB - My Dad's

Instagram: Mike_The_Grad
Mike_The_Grad is offline  
Old 08-27-2014, 02:47 PM   #13
texjake
Registered User
 
texjake's Avatar
 
Join Date: Nov 2013
Location: Lubbock, TX
Posts: 283
Re: What did you do to your truck today? Chapter II

I got my seat back from the upholstery shop yesterday and I set it in the truck temporary just to see how great it's going look. I ordered the seat cover from Seatz out of Anaheim, CA & had a local upholstery shop put the new cover on & installed new foam. I also included a before pic.
Attached Images
   
__________________
"Now all I need is a shop to go with my shop vac!"
texjake is offline  
Old 08-27-2014, 03:16 PM   #14
Econman
Registered User
 
Econman's Avatar
 
Join Date: Feb 2011
Location: Knoxville, TN
Posts: 362
Re: What did you do to your truck today? Chapter II

Very nice!
Econman is offline  
Old 08-27-2014, 03:42 PM   #15
texjake
Registered User
 
texjake's Avatar
 
Join Date: Nov 2013
Location: Lubbock, TX
Posts: 283
Re: What did you do to your truck today? Chapter II

Quote:
Originally Posted by Econman View Post
Very nice!
Thanks! it's been a huge transformation. And I'm still not done...lol
__________________
"Now all I need is a shop to go with my shop vac!"
texjake is offline  
Old 08-27-2014, 08:34 PM   #16
ole dollor
Registered User
 
ole dollor's Avatar
 
Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
Re: What did you do to your truck today? Chapter II

Quote:
Originally Posted by texjake View Post
I got my seat back from the upholstery shop yesterday and I set it in the truck temporary just to see how great it's going look. I ordered the seat cover from Seatz out of Anaheim, CA & had a local upholstery shop put the new cover on & installed new foam. I also included a before pic.
looking good , looks better by the day...
ole dollor is offline  
Old 08-29-2014, 04:44 PM   #17
texjake
Registered User
 
texjake's Avatar
 
Join Date: Nov 2013
Location: Lubbock, TX
Posts: 283
Re: What did you do to your truck today? Chapter II

Quote:
Originally Posted by ole dollor View Post
looking good , looks better by the day...
Thanks Don!
__________________
"Now all I need is a shop to go with my shop vac!"
texjake is offline  
Old 08-31-2014, 12:00 AM   #18
allchevy58
Senior Member
 
allchevy58's Avatar
 
Join Date: Aug 2011
Location: Reno, Nv.
Posts: 1,437
Re: What did you do to your truck today? Chapter II

Bent up some tailpipes today. Got tired of the turndowns after the axle.



__________________
1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison
allchevy58 is offline  
Old 08-31-2014, 12:32 AM   #19
texjake
Registered User
 
texjake's Avatar
 
Join Date: Nov 2013
Location: Lubbock, TX
Posts: 283
Re: What did you do to your truck today? Chapter II

Quote:
Originally Posted by allchevy58 View Post
Bent up some tailpipes today. Got tired of the turndowns after the axle.



Damn! Nice looking shop you got there!
__________________
"Now all I need is a shop to go with my shop vac!"
texjake is offline  
Old 08-31-2014, 12:36 AM   #20
texjake
Registered User
 
texjake's Avatar
 
Join Date: Nov 2013
Location: Lubbock, TX
Posts: 283
Re: What did you do to your truck today? Chapter II

Nothing major, I wired up my glove box light tonight. It's all in the details right?
Attached Images
 
__________________
"Now all I need is a shop to go with my shop vac!"
texjake is offline  
Old 08-31-2014, 07:19 AM   #21
midniteblues
Registered User
 
midniteblues's Avatar
 
Join Date: Jul 2011
Location: strausstown pa
Posts: 3,394
Re: What did you do to your truck today? Chapter II

got some epoxy on the cab and finally sprayed some color in the intieror.
in the 3rd pic you can see the darker green between the windsheild and dash pad(thanks sstim)

next is the drip rail sealer and gonna try too start the process of getting the doors and windows jammed out in 503.

oh and because everybody like before and after pic's just mine are backwards
Attached Images
     
__________________
81 camaro 355 4/spd 342 posi my first love.
67 swb step 454/4spd ott 373 posi 4/7 drop.
2000 s10 zr2 little blue truck that never gets stuck.
'74 heald super bronc vt8. tecumseh powered moon rover.
midniteblues is offline  
Old 09-01-2014, 11:59 PM   #22
allchevy58
Senior Member
 
allchevy58's Avatar
 
Join Date: Aug 2011
Location: Reno, Nv.
Posts: 1,437
Re: What did you do to your truck today? Chapter II

Thanks.
__________________
1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison
allchevy58 is offline  
Old 09-02-2014, 01:08 AM   #23
Tree-50
Registered User
 
Join Date: Jul 2014
Location: Dallas, Texas
Posts: 120
Re: What did you do to your truck today? Chapter II

Finished my seat brackets and got it all in!
Attached Images
 
Tree-50 is offline  
Old 09-02-2014, 03:54 PM   #24
chevytruckluver
Eat, Sleep, Drive a Chevy
 
chevytruckluver's Avatar
 
Join Date: Apr 2010
Location: the town of the cow, Texas
Posts: 1,152
Re: What did you do to your truck today? Chapter II

Got the wood bolted down and the bed put on.
Attached Images
   
__________________
Trey
Silence may be Golden, but Duct Tape is Silver!

72 Short Step
57 "big window" short step
chevytruckluver is offline  
Old 08-31-2014, 11:17 AM   #25
Coley
Registered User
 
Coley's Avatar
 
Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
Re: What did you do to your truck today? Chapter II

I did a nice, easy maintenance afternoon where I changed the oil, put on a new lower radiator hose, lubed/greased the front end, rotated the 2 front tires and changed out the power steering fluid and did a little underhood clean and tidy stuff. Nothing too serious.....and, well, it was actually last weekend....LOL
(note: still haven't resolved the increased power steering 'whine' tho'....)
All Good
Coley
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL
1966 Chevy 1/2 ton (Florida- Red/white)
1972 Chevy 1/2 ton (California- Blue/white)
2005 Chevy Silverado HD2500/Duramax
2000 Dodge Ram 1500
Coley is offline  
Closed Thread

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com