The Drop Thread - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jitteryguy · 02-15-2011, 10:05 AM

265/35/22's with a photo shop lower'n !

jitteryguy · 02-15-2011, 10:08 AM

reality !
3 drop spindle's, 2" shackles, 4 or 5 leaf's remove'd with 265/35/22's on TowNasty wheel's.
I have tubar upper and lower controll arm's, 4 link and bag's to go on it when I get home.

red02chevy · 02-15-2011, 03:49 PM

Here are some pictures of my truck from a month or two ago...now it's sitting on jack stands with the motor and tranny pulled.

Chlsnk · 02-15-2011, 05:04 PM

Quote:

Originally Posted by red02chevy

Here are some pictures of my truck from a month or two ago...now it's sitting on jack stands with the motor and tranny pulled.

Looks good you should paint your drums white or black since they are so exposed.

red02chevy · 02-15-2011, 06:43 PM

Quote:

Originally Posted by Chlsnk

Looks good you should paint your drums white or black since they are so exposed.

if i do the drums i have to do the whole chassis.

thats what happened to my last c10 and look how it ended up .

franky69c10 · 02-15-2011, 09:13 PM

^^^ NICE

Posted via Mobile Device

3r!c84 · 02-15-2011, 10:17 PM

very nice. got any pics with the body lol

*87 chevy silverado* · 02-15-2011, 10:20 PM

Quote:

Originally Posted by 3r!c84

very nice. got any pics with the body lol

he sold the frame

Leedogg · 02-15-2011, 10:30 PM

wow- that chassis is sick.

red02chevy · 02-16-2011, 12:45 PM

Quote:

Originally Posted by 3r!c84

very nice. got any pics with the body lol

I actually sold it as it sits right before I got my white 86. I don't know if the new owner has done anything with it or not?

monte0185 · 02-16-2011, 03:14 PM

Here's Mine. DJM 3/5 kit. Think i might cut 1/2 coil out of the front when I have time. 18x8 front 20x10 Rear.

BadCompany · 02-27-2011, 08:00 AM

I have a '87 swb with 4 leafs in the rear no c-notch would I have any trouble running a flip kit?

flamingbig10 · 02-27-2011, 10:57 AM

you'll be fine but you'll need to remove the factory bump stops there's 4 rivets that hold them on and replace them with stubby ones

Chlsnk · 02-27-2011, 11:29 AM

Quote:

Originally Posted by red02chevy

if i do the drums i have to do the whole chassis.

thats what happened to my last c10 and look how it ended up .

Awesome frame.

85/05Silverado · 02-27-2011, 09:56 PM

Quote:

Originally Posted by monte0185

Here's Mine. DJM 3/5 kit. Think i might cut 1/2 coil out of the front when I have time. 18x8 front 20x10 Rear.

nice truck
do your front wheels tuck inside the fender if you were to lower it more? what size of tires, are they the boss 338's

thanks stephen

Puglia10 · 03-24-2011, 04:39 PM

^ I know its kind of old but, monte0185 I have that same kit and agree the front needs to come down a little, how much is half a coil cut?
Love the truck though!

CuRtdOgG · 03-25-2011, 03:36 PM

Lowered 5/5 DJM flip kit in the rear and western chassis 2.5" spindles and djm 2.5" lowering springs up fron

IMAG0253-1-1 by catkinson896, on Flickr

CuRtdOgG · 03-25-2011, 03:58 PM

How do you remove those rivets??

mooseknuckles · 03-25-2011, 05:16 PM

grind the head off, or cut a "X" in the head, and pound it out with a chisel and a BFH!

canadian trucker · 03-25-2011, 05:58 PM

3/5 Drop. Shackles & Hangers out back, 3" Drop Spindles with Bags out front.
Tires 275/60/15 Rear, 245/50/15 Front

Name: Image014.jpg
Views: 8484
Size: 34.4 KB

Now no longer residing in my driveway, but the local shop.

Front on a Porterbuild Dropmember, Rear on jack stands

Name: IMG_1098.jpg
Views: 7284
Size: 51.0 KB

Name: IMG_1098.jpg
Views: 7284
Size: 51.0 KB

Pop's C-10 · 03-25-2011, 10:02 PM

Quote:

Originally Posted by canadian trucker

3/5 Drop. Shackles & Hangers out back, 3" Drop Spindles with Bags out front.
Tires 275/60/15 Rear, 245/50/15 Front

Attachment 719868

Now no longer residing in my driveway, but the local shop.

Front on a Porterbuild Dropmember, Rear on jack stands

Attachment 719869

what kind of motor is that..

87chevy.com · 03-26-2011, 12:00 AM

Front: McGaughys drop spindles, stock springs
Rear: 81-91 Suburban rear hangers and McGaughys drop shackle with the overload spring removed.

this is why they dont make lowering hangers for suburbans... they come like that from the factory!

They dont bolt in, but you can use one of the factory holes, and drill the rest and add 3/8 grade 8 hardware.
clint

canadian trucker · 03-26-2011, 07:17 PM

Quote:

Originally Posted by Pop's C-10

what kind of motor is that..

4L Lexus V8

will have to start a build thread soon

pumpgas · 06-21-2011, 08:35 PM

So am I correct in assuming that you have to cut the rear bed floor support for the drop hanger install?

1tonchevy · 06-21-2011, 09:50 PM

Before

After 3inch spindals,cut one coil from stock springs,2 inch hangers and 2 inch shackles, removed 20 leafs aside! still needs lower. oh and 16inch wheels front 16.5 in the rear

02-15-2011, 10:05 AM	#76
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: The Drop Thread 265/35/22's with a photo shop lower'n ! Attached Images __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

02-15-2011, 10:08 AM	#77
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: The Drop Thread reality ! 3 drop spindle's, 2" shackles, 4 or 5 leaf's remove'd with 265/35/22's on TowNasty wheel's. I have tubar upper and lower controll arm's, 4 link and bag's to go on it when I get home. Attached Images __________________ *Goat Lube Express, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's) Last edited by jitteryguy; 02-15-2011 at 10:11 AM. Reason: gramer*

02-15-2011, 03:49 PM	#78
red02chevy Registered User Join Date: Aug 2007 Location: TX Posts: 499	Re: The Drop Thread Here are some pictures of my truck from a month or two ago...now it's sitting on jack stands with the motor and tranny pulled. __________________

02-15-2011, 09:13 PM	#81
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: The Drop Thread ^^^ NICE Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

02-15-2011, 10:17 PM	#82
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: The Drop Thread very nice. got any pics with the body lol __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

02-15-2011, 10:30 PM	#84
Leedogg Registered User Join Date: Jan 2010 Location: Brewton AL Posts: 236	Re: The Drop Thread wow- that chassis is sick. __________________ 1989 Chevy Crew Cab Dually - 454/400, Trans Am Hauler, Future bagged project. 96 Trans Am: 383/m6 - 11.98@115 on 315 M/T D/R's - 408rwhp 394 rwtq 05 VW Passat TDI - 38mpg @75mph 07 Bandit 1250S - Two wheeled fun! Click here to see my FQuick Garage!

02-16-2011, 03:14 PM	#86
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: The Drop Thread Here's Mine. DJM 3/5 kit. Think i might cut 1/2 coil out of the front when I have time. 18x8 front 20x10 Rear. __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together. Last edited by monte0185; 02-16-2011 at 03:15 PM.

02-27-2011, 08:00 AM	#87
BadCompany Registered User Join Date: Sep 2010 Location: Boondox, AL Posts: 41	Re: The Drop Thread I have a '87 swb with 4 leafs in the rear no c-notch would I have any trouble running a flip kit?

02-27-2011, 10:57 AM	#88
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: The Drop Thread you'll be fine but you'll need to remove the factory bump stops there's 4 rivets that hold them on and replace them with stubby ones __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-24-2011, 04:39 PM	#91
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 387	Re: The Drop Thread ^ I know its kind of old but, monte0185 I have that same kit and agree the front needs to come down a little, how much is half a coil cut? Love the truck though! __________________ 1979 c30 3+3 dually 1946 GMC Last edited by Puglia10; 03-24-2011 at 04:40 PM.

03-25-2011, 03:36 PM	#92
CuRtdOgG Registered User Join Date: Aug 2010 Location: norman, ok Posts: 305	Re: The Drop Thread Lowered 5/5 DJM flip kit in the rear and western chassis 2.5" spindles and djm 2.5" lowering springs up fron IMAG0253-1-1 by catkinson896, on Flickr

03-25-2011, 03:58 PM	#93
CuRtdOgG Registered User Join Date: Aug 2010 Location: norman, ok Posts: 305	Re: The Drop Thread How do you remove those rivets??

03-25-2011, 05:16 PM	#94
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: The Drop Thread grind the head off, or cut a "X" in the head, and pound it out with a chisel and a BFH! __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

03-25-2011, 05:58 PM	#95
canadian trucker A day should have 30 hours. Join Date: Jul 2005 Location: BC, Canada Posts: 248	Re: The Drop Thread 3/5 Drop. Shackles & Hangers out back, 3" Drop Spindles with Bags out front. Tires 275/60/15 Rear, 245/50/15 Front Now no longer residing in my driveway, but the local shop. Front on a Porterbuild Dropmember, Rear on jack stands

03-26-2011, 12:00 AM	#97
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,261	Re: The Drop Thread Front: McGaughys drop spindles, stock springs Rear: 81-91 Suburban rear hangers and McGaughys drop shackle with the overload spring removed. this is why they dont make lowering hangers for suburbans... they come like that from the factory! They dont bolt in, but you can use one of the factory holes, and drill the rest and add 3/8 grade 8 hardware. clint __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress



Register or Log In To remove these advertisements.

06-21-2011, 08:35 PM	#99
pumpgas Registered User Join Date: Dec 2008 Location: indiana Posts: 304	Re: The Drop Thread So am I correct in assuming that you have to cut the rear bed floor support for the drop hanger install? __________________ 00' Z28 ("wifes" car) 92' Mustang w/sbc everything needs a little heart beat 87' GMC Sierra Classic Short Bed Fleet side almost stock 69' Chevy short step carbed 6.0 w/400th trans. Completed w/325 miles on it

06-21-2011, 09:50 PM	#100
1tonchevy C35 Crew Dually Join Date: Nov 2008 Location: Belleville Ontario Posts: 1,116	Re: The Drop Thread Before After 3inch spindals,cut one coil from stock springs,2 inch hangers and 2 inch shackles, removed 20 leafs aside! still needs lower. oh and 16inch wheels front 16.5 in the rear __________________ If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892

Register or Log In To remove these advertisements.