IN Restored Auto Tilt Column - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 04-26-2012, 03:25 PM

Quote:

Originally Posted by southern parts

how much pressure is put on the weld as you turn the wheel, even if you dont have power steering. it would have to be a really crappy weld to break under normal use of turning the wheel.

Yes... I have done plenty of butt welds in my day. Also worked as a glazier for 10 years. 6 years of that employed at one of the largest glazing companies in the midwest. If anyone is interested in seeing some of my work please feel free to look here http://www.yourascent.com/the-view/p...px?section=All. This building was designed by Daniel Libeskind, a world renowned architect known for his ground breaking asymmetrical buildings which seem to defy gravity. He was also chosen as the lead architect with the design of the monumental new World Trade Center Project. Me and my brother welded frames attached to structural tubed steel for every high end balcony on this condo and hand set every panel all the way up to the 27th floor penthouse.

HeavyMetalChevy · 04-26-2012, 03:32 PM

and here are some pics

HeavyMetalChevy · 04-26-2012, 03:37 PM

I think I got a steering shaft covered.

ls1nova71 · 04-26-2012, 03:59 PM

Quote:

Originally Posted by southern parts

how much pressure is put on the weld as you turn the wheel, even if you dont have power steering. it would have to be a really crappy weld to break under normal use of turning the wheel.

True, but I've seen some really crappy welds done by people who think they're doing a good job. Add that to the fact that you cannot inspect it because it's inside a column. It's just not really worth the risk for what, a hundred dollars or so?
Posted via Mobile Device

BBC Motorhead · 04-28-2012, 10:46 AM

Just wondering what you have available at the moment? Thanks

HeavyMetalChevy · 04-28-2012, 08:34 PM

Quote:

Originally Posted by BBC Motorhead

Just wondering what you have available at the moment? Thanks

I have around 5-6 van tilts, one rv tilt which has the correct length steering shaft, and one true truck tilt.

HeavyMetalChevy · 04-30-2012, 09:59 PM

ttt

IndyRich · 05-01-2012, 04:28 AM

Hey buddy, Just wanted to check in and say hi. I recognized that building you worked on right away.Awesome structure. When I go to Cincy to see Reds games it is next to the Roebling Bridge which was designed by Roebling before he did the Brooklyn bridge.
(I trust my bed supports are still safe. I promise to get over to you on my way to Cincy for a game)

HeavyMetalChevy · 05-01-2012, 02:59 PM

Quote:

Originally Posted by IndyRich

Hey buddy, Just wanted to check in and say hi. I recognized that building you worked on right away.Awesome structure. When I go to Cincy to see Reds games it is next to the Roebling Bridge which was designed by Roebling before he did the Brooklyn bridge.
(I trust my bed supports are still safe. I promise to get over to you on my way to Cincy for a game)

Yeah man! Sweet you know some local Cinci/ Covington history as well. Bed sills are still hanging around. No worries there. I got plenty of room here so def. not in the way.

72Blazing · 05-01-2012, 10:21 PM

Payment sent on Truck Tilt.
Thanks Duane

HeavyMetalChevy · 05-01-2012, 10:34 PM

Quote:

Originally Posted by 72Blazing

Payment sent on Truck Tilt.
Thanks Duane

Yes sir.. I was wondering why nobody jumped on it. It's going to be awesome!!! I will dedicate a thread for it!

72Blazing · 05-01-2012, 10:36 PM

Step by step on restore process would be a cool thread.

HeavyMetalChevy · 05-01-2012, 10:41 PM

Quote:

Originally Posted by 72Blazing

Step by step on restore process would be a cool thread.

too many secrets there buddy! A lot of steps and plenty of cussing at first!!! BAHAHAHAH

72Blazing · 05-01-2012, 11:03 PM

I bet. That is why I leave it to the pros!

big d's red67 · 06-03-2012, 07:32 PM

do I have this right, you do not move the NNS to the truck location when you rebuild a van column to put in a truck?

04-26-2012, 03:32 PM	#77
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Restored Auto Tilt Column and here are some pics Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

04-26-2012, 03:37 PM	#78
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Restored Auto Tilt Column I think I got a steering shaft covered. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

04-28-2012, 10:46 AM	#80
BBC Motorhead Registered User Join Date: Nov 2010 Location: Bismarck North Dakota Posts: 71	Re: Restored Auto Tilt Column Just wondering what you have available at the moment? Thanks

04-30-2012, 09:59 PM	#82
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Restored Auto Tilt Column ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-01-2012, 04:28 AM	#83
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	Re: Restored Auto Tilt Column Hey buddy, Just wanted to check in and say hi. I recognized that building you worked on right away.Awesome structure. When I go to Cincy to see Reds games it is next to the Roebling Bridge which was designed by Roebling before he did the Brooklyn bridge. (I trust my bed supports are still safe. I promise to get over to you on my way to Cincy for a game)

05-01-2012, 10:21 PM	#85
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 397	Re: Restored Auto Tilt Column Payment sent on Truck Tilt. Thanks Duane

05-01-2012, 10:36 PM	#87
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 397	Re: Restored Auto Tilt Column Step by step on restore process would be a cool thread.

05-01-2012, 11:03 PM	#89
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 397	Re: Restored Auto Tilt Column I bet. That is why I leave it to the pros!

06-03-2012, 07:32 PM	#90
big d's red67 Registered User Join Date: May 2010 Location: Broken Arrow Okla. Posts: 510	Re: Restored Auto Tilt Column do I have this right, you do not move the NNS to the truck location when you rebuild a van column to put in a truck? __________________ 1967 swb 454 cid 700R4 trans SOLD 2006 Chevy Trailblazer SS 2013 Camaro RS convertible the wife's Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=573248



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.