Arkansas K10 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

underliner6 · 02-26-2020, 09:23 PM

Wow that’s clean. Nice work so far!

**Richard** · 03-06-2020, 05:06 AM

Nice work! Always admired those that had the tenacity to go the 100% totally stock restoration path.

**davischevy** · 03-06-2020, 11:50 PM

I had a busy week but I got a few pieces bolted on.

KMC3420 · 03-07-2020, 11:01 PM

Looking awesome!! I applaud you taking the time to install every piece, like new, and keeping it all clean. Gonna be a nice one.

**davischevy** · 03-11-2020, 09:12 PM

I picked up two loads of sheet metal from the hydro blaster yesterday and today. The last load is still in the trailer. My son in laws K10
Suburban parts are in there too.

**Ol Blue K20** · 03-11-2020, 09:27 PM

That's gonna be one nice truck!

**davischevy** · 03-11-2020, 09:36 PM

Quote:

Originally Posted by Ol Blue K20

That's gonna be one nice truck!

I'm ready to hear it run again. I ordered a radiator yesterday.

**davischevy** · 03-11-2020, 09:40 PM

Quote:

Originally Posted by DeadheadNM

Nice! Did you make use of anti squeak pads on the springs?

The original Teflon was still in place so I re-used it.

**davischevy** · 03-23-2020, 10:11 PM

I got back on the K10. I got the fenders sanded today. No rust at all under the battery.

**davischevy** · 07-02-2020, 09:22 PM

We got the kids pool finished, the wife's garden is producing, the 55 is in paint jail, so I finally got back on the K10 this week. I painted two different air cleaners, multiple times and still don't have one I am satisfied with. I'll be out next week, so it will probably still look like this 10 days from now.

**IronCanine** · 07-02-2020, 10:24 PM

Looking good my friend. l can respect a man who goes for max belts.

**davischevy** · 07-02-2020, 10:44 PM

Quote:

Originally Posted by IronCanine

Looking good my friend. l can respect a man who goes for max belts.

I've got to go back to Quanta and order more belts. It was a shot in the dark and I missed on two.

I have the core support powder coated and a couple of radiators, new and rebuilt, ready, fan and clutch restored, and I am going to start the engine when I get those set in place.

57taskforce · 07-02-2020, 11:18 PM

Nice work. I have a lot of admiration for guys like you, Pete, and Iron Canine that kill these kill it on these kinds of builds. Maybe one day at a different stage of life I’ll have the time to pull one off like this.

**DeadheadNM** · 07-03-2020, 08:26 AM

Glad you are keeping the AIR equipment - I thought I was flying solo in the folly of doing so

**davischevy** · 07-03-2020, 11:27 AM

Quote:

Originally Posted by DeadheadNM

Glad you are keeping the AIR equipment - I thought I was flying solo in the folly of doing so

It's been a few years since I did a correct restoration. I kept the A.I.R. for posterity, and it only takes like 1/10 of a horsepower away.

LOL, my dad bought a new 68 C10 with A.I.R., and traded it for a new 69 because he could get the 69 without A.I.R..

Of course I am taking some liberties from the SPID, such as tilt column, AM/FM and extreme bend hooks. I cheated with the dual exhaust, 3 point harness and I may add cruise control just because I have one.

**davischevy** · 08-09-2020, 12:30 PM

I'm headed out to meet an old friend about painting the K10. Fingers crossed.

**Richard** · 08-11-2020, 02:01 AM

Wish you luck. Hope it goes well. Getting completes done where I am is very difficult. No one wants to do them.

**davischevy** · 08-12-2020, 11:14 AM

Well that fell through, sort of. My 55 210 has been in paint jail for a couple of months. My friend wants to do it instead. I will take what I can get.

The shop the 55 is at, indicated they would rather do the truck anyway.

FWIW, I am creating a backup plan for painting the truck. I have a shop I have been using for storage. It is set up for air and has water. I just need to install a compressor and I will paint the truck myself.

Oh yeah, I need a refrigerator for beer.

**DeadheadNM** · 08-12-2020, 11:27 AM

Go for it!

57taskforce · 08-12-2020, 12:20 PM

Nice plan Larry, I’m confident you’ll get them both looking great!

**72 tigger** · 08-12-2020, 12:47 PM

So, you painting the truck is the backup plan if the shop falls through

**Ol Blue K20** · 08-14-2020, 09:55 AM

The fridge is a must have item.....I think your plan sounds great.

**davischevy** · 08-17-2020, 10:01 PM

Let's say the plan for paint is fluid.

The owner of the shop that has been doing my paint for the last several years is encouraging me to use their shop and paint the truck.

My 55 goes out there tomorrow. My friend that came in from NC to paint the 55 is starting on it tomorrow in that shop.

**davischevy** · 08-17-2020, 10:05 PM

The sheet metal on this truck is pretty doggone nice.

Notice the mismatch in the rocker.

**IronCanine** · 08-17-2020, 10:22 PM

That metal is sick Larry...you devil. Good luck on the musical paint booths. Don't let this truck get locked up though. I am anxious to see it done!!!

02-26-2020, 09:23 PM	#76
underliner6 Registered User Join Date: Oct 2013 Location: Montrose, CO Posts: 328	Re: Arkansas K10 Wow that’s clean. Nice work so far! __________________ Jim 1972 K20 Cheyenne- 350/350/205 1972 K20 Cheyenne - 350/SM465/205

03-06-2020, 05:06 AM	#77
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,858	Re: Arkansas K10 Nice work! Always admired those that had the tenacity to go the 100% totally stock restoration path. __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

03-06-2020, 11:50 PM	#78
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: Arkansas K10 I had a busy week but I got a few pieces bolted on. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-07-2020, 11:01 PM	#79
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,069	Re: Arkansas K10 Looking awesome!! I applaud you taking the time to install every piece, like new, and keeping it all clean. Gonna be a nice one. __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green

03-11-2020, 09:12 PM	#80
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: Arkansas K10 I picked up two loads of sheet metal from the hydro blaster yesterday and today. The last load is still in the trailer. My son in laws K10 Suburban parts are in there too. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-11-2020, 09:27 PM	#81
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: Arkansas K10 That's gonna be one nice truck! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

03-23-2020, 10:11 PM	#84
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: Arkansas K10 I got back on the K10. I got the fenders sanded today. No rust at all under the battery. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. Last edited by davischevy; 03-23-2020 at 10:19 PM.

07-02-2020, 09:22 PM	#85
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: Arkansas K10 We got the kids pool finished, the wife's garden is producing, the 55 is in paint jail, so I finally got back on the K10 this week. I painted two different air cleaners, multiple times and still don't have one I am satisfied with. I'll be out next week, so it will probably still look like this 10 days from now. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

07-02-2020, 10:24 PM	#86
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,713	Re: Arkansas K10 Looking good my friend. l can respect a man who goes for max belts. __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

07-02-2020, 11:18 PM	#88
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,454	Re: Arkansas K10 Nice work. I have a lot of admiration for guys like you, Pete, and Iron Canine that kill these kill it on these kinds of builds. Maybe one day at a different stage of life I’ll have the time to pull one off like this. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

07-03-2020, 08:26 AM	#89
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,428	Re: Arkansas K10 Glad you are keeping the AIR equipment - I thought I was flying solo in the folly of doing so __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-09-2020, 12:30 PM	#91
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: Arkansas K10 I'm headed out to meet an old friend about painting the K10. Fingers crossed. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

08-11-2020, 02:01 AM	#92
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,858	Re: Arkansas K10 Wish you luck. Hope it goes well. Getting completes done where I am is very difficult. No one wants to do them. __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

08-12-2020, 11:14 AM	#93
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: Arkansas K10 Well that fell through, sort of. My 55 210 has been in paint jail for a couple of months. My friend wants to do it instead. I will take what I can get. The shop the 55 is at, indicated they would rather do the truck anyway. FWIW, I am creating a backup plan for painting the truck. I have a shop I have been using for storage. It is set up for air and has water. I just need to install a compressor and I will paint the truck myself. Oh yeah, I need a refrigerator for beer. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

08-12-2020, 11:27 AM	#94
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,428	Re: Arkansas K10 Go for it! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

08-12-2020, 12:20 PM	#95
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,454	Re: Arkansas K10 Nice plan Larry, I’m confident you’ll get them both looking great! __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

08-12-2020, 12:47 PM	#96
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,240	Re: Arkansas K10 So, you painting the truck is the backup plan if the shop falls through __________________ 71 C10 72 K20 72 K10 Super Kirk

08-14-2020, 09:55 AM	#97
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: Arkansas K10 The fridge is a must have item.....I think your plan sounds great. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

08-17-2020, 10:01 PM	#98
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: Arkansas K10 Let's say the plan for paint is fluid. The owner of the shop that has been doing my paint for the last several years is encouraging me to use their shop and paint the truck. My 55 goes out there tomorrow. My friend that came in from NC to paint the 55 is starting on it tomorrow in that shop. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

08-17-2020, 10:05 PM	#99
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: Arkansas K10 The sheet metal on this truck is pretty doggone nice. Notice the mismatch in the rocker. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

08-17-2020, 10:22 PM	#100
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,713	Re: Arkansas K10 That metal is sick Larry...you devil. Good luck on the musical paint booths. Don't let this truck get locked up though. I am anxious to see it done!!! __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

Register or Log In To remove these advertisements.