WA Parting out 1971 Custom/20 Deluxe 2wd - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 08-01-2016, 12:25 PM

Quote:

Originally Posted by 68 big block

?????

Thanks for the reminder on your offer, sorry I have been busy trying to keep up with replies...yes your offer is good and the parts are the same. City and zip for shipping quote?

*randy500* · 08-01-2016, 12:32 PM

Quote:

Originally Posted by mrweld

interested in the power steering and power brake parts. I have a 67 c-10 will everything bolt right up and is everything there I need to convert my truck? If so quote shipping to tennessee 37303

You can make the power steering fit the 67...but the frame does not have clearance for the sector shaft "bump" in the side of the steering gear housing...I have made this clearance with a torch and a large hammer, it's not a difficult job, when I did this I changed over to disc brakes as I think the 67 center link has a different size taper where the pitman arm connects.

Booster, from what I recall the booster bolts up and I think the master cylinder and lines on your system are compatible, the drum/drum non power proportioning valve is said to be different inside.

Can anybody else chime in here?

*randy500* · 08-01-2016, 12:37 PM

Quote:

Originally Posted by OUbesto

Im looking for the two horns from my '70 c-10....got em?

I have the 2 horns with both brackets, bolts and the green horn to horn jumper wire. $30 plus shipping.

*randy500* · 08-01-2016, 12:39 PM

If I haven't replied then please remind me, this and my other ads have kept me real busy...lots of sales and trips to UPS and the post office...thanks for all the sales so far!

mrweld · 08-01-2016, 12:46 PM

Quote:

Originally Posted by randy500

You can make the power steering fit the 67...but the frame does not have clearance for the sector shaft "bump" in the side of the steering gear housing...I have made this clearance with a torch and a large hammer, it's not a difficult job, when I did this I changed over to disc brakes as I think the 67 center link has a different size taper where the pitman arm connects.

Booster, from what I recall the booster bolts up and I think the master cylinder and lines on your system are compatible, the drum/drum non power proportioning valve is said to be different inside.

Can anybody else chime in here?

I have already converted to disc brakes, will use my master and proportion valve and modifying frame is no problem. Price??

*randy500* · 08-01-2016, 12:52 PM

Quote:

Originally Posted by mrweld

I have already converted to disc brakes, will use my master and proportion valve and modifying frame is no problem. Price??

Package price because I want this sold...
PS Pump, lines, gearbox and engine lower pulley. This includes all the bolts to install.
Booster, complete with linkage, rod to pedal, bolts nuts and reinforcement brackets, you can have the master cyl and prop valve to if you want it.
All for $200 plus shipping

mrweld · 08-01-2016, 01:06 PM

Quote:

Originally Posted by randy500

Package price because I want this sold...
PS Pump, lines, gearbox and engine lower pulley. This includes all the bolts to install.
Booster, complete with linkage, rod to pedal, bolts nuts and reinforcement brackets, you can have the master cyl and prop valve to if you want it.
All for $200 plus shipping

Ill take it, PM sent

OUbesto · 08-01-2016, 01:20 PM

Randy500, do both horns work? If so, $25 for both shipped to 60069?

*randy500* · 08-01-2016, 01:33 PM

Quote:

Originally Posted by OUbesto

Randy500, do both horns work? If so, $25 for both shipped to 60069?

I can do $25 plus shipping and I will go out and pull them and test them. Send me your city and zip for an accurate shipping quote.

OUbesto · 08-01-2016, 01:35 PM

Thanks for testing them. Lincolnshire, IL 60069 for shipping quote.

*randy500* · 08-01-2016, 03:04 PM

Quote:

Originally Posted by OUbesto

Thanks for testing them. Lincolnshire, IL 60069 for shipping quote.

Took those horns off...neither one worked...never seen that before!

OUbesto · 08-01-2016, 03:09 PM

ha! Thanks for testing...

*randy500* · 08-05-2016, 01:50 AM

Lots of parts left, let me know what you need.

**gmc 2500 4x4** · 08-05-2016, 06:55 AM

Block Ball stud and bracket $25

Z-Bar 30.00 if its for BB . also i need the rag joint if its available zip 14063

*randy500* · 08-05-2016, 04:24 PM

All of that is sold, sorry
Posted via Mobile Device

*randy500* · 08-09-2016, 01:59 AM

ttt

projectking · 08-09-2016, 05:51 AM

How much would the booster/master stuff be with shipping to 60462?

*randy500* · 08-09-2016, 10:41 AM

Quote:

Originally Posted by projectking

How much would the booster/master stuff be with shipping to 60462?

Booster is sold, I still have the master cylinder and proportioning vale if needed.

projectking · 08-09-2016, 10:49 AM

How much? Bracket gone too I assume?

*randy500* · 08-09-2016, 10:52 AM

Quote:

Originally Posted by projectking

How much? Bracket gone too I assume?

The bracket behind it that goes to the pedal assy is gone. I have a couple lower braces, not sure of the fitment on those.

Master with lines to prop valve and valve, $25 plus shipping.

projectking · 08-09-2016, 11:03 AM

I'll try to find everything together if possible......would you be willing to hold it for 24 hrs? If I can't find anything I'll take it and buy a new booster.

*randy500* · 08-09-2016, 11:07 AM

Quote:

Originally Posted by projectking

I'll try to find everything together if possible......would you be willing to hold it for 24 hrs? If I can't find anything I'll take it and buy a new booster.

I will hold it for you.

projectking · 08-09-2016, 11:08 AM

Thank you, I'll post back as soon as I can.

projectking · 08-10-2016, 04:15 PM

Thinking to go with a new booster/master. Would you be willing send the lines and valve?

*randy500* · 08-10-2016, 04:50 PM

Same price, $25 plus shipping

08-01-2016, 12:39 PM	#79
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Parting out 1971 Custom/20 Deluxe 2wd If I haven't replied then please remind me, this and my other ads have kept me real busy...lots of sales and trips to UPS and the post office...thanks for all the sales so far!

08-01-2016, 01:20 PM	#83
OUbesto Registered User Join Date: Oct 2015 Location: Lincolnshire, IL / Burlington, WI Posts: 209	Re: Parting out 1971 Custom/20 Deluxe 2wd Randy500, do both horns work? If so, $25 for both shipped to 60069? __________________ 1970 C-10 CST, LWB, 402/400, A/C

08-01-2016, 01:35 PM	#85
OUbesto Registered User Join Date: Oct 2015 Location: Lincolnshire, IL / Burlington, WI Posts: 209	Re: Parting out 1971 Custom/20 Deluxe 2wd Thanks for testing them. Lincolnshire, IL 60069 for shipping quote. __________________ 1970 C-10 CST, LWB, 402/400, A/C

08-01-2016, 03:09 PM	#87
OUbesto Registered User Join Date: Oct 2015 Location: Lincolnshire, IL / Burlington, WI Posts: 209	Re: Parting out 1971 Custom/20 Deluxe 2wd ha! Thanks for testing... __________________ 1970 C-10 CST, LWB, 402/400, A/C

08-05-2016, 01:50 AM	#88
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Parting out 1971 Custom/20 Deluxe 2wd Lots of parts left, let me know what you need.

08-05-2016, 06:55 AM	#89
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,897	Re: Parting out 1971 Custom/20 Deluxe 2wd Block Ball stud and bracket $25 Z-Bar 30.00 if its for BB . also i need the rag joint if its available zip 14063 Last edited by gmc 2500 4x4; 08-05-2016 at 07:01 AM.

08-05-2016, 04:24 PM	#90
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Parting out 1971 Custom/20 Deluxe 2wd All of that is sold, sorry Posted via Mobile Device

08-09-2016, 01:59 AM	#91
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Parting out 1971 Custom/20 Deluxe 2wd ttt

08-09-2016, 05:51 AM	#92
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting out 1971 Custom/20 Deluxe 2wd How much would the booster/master stuff be with shipping to 60462? __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

08-09-2016, 10:49 AM	#94
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting out 1971 Custom/20 Deluxe 2wd How much? Bracket gone too I assume? __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

08-09-2016, 11:03 AM	#96
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting out 1971 Custom/20 Deluxe 2wd I'll try to find everything together if possible......would you be willing to hold it for 24 hrs? If I can't find anything I'll take it and buy a new booster. __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

08-09-2016, 11:08 AM	#98
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting out 1971 Custom/20 Deluxe 2wd Thank you, I'll post back as soon as I can. __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

08-10-2016, 04:15 PM	#99
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting out 1971 Custom/20 Deluxe 2wd Thinking to go with a new booster/master. Would you be willing send the lines and valve? __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

08-10-2016, 04:50 PM	#100
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Parting out 1971 Custom/20 Deluxe 2wd Same price, $25 plus shipping



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.