IA New Complete Oil Pressure Line - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 11-02-2021, 08:05 PM

Quote:

Originally Posted by 68PanelTruck

Any oil lines left for a 396? I need one and can pay pal you.

I can't think off the top of my head where the oil line port is on a 396. Same as small block or same as 454?

Either way I have one I just need to be sure of the length.

Thanks,
LockDoc

68PanelTruck · 11-02-2021, 08:24 PM

Quote:

Originally Posted by LockDoc

I can't think off the top of my head where the oil line port is on a 396. Same as small block or same as 454?

Either way I have one I just need to be sure of the length.

Thanks,
LockDoc

The line port is in the same place as the BBC that you have a pic of in the #1 post in this thread.

**LockDoc** · 11-02-2021, 08:26 PM

Quote:

Originally Posted by 68PanelTruck

The line port is in the same place as the BBC that you have a pic of in the #1 post in this thread.

OK, PM incoming.

Thanks,
LockDoc

68PanelTruck · 11-05-2021, 11:38 PM

Got it in the mail today. Thanks Leon! It took about 5 min. to install the new line. My old one was steel and made with two pieces joined by a union. Rusted through and was leaking. I like that the new line is copper. Easier to bend. I'll include a couple pics of where the line port is on my 68 396:

**LockDoc** · 11-05-2021, 11:52 PM

Quote:

Originally Posted by 68PanelTruck

Got it in the mail today. Thanks Leon! It took about 5 min. to install the new line. My old one was steel and made with two pieces joined by a union. Rusted through and was leaking. I like that the new line is copper. Easier to bend. I'll include a couple pics of where the line port is on my 68 396:

Good deal! Thanks for the follow up.

LockDoc

**HIGHWAY BY THE SEA** · 12-24-2021, 04:58 PM

I want one of these for my SB 350.

**LockDoc** · 12-24-2021, 11:42 PM

Quote:

Originally Posted by HIGHWAY BY THE SEA

I want one of these for my SB 350.

PM sent

Thanks,
LockDoc

**Curtb1971** · 12-25-2021, 02:51 AM

Leon, sign me up for two big block set ups. No rush on my end and Merry Christmas

**LockDoc** · 12-25-2021, 12:08 PM

Quote:

Originally Posted by Curtb1971

Leon, sign me up for two big block set ups. No rush on my end and Merry Christmas

I will check here in a minute and see what I have left.

Thanks,
LockDoc

**LockDoc** · 12-26-2021, 11:44 PM

Quote:

Originally Posted by Curtb1971

Leon, sign me up for two big block set ups. No rush on my end and Merry Christmas

PM sent with info.

Thanks.
LockDoc

**LockDoc** · 12-27-2021, 12:30 AM

Quote:

Originally Posted by HIGHWAY BY THE SEA

I want one of these for my SB 350.

Quote:

Originally Posted by Curtb1971

Leon, sign me up for two big block set ups. No rush on my end and Merry Christmas

Payments received. I will mail them out tomorrow.

Thanks,
LockDoc

**kev2809** · 01-18-2022, 04:02 PM

hey leon, any SB lines left?

need one for my ls swap. i bought an adapter from amazon, so im assuming one of your lines should work?

**LockDoc** · 01-18-2022, 11:09 PM

Quote:

Originally Posted by kev2809

hey leon, any SB lines left?

need one for my ls swap. i bought an adapter from amazon, so im assuming one of your lines should work?

Yes, it will work if you take the brass fitting out that is now installed in the adapter and use the one that comes with my line. That fitting is for an aftermarket oil line, not a stock type one.

PM sent.

That is all I have for now.

Thanks,
LockDoc

**1rippen6** · 07-11-2022, 07:32 AM

Hello, I need one for a sb if you have any left.

**LockDoc** · 07-11-2022, 10:37 AM

Quote:

Originally Posted by 1rippen6

Hello, I need one for a sb if you have any left.

I don't have any 1/8" OD copper tubing left and I haven't been able to find any at a reasonable price.

Someone said to try a shop that works on big trucks. I guess they use that stuff for different things on trucks.

Sorry,
Leon

**cjnelson654** · 07-01-2023, 09:33 PM

I really need one of these for my 72 chevy c20!! Small block 350

Rich72C10 · 07-02-2023, 07:59 AM

Is this the right stuff, granted it is 50 feet! Perhaps if you supply the line to Leon (assuming the below is correct), he'll put it all together with fittings.

1/8" OD x 50' Copper Refrigeration Tubing Coil

Edit
Amazon - this is 2 meters $7.59
Quickun Copper Tube 1/12" ID × 1/8" OD (2-3mm) Seamless Round Pipe Tubing (6.56FT)

**LockDoc** · 07-03-2023, 11:41 AM

-

Quote:

Originally Posted by cjnelson654

I really need one of these for my 72 chevy c20!! Small block 350

Quote:

Originally Posted by Rich72C10

Is this the right stuff, granted it is 50 feet! Perhaps if you supply the line to Leon (assuming the below is correct), he'll put it all together with fittings.

-
I have some tubing ordered and it should be here in a couple of days.

LockDoc

**LockDoc** · 07-07-2023, 11:57 PM

-
Copper tubing arrived, so I have oil pressure lines available again.....

Thanks,
LockDoc

**72 paul** · 07-08-2023, 08:17 AM

Leon,will take for sb.Post off mo.Paul...

**LockDoc** · 07-08-2023, 09:21 AM

Quote:

Originally Posted by 72 paul

Leon,will take for sb.Post off mo.Paul...

I will send a PM shortly.

Thanks,
LockDoc

**72 paul** · 07-08-2023, 09:59 AM

Thanks Leon.

**72 paul** · 07-15-2023, 09:20 AM

To top for ya Leon,got mine..Thanks. Paul....

**dave6672** · 07-15-2023, 10:18 AM

Leon, I’ll take one for a 72 K20 with a 350. I can pay with PayPal. Thanks

**LockDoc** · 07-15-2023, 01:34 PM

Quote:

Originally Posted by dave6672

Leon, I’ll take one for a 72 K20 with a 350. I can pay with PayPal. Thanks

PM sent.

Thanks,
LockDoc

11-05-2021, 11:38 PM	#79
68PanelTruck Registered User Join Date: Aug 2020 Location: Frankfort, Ill Posts: 143	Re: New Complete Oil Pressure Line Got it in the mail today. Thanks Leon! It took about 5 min. to install the new line. My old one was steel and made with two pieces joined by a union. Rusted through and was leaking. I like that the new line is copper. Easier to bend. I'll include a couple pics of where the line port is on my 68 396: Attached Images __________________ It's not rust, it's called patina Trying to bring a 68 Panel Truck back from the dead. 396 Big Block, 4 on the floor, and a whole lot of rust.

12-24-2021, 04:58 PM	#81
HIGHWAY BY THE SEA Senior Member Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 922	Re: New Complete Oil Pressure Line I want one of these for my SB 350. __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion

12-25-2021, 02:51 AM	#83
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: New Complete Oil Pressure Line Leon, sign me up for two big block set ups. No rush on my end and Merry Christmas __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

01-18-2022, 04:02 PM	#87
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: New Complete Oil Pressure Line hey leon, any SB lines left? need one for my ls swap. i bought an adapter from amazon, so im assuming one of your lines should work? Attached Images __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

07-11-2022, 07:32 AM	#89
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: New Complete Oil Pressure Line Hello, I need one for a sb if you have any left.

07-01-2023, 09:33 PM	#91
cjnelson654 Registered User Join Date: Oct 2022 Location: MISSOULA, Montana Posts: 4	Re: New Complete Oil Pressure Line I really need one of these for my 72 chevy c20!! Small block 350

07-02-2023, 07:59 AM	#92
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: New Complete Oil Pressure Line Is this the right stuff, granted it is 50 feet! Perhaps if you supply the line to Leon (assuming the below is correct), he'll put it all together with fittings. 1/8" OD x 50' Copper Refrigeration Tubing Coil Edit Amazon - this is 2 meters $7.59 Quickun Copper Tube 1/12" ID × 1/8" OD (2-3mm) Seamless Round Pipe Tubing (6.56FT) __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| Upgraded Fully Super Trim Last edited by Rich72C10; 07-02-2023 at 08:05 AM.*

07-07-2023, 11:57 PM	#94
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,770	Re: New Complete Oil Pressure Line - Copper tubing arrived, so I have oil pressure lines available again..... Thanks, LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

07-08-2023, 08:17 AM	#95
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 499	Re: New Complete Oil Pressure Line Leon,will take for sb.Post off mo.Paul...

07-08-2023, 09:59 AM	#97
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 499	Re: New Complete Oil Pressure Line Thanks Leon.

07-15-2023, 09:20 AM	#98
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 499	Re: New Complete Oil Pressure Line To top for ya Leon,got mine..Thanks. Paul....

07-15-2023, 10:18 AM	#99
dave6672 Senior Member Join Date: Jul 2008 Location: Carrollton, KY Posts: 1,263	Re: New Complete Oil Pressure Line Leon, I’ll take one for a 72 K20 with a 350. I can pay with PayPal. Thanks __________________ Dave R. 1972 K20 1972 C20 Highlander 1967 C10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.