IA New Complete Oil Pressure Line - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 06-05-2019, 09:15 PM

-
This is a new complete oil pressure line for the Chevy and GMC trucks. I can make them for the Chevy small block V-8, Big Block V-8, & 6 cylinder engines. This would include the copper line, the brass adapter fitting that screws into the block, and the two brass compression sleeve nuts. One of the sleeve nuts screws into the back of the oil pressure gauge and one screws into the block adapter fitting. The line is 38” long for any SB V-8 application and 50" long for the Big Blocks and 6 Cyl applications. I have set the fitting on one end of the tube and you can use that end for the gauge or the block fitting, whichever you prefer. When shipped it will be attached to the block adapter fitting.

Installation instructions and tips are located at the link below..

http://67-72chevytrucks.com/vboard/s...d.php?t=613238

This is a link to information about the Big Block connection location and the extra adapter needed if your block doesn't have it.

http://67-72chevytrucks.com/vboard/s...d.php?t=638710

The complete SB line kit is $16.50 shipped, in a padded envelope. The Big Block and 6 Cylinder lines are $2.00 more because they have to be longer and the postage is more....

PayPal, Money Order, or check works for me.

Per board rules post in thread before any PM’s

(If this is down quite a few pages send me a PM after posting in the thread)

Thanks,
LockDoc

**BlueBoy72** · 07-13-2019, 03:13 PM

I will take one for a BB if make up some more.
Send PM .
Thanks.

**mkmc69** · 07-13-2019, 03:46 PM

I will take one for a BB, and one for a 6 CYL when you get more made up. Just send me a PM.

Thank you,
Mike

**BlueBoy72** · 07-14-2019, 12:55 AM

Paypal sent.
Thanks.

**BlueBoy72** · 07-17-2019, 05:41 PM

Received my oil pressure line today.
Very nice workmanship as usual.
Thanks.

**Eagle9502** · 07-17-2019, 05:47 PM

Doc, I’d like 2 small block lines (both 4x4 if it matters), and one big block line when you have enough to ship all three. No rush. Thanks

**LockDoc** · 07-17-2019, 10:04 PM

Quote:

Originally Posted by BlueBoy72

Received my oil pressure line today.
Very nice workmanship as usual.
Thanks.

Thanks for letting me know it arrived OK. I don't know if you saw the bending instructions link in my first post or not. Here it is again.

http://67-72chevytrucks.com/vboard/s...d.php?t=613238

It would be different on the lower half but the top part and coils would be pretty much the same.

Quote:

Originally Posted by Eagle9502

Doc, I’d like 2 small block lines (both 4x4 if it matters), and one big block line when you have enough to ship all three. No rush. Thanks

I will put you on the list.

Thanks,
LockDoc

**LockDoc** · 08-05-2019, 03:46 PM

Quote:

Originally Posted by mkmc69

I will take one for a BB, and one for a 6 CYL when you get more made up. Just send me a PM.

Thank you,
Mike

Quote:

Originally Posted by Eagle9502

Doc, I’d like 2 small block lines (both 4x4 if it matters), and one big block line when you have enough to ship all three. No rush. Thanks

I have more oil lines on hand. PM's sent

Thanks,
LockDoc

**Eagle9502** · 08-06-2019, 07:56 AM

PM sent. Thanks

**mkmc69** · 08-06-2019, 09:20 AM

Payment sent, PM replied to.

CanukBlueTruck · 08-27-2019, 12:45 AM

I'll take one for a 6 cylinder if you have this still available. Can you please let me know what shipping would be to Canada please? I'll send you a PM.
Thanks

**71K5Randy** · 08-27-2019, 11:00 AM

I’d like one for small block if available.
Thanks

**LockDoc** · 08-27-2019, 11:15 PM

Quote:

Originally Posted by CanukBlueTruck

I'll take one for a 6 cylinder if you have this still available. Can you please let me know what shipping would be to Canada please? I'll send you a PM.
Thanks

Quote:

Originally Posted by 71K5Randy

I’d like one for small block if available.
Thanks

PM's sent.

Thanks,
LockDoc

**71K5Randy** · 08-27-2019, 11:45 PM

Quote:

Originally Posted by 71K5Randy

I’d like one for small block if available.
Thanks

Payment sent.

mpreese811 · 09-18-2019, 11:27 AM

I will take a kit for a BB if you still have them available.

**LockDoc** · 09-18-2019, 02:22 PM

Quote:

Originally Posted by mpreese811

I will take a kit for a BB if you still have them available.

PM sent.

Thanks,
LockDoc

mpreese811 · 09-18-2019, 05:24 PM

Quote:

Originally Posted by LockDoc

PM sent.

Thanks,
LockDoc

Payment sent,

Thanks

projectking · 04-11-2020, 09:17 AM

Leon, I need one if you’re still offering these?

**LockDoc** · 04-11-2020, 02:06 PM

Quote:

Originally Posted by projectking

Leon, I need one if you’re still offering these?

Yes I am. Sending PM.

Thanks,
LockDoc

C0UCH · 04-12-2020, 09:02 PM

Leon,

I’m interested as well in one of these for my 67. I’ve got a 305 with a plug for mine next to the distributor on the drivers side.

-Kenny

**LockDoc** · 04-12-2020, 11:54 PM

Quote:

Originally Posted by C0UCH

Leon,

I’m interested as well in one of these for my 67. I’ve got a 305 with a plug for mine next to the distributor on the drivers side.

-Kenny

That would be the correct location for the fitting. PM sent.

Thanks,
LockDoc

MattyBs71 · 04-13-2020, 12:10 AM

Hi Leon!
I would like a V8 kit and an I6 kit. PM me total and I will PayPal. Thanks sir!

**LockDoc** · 04-13-2020, 09:43 AM

Quote:

Originally Posted by MattyBs71

Hi Leon!
I would like a V8 kit and an I6 kit. PM me total and I will PayPal. Thanks sir!

PM sent.

Thanks,
LockDoc

69Tom · 04-13-2020, 12:56 PM

PM sent

**LockDoc** · 04-13-2020, 02:01 PM

Quote:

Originally Posted by 69Tom

PM sent

PM returned.

Thanks,
LockDoc

06-05-2019, 09:15 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,770	New Complete Oil Pressure Line - This is a new complete oil pressure line for the Chevy and GMC trucks. I can make them for the Chevy small block V-8, Big Block V-8, & 6 cylinder engines. This would include the copper line, the brass adapter fitting that screws into the block, and the two brass compression sleeve nuts. One of the sleeve nuts screws into the back of the oil pressure gauge and one screws into the block adapter fitting. The line is 38” long for any SB V-8 application and 50" long for the Big Blocks and 6 Cyl applications. I have set the fitting on one end of the tube and you can use that end for the gauge or the block fitting, whichever you prefer. When shipped it will be attached to the block adapter fitting. Installation instructions and tips are located at the link below.. http://67-72chevytrucks.com/vboard/s...d.php?t=613238 This is a link to information about the Big Block connection location and the extra adapter needed if your block doesn't have it. http://67-72chevytrucks.com/vboard/s...d.php?t=638710 The complete SB line kit is $16.50 shipped, in a padded envelope. The Big Block and 6 Cylinder lines are $2.00 more because they have to be longer and the postage is more.... PayPal, Money Order, or check works for me. Per board rules post in thread before any PM’s (If this is down quite a few pages send me a PM after posting in the thread) Thanks, LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 12-18-2023 at 01:48 AM.

07-13-2019, 03:13 PM	#2
BlueBoy72 Active Member Join Date: Feb 2017 Location: Las Cruces,New Mexico Posts: 288	Re: New Complete Oil Pressure Line I will take one for a BB if make up some more. Send PM . Thanks. Last edited by BlueBoy72; 07-13-2019 at 10:36 PM.

07-13-2019, 03:46 PM	#3
mkmc69 Senior Member Join Date: Jan 2009 Location: Logansport,In Posts: 561	Re: New Complete Oil Pressure Line I will take one for a BB, and one for a 6 CYL when you get more made up. Just send me a PM. Thank you, Mike

07-14-2019, 12:55 AM	#4
BlueBoy72 Active Member Join Date: Feb 2017 Location: Las Cruces,New Mexico Posts: 288	Re: New Complete Oil Pressure Line Paypal sent. Thanks.

07-17-2019, 05:41 PM	#5
BlueBoy72 Active Member Join Date: Feb 2017 Location: Las Cruces,New Mexico Posts: 288	Re: New Complete Oil Pressure Line Received my oil pressure line today. Very nice workmanship as usual. Thanks.

07-17-2019, 05:47 PM	#6
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 838	Re: New Complete Oil Pressure Line Doc, I’d like 2 small block lines (both 4x4 if it matters), and one big block line when you have enough to ship all three. No rush. Thanks

08-06-2019, 07:56 AM	#9
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 838	Re: New Complete Oil Pressure Line PM sent. Thanks

08-06-2019, 09:20 AM	#10
mkmc69 Senior Member Join Date: Jan 2009 Location: Logansport,In Posts: 561	Re: New Complete Oil Pressure Line Payment sent, PM replied to.

08-27-2019, 12:45 AM	#11
CanukBlueTruck Registered User Join Date: Feb 2019 Location: Manotick, Ontario, Canada Posts: 48	Re: New Complete Oil Pressure Line I'll take one for a 6 cylinder if you have this still available. Can you please let me know what shipping would be to Canada please? I'll send you a PM. Thanks

08-27-2019, 11:00 AM	#12
71K5Randy Senior Member Join Date: Aug 2015 Location: Belleville, IL (St. Louis metro) Posts: 725	Re: New Complete Oil Pressure Line I’d like one for small block if available. Thanks __________________ 71 K5 CST Blazer 350 70 Suburban 350 71 Chevelle SS 454 69 Olds 442 454 (yes, Chevy power!) 68 Camaro RS 327 66 Chevelle SS 396 Members I have met: 62cdan, 60case, daddymoo2, aotte1, 70shortfleet, countr, Cowboy#40, chevy71super, davischevy

09-18-2019, 11:27 AM	#15
mpreese811 Registered User Join Date: Apr 2013 Location: Kansas Posts: 3	Re: New Complete Oil Pressure Line I will take a kit for a BB if you still have them available.

04-11-2020, 09:17 AM	#18
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: New Complete Oil Pressure Line Leon, I need one if you’re still offering these? __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

04-12-2020, 09:02 PM	#20
C0UCH Registered User Join Date: Jun 2012 Location: Anaheim, CA Posts: 455	Re: New Complete Oil Pressure Line Leon, I’m interested as well in one of these for my 67. I’ve got a 305 with a plug for mine next to the distributor on the drivers side. -Kenny

04-13-2020, 12:10 AM	#22
MattyBs71 Registered User Join Date: Apr 2008 Location: Buckley, Washington Posts: 333	Re: New Complete Oil Pressure Line Hi Leon! I would like a V8 kit and an I6 kit. PM me total and I will PayPal. Thanks sir!

04-13-2020, 12:56 PM	#24
69Tom Registered User Join Date: Jul 2015 Location: Phoenix, AZ Posts: 1,335	Re: New Complete Oil Pressure Line PM sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.