1967 C10 Custom Big Window - Page 40 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mattboe91 · 01-09-2011, 12:06 AM

what all did you have to do to mount your front bags did you fab something or did you buy the plates and are those the factory spindle or lowering ones?

powerman324 · 01-09-2011, 12:23 AM

did you have any clearance problems with the wheels and the wheel tubs and what size wheels and tires do you have

Slick67 · 01-09-2011, 01:47 AM

Quote:

Originally Posted by mattboe91

what all did you have to do to mount your front bags did you fab something or did you buy the plates and are those the factory spindle or lowering ones?

I have the plates and that is really all ya need for the front end also Western 2.5 drop spindles to get it down a little more. Oh yeah, I cut about 3/8 of an inch off of the cup and that dropped it another 1.5 inches too.

Quote:

Originally Posted by powerman324

did you have any clearance problems with the wheels and the wheel tubs and what size wheels and tires do you have

No clearance issues on the front with 20X8.5 rims and 35 series tires with the width of your liking. If ya do a 4 link in the rear you will be happier with the outcome. I have a mini-notch too. I am running the factory rear suspension with an adjustable trac-bar with a 70 rear end and still have about 5/8 of an inch clearance with 22X10s with a 35 series tire. The backspacing should be 5.5 on the rear if I am not mistaken cause I am running a spacer on the rear. Here is a pic of the rear clearance airred out.
Name: tireclearance.jpg
Views: 1013
Size: 47.9 KB

Name: tireclearance.jpg
Views: 1013
Size: 47.9 KB

Name: SAM_0088.jpg
Views: 1011
Size: 43.6 KB

powerman324 · 01-09-2011, 04:28 PM

how do you like the rims have you had to replace any of them and are there they very strong rims. i am look at getting a set like yours but i am afraid that 20s and 22s with low profile tires that the rims will bend if you hit a crack on the road

Slick67 · 01-09-2011, 11:28 PM

Quote:

Originally Posted by powerman324

how do you like the rims have you had to replace any of them and are there they very strong rims. i am look at getting a set like yours but i am afraid that 20s and 22s with low profile tires that the rims will bend if you hit a crack on the road

I think they have 1 mile on them at this point. They are solid rims, but I will use these for shows only. I have a set of rallys that I will run when I plan on driving very far, just gotta put some shoes on em.
Name: rallys.jpg
Views: 1146
Size: 24.4 KB

Name: rallys.jpg
Views: 1146
Size: 24.4 KB

67chevy1series · 01-09-2011, 11:41 PM

you should have got some of those 17 or 18 inch rallies they look just like those but bigger there awsome!

powerman324 · 01-10-2011, 12:49 AM

would you suggest 22s front and back

Slick67 · 01-10-2011, 01:15 AM

Quote:

Originally Posted by powerman324

would you suggest 22s front and back

22s in the front n back, especially on a short bed, would look odd.......or like I say, a ghetto hovercraft. If you are going to leave out the innerfenders and try to lay frame then 22s are fine, but I think you are going for a more tasteful, well thought-out look. I prefer the hot rod look with the slightly smaller rim on the front, but you can always compensate with a larger 50 series tire and it will still look correct. JMHO!

powerman324 · 01-11-2011, 05:05 PM

what brand of rims are your 22s and 20s

Slick67 · 01-12-2011, 11:15 AM

Quote:

Originally Posted by powerman324

what brand of rims are your 22s and 20s

BZO Elites.

Slick67 · 01-23-2011, 03:09 AM

Baby's first bath.

Had to wash all of the sandblasting dust off her today, thanks Ronnie for not covering it. It took four washings to get it clean and still need to do the interior and under the hood. Happy to be doing something with the truck! Got a little something exciting in the works, we'll see what happens. Can't let the cat outta the bag yet.
Name: First bath.jpg
Views: 1054
Size: 37.3 KB

Name: First bath.jpg
Views: 1054
Size: 37.3 KB

**kev2809** · 01-23-2011, 10:38 AM

nice man!

you gotta at least drop a little hint!

Jeffs70 · 01-23-2011, 11:12 AM

wow what an amazing job you have done. Great Truck for sure.
I am Jealous. wish I would have went this same rout, rather then dig into mine and customize to much lol.

Slick67 · 01-23-2011, 11:48 AM

Quote:

Originally Posted by kev2809

nice man!

you gotta at least drop a little hint!

It is not set in stone as of yet, so keepin it on the downlow. Don't wanna jinx myself!!!!

Quote:

Originally Posted by Jeffs70

wow what an amazing job you have done. Great Truck for sure.
I am Jealous. wish I would have went this same rout, rather then dig into mine and customize to much lol.

Thanks Jeff!!!! That is a huge compliment! I will promise to finish the ride in the same fashion as I started.....simple!!! We are both lucky, that there are alot of these trucks available and we can always do another one...

VA72C10 · 01-23-2011, 03:57 PM

Quote:

Originally Posted by Slick67

It is not set in stone as of yet, so keepin it on the downlow. Don't wanna jinx myself!!!!

You know better than to tease us like that.....just ask 72BlckButy

72SWBChevy · 01-24-2011, 01:38 PM

"It is not set in stone as of yet, so keepin it on the downlow. Don't wanna jinx myself!!!!""

Keep us in the loop!!!

Slick67 · 01-24-2011, 03:54 PM

Quote:

Originally Posted by 72SWBChevy

"It is not set in stone as of yet, so keepin it on the downlow. Don't wanna jinx myself!!!!""

Keep us in the loop!!!

Trust that I will. Keepin my fingers crossed on this one. Really excited about it.

**67cheby** · 01-24-2011, 04:08 PM

i smell an LS swap..............

Jeffs70 · 01-24-2011, 04:13 PM

hmmm Now I am curious on this one.. Cant wait to see the new surprise that may fall in..

Slick67 · 01-24-2011, 08:40 PM

Quote:

Originally Posted by 67cheby

i smell an LS swap..............

Hahaha, nope! Good guess though! I'm happy with the little 327!

Quote:

Originally Posted by Jeffs70

hmmm Now I am curious on this one.. Cant wait to see the new surprise that may fall in..

I sure hope it falls into place cause it would be great! I've even got my eyes crossed!!

67chevy1series · 01-24-2011, 08:50 PM

Quote:

Originally Posted by Slick67

Hahaha, nope! Good guess though! I'm happy with the little 327!

I sure hope it falls into place cause it would be great! I've even got my eyes crossed!!

327 are BEAST!!!!

Slick67 · 01-24-2011, 08:56 PM

Quote:

Originally Posted by 67chevy1series

327 are BEAST!!!!

Especially those that are about 370 hp. Like mine

.

Name: SAM_0254.jpg
Views: 979
Size: 49.3 KB

67chevy1series · 01-24-2011, 08:59 PM

The engines i like best are a 302 ,283 and 327

Jeffs70 · 01-24-2011, 08:59 PM

Yeah I love the thought you came up with on the breather cover looks great. and

on the 327 love it.

Sonicman · 01-30-2011, 11:15 AM

Awesome bud great work!!!!!
Posted via Mobile Device

01-09-2011, 12:06 AM	#1
mattboe91 Registered User Join Date: Jan 2011 Location: Rogers, MN Posts: 17	Re: 1967 C10 Custom Big Window what all did you have to do to mount your front bags did you fab something or did you buy the plates and are those the factory spindle or lowering ones?

01-09-2011, 12:23 AM	#2
powerman324 Registered User Join Date: Jul 2010 Location: winnipeg Posts: 7	Re: 1967 C10 Custom Big Window did you have any clearance problems with the wheels and the wheel tubs and what size wheels and tires do you have

01-09-2011, 04:28 PM	#4
powerman324 Registered User Join Date: Jul 2010 Location: winnipeg Posts: 7	Re: 1967 C10 Custom Big Window how do you like the rims have you had to replace any of them and are there they very strong rims. i am look at getting a set like yours but i am afraid that 20s and 22s with low profile tires that the rims will bend if you hit a crack on the road Last edited by powerman324; 01-09-2011 at 08:57 PM.

01-09-2011, 11:41 PM	#6
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window you should have got some of those 17 or 18 inch rallies they look just like those but bigger there awsome!

01-10-2011, 12:49 AM	#7
powerman324 Registered User Join Date: Jul 2010 Location: winnipeg Posts: 7	Re: 1967 C10 Custom Big Window would you suggest 22s front and back Last edited by powerman324; 01-10-2011 at 12:51 AM.

01-11-2011, 05:05 PM	#9
powerman324 Registered User Join Date: Jul 2010 Location: winnipeg Posts: 7	Re: 1967 C10 Custom Big Window what brand of rims are your 22s and 20s

01-23-2011, 03:09 AM	#11
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Baby's first bath. Had to wash all of the sandblasting dust off her today, thanks Ronnie for not covering it. It took four washings to get it clean and still need to do the interior and under the hood. Happy to be doing something with the truck! Got a little something exciting in the works, we'll see what happens. Can't let the cat outta the bag yet. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

01-23-2011, 10:38 AM	#12
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: 1967 C10 Custom Big Window nice man! you gotta at least drop a little hint! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-23-2011, 11:12 AM	#13
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: 1967 C10 Custom Big Window wow what an amazing job you have done. Great Truck for sure. I am Jealous. wish I would have went this same rout, rather then dig into mine and customize to much lol.

01-24-2011, 01:38 PM	#16
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: 1967 C10 Custom Big Window "It is not set in stone as of yet, so keepin it on the downlow. Don't wanna jinx myself!!!!"" Keep us in the loop!!! __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

01-24-2011, 04:08 PM	#18
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1967 C10 Custom Big Window i smell an LS swap.............. __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-24-2011, 04:13 PM	#19
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: 1967 C10 Custom Big Window hmmm Now I am curious on this one.. Cant wait to see the new surprise that may fall in.. __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

01-24-2011, 08:59 PM	#23
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window The engines i like best are a 302 ,283 and 327

01-24-2011, 08:59 PM	#24
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: 1967 C10 Custom Big Window Yeah I love the thought you came up with on the breather cover looks great. and on the 327 love it. __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

01-30-2011, 11:15 AM	#25
Sonicman Registered User Join Date: Jul 2010 Location: Denton, TX Posts: 155	Re: 1967 C10 Custom Big Window Awesome bud great work!!!!! Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.