Kabwe's aka Bam's build

[Kabwe]

Originally Posted by oldman3

Really like the way the frame looks, nice job. I agree on welding to frame, one less thing to line up when installing bed for the final time...Jim

Originally Posted by Daze57

lookin good

Originally Posted by Kim57

Nice fab work Bam.
Kim

Thanks guys.

Originally Posted by OrrieG

Looks good. Did the neighbor notice his missing fence post?

LOL. SHHHHH be quiet I don't think he will notice.

[_Ogre]

how are you going to handle the tailgate x-member?
step up at the tailgate?
sort of wish i had raised my bed...

[Kabwe]

Originally Posted by _Ogre

how are you going to handle the tailgate x-member?
step up at the tailgate?
sort of wish i had raised my bed...

The only thing that would be raised is the bed floor. When I move the angle strips up two inches that bed will mount factory but the bed floor will be raised. The last cross sill and tailgate will be in the same spot. There will be a two inch gap when I open the tail gate but I fab something up for cosmetic reason when the time comes.

This is a extreme case, my gap will only be 2 inches but you can get the idea.

[dug224]

Headed in the same direction. Don't understand how the spacers are "not" structural. As usual, nice work...dug

[youngrodder]

Kabwe-

I had a simular gap issue with my raises bed. I just welded in a panel and tied it into my rol pan. When my tailgate is down (which is almost never) it is nice and clean. Just sharing ,I know that you will come up with something slick.


Nice progress.

Marc

[Kabwe]

Originally Posted by dug224

Headed in the same direction. Don't understand how the spacers are "not" structural. As usual, nice work...dug

I may have worded it wrong, what I meant was that bolting it or welding it will not affect the structural integrity thats all. The tubing is 3/16 thick and the washers where added to align with the holes in the frame and to stop any lateral movement and once bolted and sandwiched between the frame and the cross sills it will fine. I still think I going to weld them because I'm known to lose things and its one less thing to lose.lol

Originally Posted by youngrodder

Kabwe-

I had a simular gap issue with my raises bed. I just welded in a panel and tied it into my rol pan. When my tailgate is down (which is almost never) it is nice and clean. Just sharing ,I know that you will come up with something slick.


Nice progress.

Marc

That's exactly what I was going to do. Beautiful truck man.

[VDOG]

Ok im totally lost. But whatelse is new. Now why are you raising your bedfloor, isnt that to lower the bed when using airbags? I know you were doing a static drop and not using big wheels on your truck. So is it a clearence issue with something?

Lost as usual.

[BlueJeep]

I did similar, except I had a new rear sill bent up to my specs, which was then butt-welded to the stake pockets so that I didn't have the overlapping metal (which caused the original stake pockets to rust through).

[Kabwe]

Originally Posted by VDOG

Ok im totally lost. But whatelse is new. Now why are you raising your bedfloor, isnt that to lower the bed when using airbags? I know you were doing a static drop and not using big wheels on your truck. So is it a clearence issue with something?

Lost as usual.

It is correct that you are always lost, but I consider you my hot rodding responsibility. I am your Lieutenant Dan and you are my Forrest Gump so I will explain things clearer so that you may understand Forrest. Remember when I redid my c-notch for more clearance? Well because I did higher c-notches I now have to raise my bed floor 2 inches for clearance or the bed floor will hit the c-notch. Are you caught up now Forrest.lol
Sorry Vdog but I had to.lol

Originally Posted by BlueJeep

I did similar, except I had a new rear sill bent up to my specs, which was then butt-welded to the stake pockets so that I didn't have the overlapping metal (which caused the original stake pockets to rust through).

It looks great man, good job.

[Baldeagle SR]

Bam you mention about a grinding disc that will shrink metal. I have been in a closet for about 20 years. I called the parts house today and they didn't know what I was talking about. Could you tell me what or where I can get one of those disc. Thanls Rich

[Kabwe]

Originally Posted by Baldeagle SR

Bam you mention about a grinding disc that will shrink metal. I have been in a closet for about 20 years. I called the parts house today and they didn't know what I was talking about. Could you tell me what or where I can get one of those disc. Thanls Rich

Its called a skrinking disc. I like the smooth ones you can buy them all day long on ebay. Practice on some scrap metal first. When using it don't use any pressure let the disc do the work.

Jesse49chevy

Your are crazy, hows that truck build going?

[Jesse49chevy]

Me crazy? heck your the comedian!! it was pretty funny though..
the build is coming along, i visited my dad a week or so ago and he is so far ahead on the body, he told me to come pick it up in April as he plans to be done with it.
So that only means one thing, i better put it in gear and finish the chassis.
Ive been working on the rear, installing the leaf springs i bought (Explorer) but im having second thoughts about it, Im tore up between it and a 4 link setup. I dont intend to bag it, i just want a nice mean stance, but really im not to confident on how it will turn out. And the only reason im thinking about the 4 link is because of how it can be adjusted to ensure it is square.
but then again, i have this thing called BUDGET.

[Kabwe]

Originally Posted by Jesse49chevy

Me crazy? heck your the comedian!! it was pretty funny though..
the build is coming along, i visited my dad a week or so ago and he is so far ahead on the body, he told me to come pick it up in April as he plans to be done with it.
So that only means one thing, i better put it in gear and finish the chassis.
Ive been working on the rear, installing the leaf springs i bought (Explorer) but im having second thoughts about it, Im tore up between it and a 4 link setup. I dont intend to bag it, i just want a nice mean stance, but really im not to confident on how it will turn out. And the only reason im thinking about the 4 link is because of how it can be adjusted to ensure it is square.
but then again, i have this thing called BUDGET.

Vdog is my buddy and we just go there with one another, its all in fun.lol

There is nothing wrong with leaf springs. Just go with them now and change it out later if you still want to do that. A flip kit should get you low enough and if not you could always add a lowering block. If you still want a 4 link at a later date, well thats why we say they are never done.lol

[VDOG]

Originally Posted by Kabwe

Vdog is my buddy and we just go there with one another, its all in fun.lol

Lieutenant Dan: I am not a smart man, but I dont know what hotrodding is and its not a box of chocolates. LOL

Bunch of clowns on here. LOL

[Jesse49chevy]

Posted via Mobile Device
Lol.....is it comedy night?
Posted via Mobile Device

[Jesse49chevy]

Posted via Mobile Device
Posted via Mobile Device

[Low Elco]

Sunchaser Tools makes the shrinking disc. You need a big grinder. Works great!
Posted via Mobile Device

[Kabwe]

Well I had a little time today so I decided to go ahead and weld the bed floor spacers to the frame.



Just checking cross sill bolt alignment.


Finished and repainted.

Before I mount the bed I have to move the angle strips up two inches and bed should fit like factory but the floor will be two inches higher.

[hotrod1]

Slick!

[Kim57]

Nice fix.
Kim

[Kabwe]

Originally Posted by hotrod1

Slick!

Originally Posted by Kim57

Nice fix.
Kim

You think? Well I hope so.

Thanks guys.

[oldman3]

Nice job...Jim

[FarmerSid]

I think you did the right thing by welding them to the frame. Keep up the nice work my little grasshopper!

[Kabwe]

Originally Posted by oldman3

Nice job...Jim

Thanks

Originally Posted by FarmerSid

I think you did the right thing by welding them to the frame. Keep up the nice work my little grasshopper!

Looks like someones been watching episodes of Kung fu. Little grasshopper.lol

[mknittle]

Hey Bam,
What did you do for a nut at the lower end of the spacer? I am going to have to do somthing like that on mine. By the way your truck is really looking good!!!