1967 C10 Custom Big Window - Page 46 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slick67 · 02-24-2011, 08:31 PM

Alrighty then, on to the progress pics. I ordered some Hedman Hedders part #68608, they are the mid-length 1967 Camaro/Chevelle headers. Summit had them for the least coin. $333 shipped.
Name: SAM_0817 (800x600).jpg
Views: 1519
Size: 39.0 KB

Name: SAM_0817 (800x600).jpg
Views: 1519
Size: 39.0 KB

I test fitted the passenger side first and they fit perfect and luckily the trans lines that I bent a few months ago turned out to be perfect also, guess I got lucky again.
Name: SAM_0820 (800x600).jpg
Views: 1828
Size: 38.7 KB

Name: SAM_0820 (800x600).jpg
Views: 1828
Size: 38.7 KB

Name: SAM_0821 (800x600).jpg
Views: 1429
Size: 42.5 KB

I didn't get so lucky on the driver side. There is a post that is floating around out there that says these fit perfect on both sides with no mods, that is not really true. You can see the header is high toward the back of the block because it is hitting the motor mount bracket.

Pay no attention to the dust and bondo sanding mess that is everywhere, we are still sanding the 39.
Name: SAM_0822 (800x600).jpg
Views: 1379
Size: 42.7 KB

Name: SAM_0823 (800x600).jpg
Views: 1437
Size: 48.4 KB

Slick67 · 02-24-2011, 08:38 PM

Aggravated, I pulled out the trusty grinder and started throwin sparks. I know it looks like messy grinding.....because it was! I had to cover everything in cardboard which made it difficult to get to.
Name: SAM_0825 (800x600).jpg
Views: 1370
Size: 46.2 KB

Name: SAM_0825 (800x600).jpg
Views: 1370
Size: 46.2 KB

After taking out about half an inch or so, the header dropped into posistion leaving about 1/16th of an inch clearance......good enough for government work!! Promise the next pics will be of a cleaner engine bay!!!
Name: SAM_0827 (800x600).jpg
Views: 1768
Size: 52.7 KB

Name: SAM_0827 (800x600).jpg
Views: 1768
Size: 52.7 KB

Jeffs70 · 02-24-2011, 09:07 PM

the Headers look great, sorry to hear about the fitting problems.

I was planning on getting this same set of headers. I wonder if it would be smart for me to mod my mount tower and flush it out on the top rather then have that hump sitting out there that much where you had to grind

Slick67 · 02-24-2011, 09:18 PM

Quote:

Originally Posted by Jeffs70

the Headers look great, sorry to hear about the fitting problems.

I was planning on getting this same set of headers. I wonder if it would be smart for me to mod my mount tower and flush it out on the top rather then have that hump sitting out there that much where you had to grind

Sounds like your idea would work well and be a cleaner install. These headers look really good and fit great once you get past the motor mount, I would recommend them if you don't mind a little modification.

VA72C10 · 02-24-2011, 09:22 PM

looks good...even though it's sooooooo dirty

Slick67 · 02-24-2011, 09:37 PM

Quote:

Originally Posted by VA72C10

looks good...even though it's sooooooo dirty

I am ashamed.

67chevy1series · 02-24-2011, 10:17 PM

slick it looks awsome! i dont care my engine bay is dusty to

great work and now paint that mount!

Slick67 · 02-25-2011, 12:03 AM

Quote:

Originally Posted by 67chevy1series

slick it looks awsome! i dont care my engine bay is dusty to

great work and now paint that mount!

It's painted, at least I wiped it with alcohol before I did it. Rubbing alcohol.....not the good stuff.

67chevy1series · 02-25-2011, 12:09 AM

slick thats funny! nice job man seriously.

David67 · 02-25-2011, 12:11 AM

wow those look slick! basketball seasons over so i have time to actually work on my truck now. counting down the days till April 2nd!

Slick67 · 02-25-2011, 12:19 AM

Quote:

Originally Posted by David67

wow those look slick! basketball seasons over so i have time to actually work on my truck now. counting down the days till April 2nd!

Thanks David, it'll be good to see some more progress on your truck it's super clean. April is creepin up quick and I am hoping to have mine almost complete.

68 Quad C10 · 02-25-2011, 12:54 PM

that looks great...... love this truck very clean....

Slick67 · 02-25-2011, 07:34 PM

Quote:

Originally Posted by 68 Quad C10

that looks great...... love this truck very clean....

Thanks Bro! Tryin to stay focused!! I'll have some more update pics tomorrow.

Slick67 · 02-27-2011, 10:28 PM

Another small update. I got the HEI wired permanently, installed my one-wire alternator and played musical belts till I got the perfect one. Also, got some spark-plug wire looms installed and covered alot of the wires under the hood. The first pic shows the aircleaner that is under my custom cover. I will be building my new spark plug wires tomorrow, so more pics!!!
Name: SAM_0830.jpg
Views: 1413
Size: 62.1 KB

Name: SAM_0830.jpg
Views: 1413
Size: 62.1 KB

Name: SAM_0831.jpg
Views: 1317
Size: 58.5 KB

Name: SAM_0832.jpg
Views: 1681
Size: 50.2 KB

VA72C10 · 02-27-2011, 11:06 PM

very nice! Looking sharp!

Slick67 · 02-28-2011, 12:20 AM

Quote:

Originally Posted by VA72C10

very nice! Looking sharp!

Thanks Dude! I am not too sure about those billet wire looms, but I guess it's better than nothin.

67chevy1series · 02-28-2011, 12:47 AM

those billet wire looms dont look like they are doing anything but other than that truck looks awsome

VA72C10 · 02-28-2011, 01:40 AM

Quote:

Originally Posted by 67chevy1series

those billet wire looms dont look like they are doing anything but other than that truck looks awsome

Quote:

Originally Posted by Slick67

I will be building my new spark plug wires tomorrow, so more pics!!!

THey'll be doing something when he runs the new spark plug wires through them

67chevy1series · 02-28-2011, 01:43 AM

OOOOOOOOOHHHHHHH isee how they help now thanks for the LIGHT BULB haha

Jeffs70 · 02-28-2011, 02:47 AM

looks great. I was thinking on the idea of these billet type wire looms and also had an after thought maybe even using the style of wires and connectors the old corvette's used to use and wrap the wires from behind the motor and from under the headers. just an idea if you dont like the looms.

Slick67 · 02-28-2011, 12:07 PM

Quote:

Originally Posted by VA72C10

THey'll be doing something when he runs the new spark plug wires through them

Thanks for clarifying that for me VA! I bought Street Fire 8.8mm wires to run permanently about a year ago and now it's time to take these cheap grey ones off and put my nice black ones on. Got to build em first.

Quote:

Originally Posted by Jeffs70

looks great. I was thinking on the idea of these billet type wire looms and also had an after thought maybe even using the style of wires and connectors the old corvette's used to use and wrap the wires from behind the motor and from under the headers. just an idea if you dont like the looms.

Thanks Jeff, I have seen those vette looms and they do look great. Maybe after I run my wires through these looms they will grow on me. After lookin at em yesterday I like them more.

72SWBChevy · 02-28-2011, 02:10 PM

Engine bay is looking sweeeet!! Cant wait to see it.

Slick67 · 02-28-2011, 07:45 PM

Quote:

Originally Posted by 72SWBChevy

Engine bay is looking sweeeet!! Cant wait to see it.

Thanks! Niftee 50ees is coming in a few weeks so I am trying to have the exhaust done this week and hopefully the interior partially done in the next couple of weeks.

Slick67 · 02-28-2011, 09:13 PM

Got the new wires temporarily put in so I can measure them to the distributor then make my cuts. After wiring them through the new wirelooms I think they look great and they are staying on the truck. Spark plug #6 has to be ran differently than the others because it is too close to the headers. But the short dipstick tube worked out great.
Name: SAM_0835.jpg
Views: 1296
Size: 46.3 KB

Name: SAM_0835.jpg
Views: 1296
Size: 46.3 KB

Name: SAM_0836.jpg
Views: 1227
Size: 34.3 KB

Name: SAM_0837.jpg
Views: 2283
Size: 45.3 KB

67chevy1series · 02-28-2011, 11:08 PM

i like those.....only i dont want any chrome on mine so i would need to paint them orange or black

02-24-2011, 08:31 PM	#1126
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Alrighty then, on to the progress pics. I ordered some Hedman Hedders part #68608, they are the mid-length 1967 Camaro/Chevelle headers. Summit had them for the least coin. $333 shipped. I test fitted the passenger side first and they fit perfect and luckily the trans lines that I bent a few months ago turned out to be perfect also, guess I got lucky again. I didn't get so lucky on the driver side. There is a post that is floating around out there that says these fit perfect on both sides with no mods, that is not really true. You can see the header is high toward the back of the block because it is hitting the motor mount bracket. Pay no attention to the dust and bondo sanding mess that is everywhere, we are still sanding the 39. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

02-24-2011, 08:38 PM	#1127
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Aggravated, I pulled out the trusty grinder and started throwin sparks. I know it looks like messy grinding.....because it was! I had to cover everything in cardboard which made it difficult to get to. After taking out about half an inch or so, the header dropped into posistion leaving about 1/16th of an inch clearance......good enough for government work!! Promise the next pics will be of a cleaner engine bay!!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

02-24-2011, 09:07 PM	#1128
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: 1967 C10 Custom Big Window the Headers look great, sorry to hear about the fitting problems. I was planning on getting this same set of headers. I wonder if it would be smart for me to mod my mount tower and flush it out on the top rather then have that hump sitting out there that much where you had to grind __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

02-24-2011, 09:22 PM	#1130
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1967 C10 Custom Big Window looks good...even though it's sooooooo dirty __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-24-2011, 10:17 PM	#1132
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window slick it looks awsome! i dont care my engine bay is dusty to great work and now paint that mount!

02-25-2011, 12:09 AM	#1134
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window slick thats funny! nice job man seriously.

02-25-2011, 12:11 AM	#1135
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: 1967 C10 Custom Big Window wow those look slick! basketball seasons over so i have time to actually work on my truck now. counting down the days till April 2nd! __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

02-25-2011, 12:54 PM	#1137
68 Quad C10 Registered User Join Date: Jul 2009 Location: Idaho Falls Posts: 324	Re: 1967 C10 Custom Big Window that looks great...... love this truck very clean.... __________________ http://www.tandscustomcars.com/ My Quad Cab build:http://67-72chevytrucks.com/vboard/s...d.php?t=352342 IT"S GOT A ROOF NOW WHOO HOO!!!! 65 GTO Build (If you wanna check it out) http://67-72chevytrucks.com/vboard/s...40#post4503040

02-27-2011, 10:28 PM	#1139
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Another small update. I got the HEI wired permanently, installed my one-wire alternator and played musical belts till I got the perfect one. Also, got some spark-plug wire looms installed and covered alot of the wires under the hood. The first pic shows the aircleaner that is under my custom cover. I will be building my new spark plug wires tomorrow, so more pics!!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

02-27-2011, 11:06 PM	#1140
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1967 C10 Custom Big Window very nice! Looking sharp! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-28-2011, 12:47 AM	#1142
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window those billet wire looms dont look like they are doing anything but other than that truck looks awsome

02-28-2011, 01:43 AM	#1144
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window OOOOOOOOOHHHHHHH isee how they help now thanks for the LIGHT BULB haha

02-28-2011, 02:47 AM	#1145
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: 1967 C10 Custom Big Window looks great. I was thinking on the idea of these billet type wire looms and also had an after thought maybe even using the style of wires and connectors the old corvette's used to use and wrap the wires from behind the motor and from under the headers. just an idea if you dont like the looms. __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

02-28-2011, 02:10 PM	#1147
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: 1967 C10 Custom Big Window Engine bay is looking sweeeet!! Cant wait to see it. __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

02-28-2011, 09:13 PM	#1149
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Got the new wires temporarily put in so I can measure them to the distributor then make my cuts. After wiring them through the new wirelooms I think they look great and they are staying on the truck. Spark plug #6 has to be ran differently than the others because it is too close to the headers. But the short dipstick tube worked out great. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"



Register or Log In To remove these advertisements.

02-28-2011, 11:08 PM	#1150
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window i like those.....only i dont want any chrome on mine so i would need to paint them orange or black

Register or Log In To remove these advertisements.