KS Parting a 72 custom camper now - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72 Super** · 10-09-2012, 11:00 AM

Hi Randy, I didn't see your reply at first. Are the engine lift hooks correct for a 72 truck? I haven't had an truck with them in a while. I will take these If they are correct for 72 and in good shape. You can send me your payment info. Thanks Ray.

Quote:

Originally Posted by teeitup

72 Super, Ray, engine lifts $10. The valve covers look OK, thejust need cleaned up and painted, $15 for them plus shipping for all

cericd, these are the only good ones I have, sorry

hexafamily, I will measure it in a bit

RPicka, I still need to cut silicon and see if the hinge is broke, I will in a bit. The chrome has some pitting on them

Thanks Randy

Posted via Mobile Device

**zicc1835** · 10-09-2012, 04:11 PM

Quote:

Originally Posted by teeitup

Jud, I don't think I have any out there but will look

Jess, I will let you know when your money arrives, Thanks

dec010974, motor stands are yours, Thanks

Randy

thanks Randy mailed it today

dec010974 · 10-09-2012, 06:40 PM

payment sent. should receive by thursday. please send ASAP. thanks randy.

**jocko** · 10-10-2012, 12:14 AM

Quote:

Originally Posted by teeitup

RatRod68, sounds good

cericd, no problem

Jocko, it has been sold to Brian, pics of it on post 50 pics 3, 4 and 5 and post 51 1st pic

Thanks Randy

Good to go, thanks Randy! Appreciate the pics.

teeitup · 10-11-2012, 01:17 PM

72 Super, Ray, they are stock, $15 shipped I don't have pay pal anymore

Zicc1835, Jess, I'll let you know when it gets here

dec010974, I'll let you know when it gets here

Jocko, no problem

Thanks Randy

Steve Cole · 10-11-2012, 01:56 PM

Hey Randy, How much for the gas pedal assembly shipped ?

teeitup · 10-11-2012, 04:39 PM

Steve, $36 shipped for it complete. Thanks Randy

Steve Cole · 10-11-2012, 08:40 PM

Hey Randy, did this truck have a turbo 400 it? If so, do you have the kick down switch and harness?

BTW... That pedal assembly comes with the throttle cable right?
Posted via Mobile Device

teeitup · 10-11-2012, 08:42 PM

Steve, this one had a th350 but I do have a turbo 400 kickdown switch out there. Yes comes with cable and carb bracket. Thanks Randy

Steve Cole · 10-11-2012, 09:03 PM

Will the kick down switch mount on this pedal bracket? Do you have the wire harness with the switch?
Posted via Mobile Device

teeitup · 10-11-2012, 10:33 PM

I should have the right bracket out there with switch, not sure about wiring, I will look. $51 shipped for it

Steve Cole · 10-12-2012, 08:47 AM

Sounds good Randy. Just so I am clear on this, $51.00 shipped includes the pedal assy, (like before) with the T400 bracket and switch, right?

Thanks.

teeitup · 10-12-2012, 08:33 PM

Here ya go Steve, wire that goes to tranny needs sliced, missing the bolt that holds on kickdown to bracket

Steve Cole · 10-12-2012, 10:48 PM

Looks good, thanks Randy. I'll take it; thanks for being patient with me. I'll try to get to the bank tomorrow before they close for the money order.
Posted via Mobile Device

56bigfish · 10-13-2012, 12:18 PM

Hey Randy,Wasn't sure ,the mirrors gone? If not,Next! Thanks

teeitup · 10-13-2012, 12:58 PM

I've got 1 other guy ahead of you, Ozark Tim, asked to be 2nd on them, I will PM him and see, and let you know, Thanks Randy

Steve Cole · 10-13-2012, 03:45 PM

Well my dinky post office isn't open on weekends so I will have to wait until next week before I can get a money order. Can you PM me your address?
Posted via Mobile Device

teeitup · 10-13-2012, 04:20 PM

Steve, info sent, no worries. Thanks Randy

kevmic28 · 10-13-2012, 07:28 PM

Hey Randy,
I need a lower pax side a arm for a 70 with drum brakes. Do you by chance have one?

teeitup · 10-13-2012, 11:24 PM

Kevin, sorry none right now. Thanks Randy

teeitup · 10-14-2012, 10:54 PM

56BigFish, mirrors are still for sale

RatRod68 · 10-15-2012, 08:51 AM

Sorry Randy, I have been slacking. I am going to have to pass on the mirrors right now. Thanks for the pictures and everything, and I am sure I will be needing some parts from you in the future!

sixty-eight shorty · 10-16-2012, 12:30 AM

Quote:

Originally Posted by teeitup

Sorry guys fell asleep while putting kids to bed, Pics now

Eighty-Eight shorty, wiring harness has been spliced down by starter. I do have anotehr set of Alt brackets $27 shpped for them. $10 more for the harness if I ship it with the Alts

Jocko, its a 2 barrell

gmc 2500 4x4, I will give him till Sat morning to decide on booster setup since I'm just posting pics now then I will let you know

RatRod68, I can measure them at lunch, they are stock mirrors

Thanks Randy

Posted via Mobile Device

Randy , I still want to buy the alt brackets if you still have them . I will also take the harness . Pm your addy so that I can send you the m.o . Thanks , frank
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

**gmc 2500 4x4** · 10-16-2012, 06:05 AM

Quote:

Originally Posted by gmc 2500 4x4

2nd inline on booster setup 14063

i found a booster

teeitup · 10-16-2012, 07:40 AM

Rat Rod 68, no problem

Frank, info sent, Thanks

gmc 2500 4x4, glad you found one, Thanks

Randy

10-09-2012, 06:40 PM	#103
dec010974 Registered User Join Date: Oct 2012 Location: Miami, Florida Posts: 916	Re: Parting a 72 custom camper now payment sent. should receive by thursday. please send ASAP. thanks randy.

10-11-2012, 01:17 PM	#105
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now 72 Super, Ray, they are stock, $15 shipped I don't have pay pal anymore Zicc1835, Jess, I'll let you know when it gets here dec010974, I'll let you know when it gets here Jocko, no problem Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-11-2012, 01:56 PM	#106
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Parting a 72 custom camper now Hey Randy, How much for the gas pedal assembly shipped ?

10-11-2012, 04:39 PM	#107
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now Steve, $36 shipped for it complete. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-11-2012, 08:40 PM	#108
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Parting a 72 custom camper now Hey Randy, did this truck have a turbo 400 it? If so, do you have the kick down switch and harness? BTW... That pedal assembly comes with the throttle cable right? Posted via Mobile Device

10-11-2012, 08:42 PM	#109
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now Steve, this one had a th350 but I do have a turbo 400 kickdown switch out there. Yes comes with cable and carb bracket. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-11-2012, 09:03 PM	#110
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Parting a 72 custom camper now Will the kick down switch mount on this pedal bracket? Do you have the wire harness with the switch? Posted via Mobile Device

10-11-2012, 10:33 PM	#111
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now I should have the right bracket out there with switch, not sure about wiring, I will look. $51 shipped for it __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-12-2012, 08:47 AM	#112
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Parting a 72 custom camper now Sounds good Randy. Just so I am clear on this, $51.00 shipped includes the pedal assy, (like before) with the T400 bracket and switch, right? Thanks.

10-12-2012, 08:33 PM	#113
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now Here ya go Steve, wire that goes to tranny needs sliced, missing the bolt that holds on kickdown to bracket Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-12-2012, 10:48 PM	#114
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Parting a 72 custom camper now Looks good, thanks Randy. I'll take it; thanks for being patient with me. I'll try to get to the bank tomorrow before they close for the money order. Posted via Mobile Device

10-13-2012, 12:18 PM	#115
56bigfish Registered User Join Date: Aug 2012 Location: Lompoc,Ca. Posts: 14	Re: Parting a 72 custom camper now Hey Randy,Wasn't sure ,the mirrors gone? If not,Next! Thanks

10-13-2012, 12:58 PM	#116
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now I've got 1 other guy ahead of you, Ozark Tim, asked to be 2nd on them, I will PM him and see, and let you know, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-13-2012, 03:45 PM	#117
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Parting a 72 custom camper now Well my dinky post office isn't open on weekends so I will have to wait until next week before I can get a money order. Can you PM me your address? Posted via Mobile Device

10-13-2012, 04:20 PM	#118
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now Steve, info sent, no worries. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

10-13-2012, 07:28 PM	#119
kevmic28 Registered User Join Date: Jun 2009 Location: Arlington Texas Posts: 602	Re: Parting a 72 custom camper now Hey Randy, I need a lower pax side a arm for a 70 with drum brakes. Do you by chance have one? __________________ 1970 GMC truck 1988 Harley 1200 Sportster

10-13-2012, 11:24 PM	#120
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now Kevin, sorry none right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-14-2012, 10:54 PM	#121
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now 56BigFish, mirrors are still for sale __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-15-2012, 08:51 AM	#122
RatRod68 Registered User Join Date: Aug 2007 Location: Kentucky Posts: 828	Re: Parting a 72 custom camper now Sorry Randy, I have been slacking. I am going to have to pass on the mirrors right now. Thanks for the pictures and everything, and I am sure I will be needing some parts from you in the future! __________________ build Threads: Nasty 68 C10. My lil hotrod Leftovers 68 C20 D-Ranged Ford Ranger on steroids Semper Fi

10-16-2012, 07:40 AM	#125
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now Rat Rod 68, no problem Frank, info sent, Thanks gmc 2500 4x4, glad you found one, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.