New girl with a new project - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 08-31-2010, 10:03 PM

nice i bet that would buff out nice!

your all bout tearin the stuff out of the inside cab huh lol, not bad for 500$..

WorkinOnIt · 08-31-2010, 10:17 PM

Quote:

Originally Posted by oldblue1968chevy

nice i bet that would buff out nice!

your all bout tearin the stuff out of the inside cab huh lol, not bad for 500$..

Ha you think it would buff out nice... but its a pain in the ass to buff it out
And we had to se what the floor looked like. No rust! Thank God
buttt the idiot screwed in the carpet kit so I have a bunch of holes to fill in
Then put in the new carpet kit and switch seat covers.. no biggy?

oldblue1968chevy · 08-31-2010, 10:31 PM

start buffing polishing lol

WorkinOnIt · 08-31-2010, 10:34 PM

Quote:

Originally Posted by oldblue1968chevy

start buffing polishing lol

Yeahh I know.. just started on the pass side of the bed.
Didn't do a lot :/ I hate looking in the fuel door because the amazing original color shows, its slightly depressing that I probably wont get there

72chevyfleet · 09-08-2010, 01:58 AM

no recent pictures or what? done anything lately?

WorkinOnIt · 09-11-2010, 12:45 AM

Did you not read back a few posts? This thread is dead. I have to sell or part out the chevy.
Posted via Mobile Device

72chevyfleet · 09-11-2010, 01:16 AM

look dont sell it why buy something thats already done then someone will ask u about it and u wont know anything ive wanted to buy an already built truck many many times but then i cant say that i did the c-notch or i did the body work or i suped up that motor stick with the truck and ruff it out girl like seriously i lost hope a couple times before mine even ran or looked good but then it all came together and got a motor and its almost legal now it will come together but if u get rid of it you will start noticing **** i shouldnt of sold it i loved that truck and u will miss it bottom line is dont sell it you could make it a good looking truck and sell it down the road for 3-5 times as much as u would get out of it now if u sold it but thats just my opinion

WorkinOnIt · 09-11-2010, 01:25 AM

That's my opinion too but unless I can hold it for six more monthes I will have no say in it..
I'm not happy about it, I've got the 85' its functional so its what I have to use
Posted via Mobile Device

72chevyfleet · 09-11-2010, 01:26 AM

why wouldnt you be able to hold it?

WorkinOnIt · 09-11-2010, 01:39 AM

Im 17 if my uncle wants it gone it goes..
Posted via Mobile Device

72chevyfleet · 09-11-2010, 12:40 PM

find somewhere else to stash it
do what i would do buy a cover for it put it somewhere un noticeable and cover it up

WorkinOnIt · 09-11-2010, 12:57 PM

You really never read this thread ...
the truck hasn't moved in about four years it gas his engine ands tranny in it
Posted via Mobile Device

72chevyfleet · 09-11-2010, 12:58 PM

i did read it the way u made it sound was everything was yours

WorkinOnIt · 09-11-2010, 01:15 PM

Yeah because my original understanding was I traded the engine and tranny for the Toyota
But he's very good at not keeping up with his promises. Ill be lucky if actually gives me the 85' the way everything else has been taken, I dont know..
Posted via Mobile Device

67chevy1series · 09-11-2010, 02:48 PM

well thats f!&#$d thats suks

i hope everything goes good and if you get another 67 72 you better show ill be waitn

WorkinOnIt · 09-12-2010, 12:03 AM

I'm hoping I will keep the one I have, but either way I will be back

Posted via Mobile Device

oldblue72c10 · 11-27-2010, 12:23 AM

Hope it all goes good, just keep on rockin, the 85 looks nice

WorkinOnIt · 01-20-2011, 05:16 PM

So I figured I Should update you guys a little, now that I have everything figured out.

I swore into the navy December 8th, and i will be shipping August 10th, 2011
Therefore, i really cant fix a truck for myself right now. but I'll be 18 next month.

So, I'm keeping the C20. The 85 I have no interest in. When they (my family) get sick of my truck, Ill hand them the money and tell them to put it in storage. I really want to keep this truck until i can fix it, and once I'm able to fix it it'll be worth a lot more.

Thanks for all your support! Ill be back in around four years

67chevylongbed · 01-20-2011, 10:32 PM

Glad to hear your keeping it! Thank you for serving too

spike38 · 01-20-2011, 10:45 PM

Tasha

If you get stationed stateside, There is always an
auto hobby shop on base. But most of all, You will
get to go places, And see thing, That you would
have never had the chance to regularly.

Granted, Some of them are not the best.

But those are the ones that teach you to appreciate
what we have in the USA. I wish you the best.

Spike
"U.S.M.C. 86-92"
Oooh-Raw!!!!

WorkinOnIt · 03-04-2011, 03:12 AM

Thank you Guys. I'm going to do my best to try and keep it. I turned 18 so I',m going to it it in my name. I'm currently looking for a car as a driver..

(I HATE cars)
Makes me sad that I wasn't able to fix up the ol Chev.

Ill be back here sometime! Maybe in four years when I'm in reserves.
Thanks for all the support and guidance you guys gave me. See you around.

08-31-2010, 10:03 PM	#101
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: New girl with a new project nice i bet that would buff out nice! your all bout tearin the stuff out of the inside cab huh lol, not bad for 500$.. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-31-2010, 10:31 PM	#103
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: New girl with a new project start buffing polishing lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-08-2010, 01:58 AM	#105
72chevyfleet Learning As I Go Join Date: Feb 2009 Location: scotts valley california Posts: 250	Re: New girl with a new project no recent pictures or what? done anything lately? __________________ 1972 Chevy C-20 Longbed 2wd Granny Low with a Crate 350: Air Gap Manifold, Edelbrock 600cfm, HEI, Headers to a 40 series flow (soon to be dual again)

09-11-2010, 12:45 AM	#106
WorkinOnIt Registered User Join Date: Mar 2010 Location: Damascus, OR Posts: 57	Re: New girl with a new project Did you not read back a few posts? This thread is dead. I have to sell or part out the chevy. Posted via Mobile Device __________________ -Tasha- 71' C20 longbed w/350{Project}[[looking for a name!!]] "I am not young enough to know everything." "I know the price of success: Dedication, hard work and the unremitting devotion to the things you want to see happen" -Frank Lloyd Wright

09-11-2010, 01:16 AM	#107
72chevyfleet Learning As I Go Join Date: Feb 2009 Location: scotts valley california Posts: 250	Re: New girl with a new project look dont sell it why buy something thats already done then someone will ask u about it and u wont know anything ive wanted to buy an already built truck many many times but then i cant say that i did the c-notch or i did the body work or i suped up that motor stick with the truck and ruff it out girl like seriously i lost hope a couple times before mine even ran or looked good but then it all came together and got a motor and its almost legal now it will come together but if u get rid of it you will start noticing **** i shouldnt of sold it i loved that truck and u will miss it bottom line is dont sell it you could make it a good looking truck and sell it down the road for 3-5 times as much as u would get out of it now if u sold it but thats just my opinion __________________ 1972 Chevy C-20 Longbed 2wd Granny Low with a Crate 350: Air Gap Manifold, Edelbrock 600cfm, HEI, Headers to a 40 series flow (soon to be dual again)

09-11-2010, 01:25 AM	#108
WorkinOnIt Registered User Join Date: Mar 2010 Location: Damascus, OR Posts: 57	Re: New girl with a new project That's my opinion too but unless I can hold it for six more monthes I will have no say in it.. I'm not happy about it, I've got the 85' its functional so its what I have to use Posted via Mobile Device __________________ -Tasha- 71' C20 longbed w/350{Project}[[looking for a name!!]] "I am not young enough to know everything." "I know the price of success: Dedication, hard work and the unremitting devotion to the things you want to see happen" -Frank Lloyd Wright

09-11-2010, 01:26 AM	#109
72chevyfleet Learning As I Go Join Date: Feb 2009 Location: scotts valley california Posts: 250	Re: New girl with a new project why wouldnt you be able to hold it? __________________ 1972 Chevy C-20 Longbed 2wd Granny Low with a Crate 350: Air Gap Manifold, Edelbrock 600cfm, HEI, Headers to a 40 series flow (soon to be dual again)

09-11-2010, 01:39 AM	#110
WorkinOnIt Registered User Join Date: Mar 2010 Location: Damascus, OR Posts: 57	Re: New girl with a new project Im 17 if my uncle wants it gone it goes.. Posted via Mobile Device __________________ -Tasha- 71' C20 longbed w/350{Project}[[looking for a name!!]] "I am not young enough to know everything." "I know the price of success: Dedication, hard work and the unremitting devotion to the things you want to see happen" -Frank Lloyd Wright

09-11-2010, 12:40 PM	#111
72chevyfleet Learning As I Go Join Date: Feb 2009 Location: scotts valley california Posts: 250	Re: New girl with a new project find somewhere else to stash it do what i would do buy a cover for it put it somewhere un noticeable and cover it up __________________ 1972 Chevy C-20 Longbed 2wd Granny Low with a Crate 350: Air Gap Manifold, Edelbrock 600cfm, HEI, Headers to a 40 series flow (soon to be dual again)

09-11-2010, 12:57 PM	#112
WorkinOnIt Registered User Join Date: Mar 2010 Location: Damascus, OR Posts: 57	Re: New girl with a new project You really never read this thread ... the truck hasn't moved in about four years it gas his engine ands tranny in it Posted via Mobile Device __________________ -Tasha- 71' C20 longbed w/350{Project}[[looking for a name!!]] "I am not young enough to know everything." "I know the price of success: Dedication, hard work and the unremitting devotion to the things you want to see happen" -Frank Lloyd Wright

09-11-2010, 12:58 PM	#113
72chevyfleet Learning As I Go Join Date: Feb 2009 Location: scotts valley california Posts: 250	Re: New girl with a new project i did read it the way u made it sound was everything was yours __________________ 1972 Chevy C-20 Longbed 2wd Granny Low with a Crate 350: Air Gap Manifold, Edelbrock 600cfm, HEI, Headers to a 40 series flow (soon to be dual again)

09-11-2010, 01:15 PM	#114
WorkinOnIt Registered User Join Date: Mar 2010 Location: Damascus, OR Posts: 57	Re: New girl with a new project Yeah because my original understanding was I traded the engine and tranny for the Toyota But he's very good at not keeping up with his promises. Ill be lucky if actually gives me the 85' the way everything else has been taken, I dont know.. Posted via Mobile Device __________________ -Tasha- 71' C20 longbed w/350{Project}[[looking for a name!!]] "I am not young enough to know everything." "I know the price of success: Dedication, hard work and the unremitting devotion to the things you want to see happen" -Frank Lloyd Wright

09-11-2010, 02:48 PM	#115
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: New girl with a new project well thats f!&#$d thats suks i hope everything goes good and if you get another 67 72 you better show ill be waitn

09-12-2010, 12:03 AM	#116
WorkinOnIt Registered User Join Date: Mar 2010 Location: Damascus, OR Posts: 57	Re: New girl with a new project I'm hoping I will keep the one I have, but either way I will be back Posted via Mobile Device __________________ -Tasha- 71' C20 longbed w/350{Project}[[looking for a name!!]] "I am not young enough to know everything." "I know the price of success: Dedication, hard work and the unremitting devotion to the things you want to see happen" -Frank Lloyd Wright

11-27-2010, 12:23 AM	#117
oldblue72c10 LIGHT' EM UP!!!!!!!!!! Join Date: Nov 2009 Location: Collinsville Oklahoma Posts: 243	Re: New girl with a new project Hope it all goes good, just keep on rockin, the 85 looks nice __________________ BONDO IS YOUR FRIEND WOULD YOU EVER USE YOUR FRIEND 1972 custom 10 longbed current 360 building a racing 355



Register or Log In To remove these advertisements.

01-20-2011, 05:16 PM	#118
WorkinOnIt Registered User Join Date: Mar 2010 Location: Damascus, OR Posts: 57	Re: New girl with a new project So I figured I Should update you guys a little, now that I have everything figured out. I swore into the navy December 8th, and i will be shipping August 10th, 2011 Therefore, i really cant fix a truck for myself right now. but I'll be 18 next month. So, I'm keeping the C20. The 85 I have no interest in. When they (my family) get sick of my truck, Ill hand them the money and tell them to put it in storage. I really want to keep this truck until i can fix it, and once I'm able to fix it it'll be worth a lot more. Thanks for all your support! Ill be back in around four years __________________ -Tasha- 71' C20 longbed w/350{Project}[[looking for a name!!]] "I am not young enough to know everything." "I know the price of success: Dedication, hard work and the unremitting devotion to the things you want to see happen" -Frank Lloyd Wright

01-20-2011, 10:32 PM	#119
67chevylongbed Registered User Join Date: May 2009 Location: Carmichael, California Posts: 576	Re: New girl with a new project Glad to hear your keeping it! Thank you for serving too __________________ Eric 1967 C10 LWB SOLD.... 1995 Ford F-250 4x4 Powerstroke, 342k "Each generation goes further than the generation preceding it because it stands on the shoulders of that generation. You will have opportunities beyond anything we've ever known." -Ronald Reagan

01-20-2011, 10:45 PM	#120
spike38 Registered User Join Date: Jun 2010 Location: Leesburg GA Posts: 547	Re: New girl with a new project Tasha If you get stationed stateside, There is always an auto hobby shop on base. But most of all, You will get to go places, And see thing, That you would have never had the chance to regularly. Granted, Some of them are not the best. But those are the ones that teach you to appreciate what we have in the USA. I wish you the best. Spike "U.S.M.C. 86-92" *Oooh-Raw!!!!* __________________ 68 stepside http://67-72chevytrucks.com/vboard/s...0&goto=newpost

03-04-2011, 03:12 AM	#121
WorkinOnIt Registered User Join Date: Mar 2010 Location: Damascus, OR Posts: 57	Re: New girl with a new project Thank you Guys. I'm going to do my best to try and keep it. I turned 18 so I',m going to it it in my name. I'm currently looking for a car as a driver.. (I HATE cars) Makes me sad that I wasn't able to fix up the ol Chev. Ill be back here sometime! Maybe in four years when I'm in reserves. Thanks for all the support and guidance you guys gave me. See you around. __________________ -Tasha- 71' C20 longbed w/350{Project}[[looking for a name!!]] "I am not young enough to know everything." "I know the price of success: Dedication, hard work and the unremitting devotion to the things you want to see happen" -Frank Lloyd Wright

Register or Log In To remove these advertisements.