What did you do to your truck today.The 3rd chapter - Page 55 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**EdwardSams** · 07-26-2020, 10:30 PM

Great color.

Today I started cleaning up the under hood wiring and put a frame to bed ground on that was missing.

Then I took each of the little ones out for a ride around town.

Quote:

Originally Posted by CryingJoker

Started cleaning on a set of GM transport wheels I recently picked up cheap. Decided since 1 was more faded than the others they needed a touch up while I waited on tires to ship. And figured why not change it a little from normal black or white. Painted dodge granite crystal on a gamble and I'm digging the results so far. Think I did fairly well first time trying to clear coat wheels.

20200725_155739 by James Williams, on Flickr

20200725_155751 by James Williams, on Flickr

**SoCoC10** · 07-28-2020, 10:04 AM

Quote:

Originally Posted by DeadheadNM

Drove it down the road to pickup some corn for dinner. Corn is sold roadside on the honor system. Sunflowers are starting to bloom.

Nice pics Pete! Thanks for sharing. How was the 🌽 🌾 corn?

**SoCoC10** · 07-28-2020, 08:10 PM

Progress on my 1971 Cheyenne Short bed.

**Ol Blue K20** · 07-28-2020, 08:16 PM

Looks great

Old_Gold · 07-28-2020, 08:29 PM

Oh yea, that orange looks great!

I finally got my speedometer dialed in after switching to a 700r4. Was way off to begin with, I guess the Astro van donor didn't have a stump puller rear end!

Jim

**DeadheadNM** · 07-28-2020, 10:49 PM

Quote:

Originally Posted by Steeveedee

That sure as shootin' ain't California! You'd find no corn, no money, no table, no shade and no cash box around here. And they'd probably throw the cabbage at passing cars. Of course, my nice little corner here, we just have crack heads.

Albuquerque would have seen the same. We’ve been here two years now and are very pleased with the move.

Quote:

Originally Posted by SoCoC10

Nice pics Pete! Thanks for sharing. How was the 🌽 🌾 corn?

Tasty! Pics look great - hope you get some drive time in it before the snow falls.

Ptjsk · 07-29-2020, 04:03 PM

Quote:

Originally Posted by Steeveedee

That sure as shootin' ain't California! You'd find no corn, no money, no table, no shade and no cash box around here. And they'd probably throw the cabbage at passing cars. Of course, my nice little corner here, we just have crack heads.

Sad....but sooooo true! Not much better here at the North end of the State as well.

Pat

Andy4639 · 07-29-2020, 07:46 PM

New fuel line ran from gas pump up to carburetor with a in-line filter & the brass one. 66 Chevelle 2 barrel filter for it fit perfect.
Took the old line loose and found this. Gas was clogged up, it shut off and wouldn't stay running. I may need to do a tank cleaning in the near future.

Also got the hub caps on the front wheels.

**truckdude239** · 07-29-2020, 09:17 PM

I drove it all over the place today

66clow · 07-30-2020, 06:51 AM

Bead roller and dimple died some seat side covers and cup holder. Instagram C10ETC

Andy4639 · 07-30-2020, 02:59 PM

Added the under dash lights in the Ramp truck.
I don't have the door pins installed yet. I have to make up a ground wire for them. Has anyone made their own harness to plug into the lights?

**BC10** · 07-30-2020, 04:39 PM

Quote:

Originally Posted by SoCoC10

Progress on my 1971 Cheyenne Short bed.

Man! Now I want my truck to be orange. Stunning!

Andy4639 · 07-30-2020, 08:12 PM

I just finished installing new push on door seals and 66 truck plates in the ramp truck.

**68bowtie** · 07-30-2020, 09:12 PM

Got my exhaust installed today. I’m officially ready for cam breakin.

Name: 98EA02E0-91E0-4075-A015-D498A50E3111.jpg
Views: 615
Size: 59.7 KB

**SoCoC10** · 07-30-2020, 09:23 PM

Bed back on the frame. Doors back on the cab.

67C10Step · 07-31-2020, 10:07 AM

SoCoC10,
Looking fabulous brother! You gotta be excited.

I'm like a kit waiting on Christmas right now. Got ball joints, tie rod ends, lowering spindles, etc. to work the front end over on my ride. Hope to post up some progress photos in the next few weeks.

OregonNed · 07-31-2020, 10:31 AM

Quote:

Originally Posted by SoCoC10

Bed back on the frame. Doors back on the cab.

Beautiful!

Chevys4life · 07-31-2020, 12:29 PM

Quote:

Originally Posted by SoCoC10

Bed back on the frame. Doors back on the cab.

Thanks going to be a nice one once it's together. Looking good!!!

**EdwardSams** · 08-08-2020, 06:24 PM

Headlight relay kit and some tailgate lettering. Really liking how CHEVROLET pops (lettering kit from LMC).

**71CHEVYSHORTBED402** · 08-08-2020, 06:53 PM

Quote:

Originally Posted by SoCoC10

Progress on my 1971 Cheyenne Short bed.

Beautiful

Chevys4life · 08-09-2020, 12:37 PM

Quote:

Originally Posted by EdwardSams

Headlight relay kit and some tailgate lettering. Really liking how CHEVROLET pops (lettering kit from LMC).

That lettering kit makes a bit difference. It looks really nice.

72c20customcamper · 08-09-2020, 08:44 PM

Sold it.

**sfont66** · 08-09-2020, 08:52 PM

Finally had tires mounted on new wheels, vintage, old school look, but I like it.
Sorry for the lousy pics, but the weather was rough here today, rained very heavy!

BugzC10 · 08-09-2020, 09:00 PM

Quote:

Originally Posted by sfont66

Finally had tires mounted on new wheels, vintage, old school look, but I like it.
Sorry for the lousy pics, but the weather was rough here today, rained very heavy!

Like the MEATS!!

**Boog** · 08-09-2020, 09:17 PM

Switched out the fan clutch and shroud. I expected the “foreign made” shroud to be off some and sure enough it was. The two sides had about a 3/4” bow in them. I laid a straight edge up to it and snapped these pics. I trimmed it to fit and it’s hardly noticeable now. But REALLY?

07-28-2020, 08:10 PM	#1353
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,306	Re: What did you do to your truck today.The 3rd chapter Progress on my 1971 Cheyenne Short bed. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count Last edited by SoCoC10; 07-30-2020 at 08:23 AM.

07-28-2020, 08:16 PM	#1354
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: What did you do to your truck today.The 3rd chapter Looks great __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

07-28-2020, 08:29 PM	#1355
Old_Gold Registered User Join Date: Jan 2017 Location: Mason City, IA Posts: 157	Re: What did you do to your truck today.The 3rd chapter Oh yea, that orange looks great! I finally got my speedometer dialed in after switching to a 700r4. Was way off to begin with, I guess the Astro van donor didn't have a stump puller rear end! Jim

07-29-2020, 07:46 PM	#1358
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What did you do to your truck today.The 3rd chapter New fuel line ran from gas pump up to carburetor with a in-line filter & the brass one. 66 Chevelle 2 barrel filter for it fit perfect. Took the old line loose and found this. Gas was clogged up, it shut off and wouldn't stay running. I may need to do a tank cleaning in the near future. Also got the hub caps on the front wheels. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-29-2020, 09:17 PM	#1359
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: What did you do to your truck today.The 3rd chapter I drove it all over the place today Attached Images __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

07-30-2020, 06:51 AM	#1360
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today.The 3rd chapter Bead roller and dimple died some seat side covers and cup holder. Instagram C10ETC Attached Images

07-30-2020, 02:59 PM	#1361
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What did you do to your truck today.The 3rd chapter Added the under dash lights in the Ramp truck. I don't have the door pins installed yet. I have to make up a ground wire for them. Has anyone made their own harness to plug into the lights? Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-30-2020, 08:12 PM	#1363
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What did you do to your truck today.The 3rd chapter I just finished installing new push on door seals and 66 truck plates in the ramp truck. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-30-2020, 09:12 PM	#1364
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,748	Re: What did you do to your truck today.The 3rd chapter Got my exhaust installed today. I’m officially ready for cam breakin. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

07-30-2020, 09:23 PM	#1365
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,306	Re: What did you do to your truck today.The 3rd chapter Bed back on the frame. Doors back on the cab. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

07-31-2020, 10:07 AM	#1366
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do to your truck today.The 3rd chapter SoCoC10, Looking fabulous brother! You gotta be excited. I'm like a kit waiting on Christmas right now. Got ball joints, tie rod ends, lowering spindles, etc. to work the front end over on my ride. Hope to post up some progress photos in the next few weeks. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

08-08-2020, 06:24 PM	#1369
EdwardSams Senior Member Join Date: Aug 2018 Location: Long Island, NY Posts: 236	Re: What did you do to your truck today.The 3rd chapter Headlight relay kit and some tailgate lettering. Really liking how CHEVROLET pops (lettering kit from LMC). Attached Images

08-09-2020, 08:44 PM	#1372
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,653	Re: What did you do to your truck today.The 3rd chapter Sold it. __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

08-09-2020, 08:52 PM	#1373
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 358	Re: What did you do to your truck today.The 3rd chapter Finally had tires mounted on new wheels, vintage, old school look, but I like it. Sorry for the lousy pics, but the weather was rough here today, rained very heavy! Attached Images __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project

08-09-2020, 09:17 PM	#1375
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,461	Re: What did you do to your truck today.The 3rd chapter Switched out the fan clutch and shroud. I expected the “foreign made” shroud to be off some and sure enough it was. The two sides had about a 3/4” bow in them. I laid a straight edge up to it and snapped these pics. I trimmed it to fit and it’s hardly noticeable now. But REALLY? Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.