![]() |
|
![]() |
#1 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,967
|
Re: Project: Recycle
A little progress tonight on the pass side truss.
I started welding the inside of the new 'truss' to the top of the original frame. I welded the areas where the reinforcement gussets were going first, then put the gussets in place to help keep the truss as square as possible w/the frame rail once the heat is applied. With the gussets in place (& a couple of bolts/nuts for the extreme corners), I welded the remainder of the inside. I started prepping the outer edge but it was getting late so I decided to let things cool down & will try again this weekend. There will be two additional gussets added where the 60° transition pieces will be from the top of the truss to the top of the OE framerail....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#2 |
I'M TRUCK CRAZY!
Join Date: Oct 2006
Location: Sachse, TEXAS
Posts: 1,737
|
Re: Project: Recycle
looking good Scoti
|
![]() |
![]() |
![]() |
#3 |
Under Construction
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
|
Re: Project: Recycle
looking good.
__________________
Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 |
![]() |
![]() |
![]() |
#4 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Project: Recycle
Looks good Scoti. Are you going to use pieces from the other frame to make the 60 degress transitions back down to the OE frame? I would think that using them with the radius for the bend (top edge of the frame) would be consistant and would "flow" into the OE frame really well. Just a thought for you...
__________________
Karl ![]() 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,967
|
Re: Project: Recycle
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
![]() |
![]() |
![]() |
#6 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Re: Project: Recycle
Scot are you making templates? Maybe you could offer this as a kit...
![]()
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,967
|
Re: Project: Recycle
Quote:
The main reason I took the route I did was @ the time this started, nobody offered a 'small' step-notch. I don't plan to plant the frame rails & didn't want to step the bed floor (and still wanted bed depth). The bolt-in c-notches could have worked for the heights I planned but they're not engineered for the additional rear-end set back that I now have. After discussion w/Nathan @ Porterbuilt, he now offers a 'small' step notch that basically allows the notch to be the entire depth of the original frame w/the 'step-notch' portion being directly above it. IIRC, they're 4" above the top of the original frame. The ones in my pics are 2.5" above the original frame rail which yeilds 4" rail height above the c-notched area (which is only .500" less than the original frame rail height).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 04-27-2010 at 05:00 PM. |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,967
|
Re: Project: Recycle
Ok . . ..... I now have about 50% of the fab work done on the frame 'trusses'.
The gusset plates (4 on each side) are welded in; the length of each truss was welded to the frame on the inside, & the 60° angles are trimmed on the ends of the outer portion of each truss. I also trimmed the inside edges of the trusses & gussets. I will start making the inner boxing plates & the end transition pieces next time I head to the shop. This should make things as strong as stock.....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 04-15-2010 at 01:26 AM. |
![]() |
![]() |
![]() |
#9 |
I'M TRUCK CRAZY!
Join Date: Oct 2006
Location: Sachse, TEXAS
Posts: 1,737
|
Re: Project: Recycle
Very cool!
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,967
|
Re: Project: Recycle
Got after it again today! I rarely get multiple days w/several hours of work time. They killed the power to our plant yesterday to install an upgraded transformer so we got out a little early. Since power was out yesterday, today was slow as we played catch up. So I took advantage & bolted early again today.
I got both sides completely welded & started the clean-up grinding on the driver side. I'll mount the bed floor again asap just to make 100% sure nothing interferes (nothing should). Prob won't get much time on it this weekend since I hope to be helping a fellow board member (Jonboy) drop his truck on my 'free day'. Pics, pics, & more pics.....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 04-18-2010 at 10:25 AM. |
![]() |
![]() |
![]() |
#11 |
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: Project: Recycle
Looks bullet proof Scot. You do great work, and using the donor frame was a great idea! A textbook example of form following function.
Now you can still use your truck, like a truck, without worrying about a weakened frame. Neat Stuff! ![]() [FEA (Finite Element Analysis) models shown below showing the effect of Scot's modifications to frame strength safety factor] Last edited by lakeroadster; 04-16-2010 at 10:27 AM. |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jul 2003
Location: Plano
Posts: 83
|
Re: Project: Recycle
Very impressive, looks even better than what I had pictured in my head. Let me know when you want to try the bed floor.
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Sep 2005
Location: Bentonville, AR
Posts: 190
|
Re: Project: Recycle
great work and definitelt keep the pix coming. your work is great and i really like the step notch idea. i'm putting that on the list of things to do.....
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,967
|
Re: Project: Recycle
Not much done but some pics anyway. We threw the bed floor on & one wheel to make sure things cleared as expected....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#15 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Project: Recycle
Nice. That cleaned up well and looks great!
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#16 |
Under Construction
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
|
Re: Project: Recycle
Nice work Scoti
__________________
Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,967
|
Re: Project: Recycle
I picked up a couple of parts @ the Pate swap meet this weekend that were needed. I got the BBW sheet metal needed to get the conversion process under way.
I got the bulk of a rear cab section & whittled it down to a more manageable size. From there it was the drill, pry, & split routine (over & over.... & over again ![]() I hope to get started on removing the small window sheet metal this week & my buddy has cleared a spot in his shop to get some fresh interior color sprayed....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: Project: Recycle
Cool!!!
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#19 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: Project: Recycle
Nice can't wait to see the BBW install!
__________________
-Nate ![]() 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
![]() |
![]() |
![]() |
#20 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Project: Recycle
I suppose I am just a pervert from way back, but BBW means something completely different to me.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#21 |
1965 Chevy C10, 2005 4.8L/4l60
![]() Join Date: Aug 2004
Location: DFW Texas
Posts: 8,541
|
Re: Project: Recycle
![]() ![]() ![]() ![]() That's funny right thar, I dont care who you are, that's funny!
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 ![]() ![]() ![]() support our troops! Last edited by Clyde65; 05-03-2010 at 02:49 PM. |
![]() |
![]() |
![]() |
#22 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Project: Recycle
I'm just saying if you do a google search on BBW you will find what I'm more familiar with and it doesn't mention old truck windows anywhere.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,967
|
Re: Project: Recycle
Hhmm.... Is it just me, or does TX seem to know an awful lot about this 'other' BBW definition?? For some people, "way back" means last week when the bar closed on Sat night
![]()
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#24 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Project: Recycle
Hey I'm an old chubby chaser from way back.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#25 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Re: Project: Recycle
I think your sharing a bit too much Kevin...
![]()
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
Bookmarks |
|
|