The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-08-2022, 10:31 AM   #1
bigmoe
Registered User
 
bigmoe's Avatar
 
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 963
Re: 5.3 into 72

You should make a filler piece for the opening on the front of your engine cover.
Have you had a chance to drive it? How do you like the new cam?
Attached Images
 
bigmoe is offline   Reply With Quote
Old 01-08-2022, 09:21 PM   #2
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

I got it started and did some data logging. Sent the file to my tuner and I’m waiting for an updated file. I wasn’t able to really open it due to the tune not being dialed in. As for the engine cover. I shaved another intake to put on so I could get rid of it. Come to find out I put all that time in for nothing but the experience. I didn’t realize I had picked up a square port intake. I have cathedral ports. Btw your cover does look good with it filled.
jessemthompson is offline   Reply With Quote
Old 02-26-2022, 09:35 AM   #3
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

New idle clip with the BTR TRUCK NORRIS cam.

https://youtu.be/OuorqPhfocQ
jessemthompson is offline   Reply With Quote
Old 09-11-2023, 05:43 PM   #4
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

Finally got around to building a custom intake and airbox for my swap. Now I feel like my swap looks complete.
Attached Images
   
jessemthompson is offline   Reply With Quote
Old 09-11-2023, 06:54 PM   #5
bigmoe
Registered User
 
bigmoe's Avatar
 
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 963
Re: 5.3 into 72

Looks good. Not many make the effort to properly isolate the intake from the engine bay heat.
bigmoe is offline   Reply With Quote
Old 09-12-2023, 08:25 AM   #6
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,930
Re: 5.3 into 72

Nice ride. I'm copying your gas tank idea.
What radiator are you currently using, and do you like it?
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 09-12-2023, 02:10 PM   #7
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

I have a factory replacement radiator
jessemthompson is offline   Reply With Quote
Old 09-13-2023, 08:01 AM   #8
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,930
Re: 5.3 into 72

Quote:
Originally Posted by jessemthompson View Post
I have a factory replacement radiator
Thanks. I'll be needing one soon, my old copper one is done.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 09-12-2023, 09:17 PM   #9
LS short box
Registered User
 
Join Date: Jun 2015
Location: Carlos MN
Posts: 1,979
Re: 5.3 into 72

Just my .02 but a generic LS swap radiator makes the radiator hose routing a bit cleaner since the inlet and outlet are on right side of the radiator. On my 68 I ran a AFCO generic LS radiator. Biggest I could fit. Didn't have a any cold air but it is a good idea.
Attached Images
 
LS short box is offline   Reply With Quote
Old 09-13-2023, 08:02 AM   #10
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,930
Re: 5.3 into 72

Quote:
Originally Posted by LS short box View Post
Just my .02 but a generic LS swap radiator makes the radiator hose routing a bit cleaner since the inlet and outlet are on right side of the radiator. On my 68 I ran a AFCO generic LS radiator. Biggest I could fit. Didn't have a any cold air but it is a good idea.
That looks great, but I'm running the factory airbox, so no go for me.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 09-13-2023, 09:30 PM   #11
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

Quote:
Originally Posted by LS short box View Post
Just my .02 but a generic LS swap radiator makes the radiator hose routing a bit cleaner since the inlet and outlet are on right side of the radiator. On my 68 I ran a AFCO generic LS radiator. Biggest I could fit. Didn't have a any cold air but it is a good idea.
I ran two aluminum LS swap radiators. They both only lasted one year. Electrolysis killed them both. With the cost and only lasting a year I gave up and went with a stock radiator. This one has been in for 3 years and hasn’t had any issues.
jessemthompson is offline   Reply With Quote
Old 09-13-2023, 09:40 PM   #12
MySons68C20
Senior Member
 
MySons68C20's Avatar
 
Join Date: Sep 2014
Location: Wenatchee, Wa
Posts: 904
Re: 5.3 into 72

Zinc anode is your friend..I have no issues after 7 years with the aluminum radiator using the anode plug in place of the petcock.
MySons68C20 is offline   Reply With Quote
Old 09-13-2023, 09:59 PM   #13
bigmoe
Registered User
 
bigmoe's Avatar
 
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 963
Re: 5.3 into 72

I'm trying a cap with an anode attached.
Attached Images
 
bigmoe is offline   Reply With Quote
Old 09-14-2023, 12:31 PM   #14
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

After the first one I got a petcock with the anode. I had the same results. After that I was done spending so much on radiators. The stock one cools just as well as aftermarket aluminum ones. I’m not spending that much money over an upper radiator hose. My truck is my daily, so I go with what works.
jessemthompson is offline   Reply With Quote
Old 10-15-2023, 08:56 PM   #15
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

I finally got a decent engine cover for my swap. I also swapped my transmission this morning for one that doesn’t grind 3rd gear anymore. I’m looking to start doing some bodywork for my winter projects.
Attached Images
  
jessemthompson is offline   Reply With Quote
Old 10-16-2023, 11:21 AM   #16
rodstored-72
chevy truck fan
 
rodstored-72's Avatar
 
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,979
Re: 5.3 into 72

looks nice jessie, I am looking for info on air intake systems for my GEN IV and '86 SWB. I would like to know what specifically you used to make up your air intake system & where you purchased it? ...if willing to share.

thanks!
rodstored-72 is offline   Reply With Quote
Old 10-16-2023, 11:45 AM   #17
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

The tubing I used was Airaid AIR-100-400 UBI that I bought on Amazon. The airbox I fabricated using sheet metal and plexi glass for the top. I built a template out of cardboard and went from there.
jessemthompson is offline   Reply With Quote
Old 10-16-2023, 05:02 PM   #18
LS short box
Registered User
 
Join Date: Jun 2015
Location: Carlos MN
Posts: 1,979
Re: 5.3 into 72

Couple of things.
I purchase the intake hoses from a place called Intakehose.com.
In regards to the LS alum radiator in my 98 Wrangler with a LS6/4L60E combo has 15 years on it with zero issues. I bought it from Novak Adapt out of Logan UT. I believe they were built at the time by Griffin.
IMHO many alum radiators fail is because of the the way they are mounted. I like securing the radiator top and bottom with rubber mounts like they did from the factory. Not "L" brackets welded to the radiator tanks.
Attached Images
 
LS short box is offline   Reply With Quote
Old 11-14-2023, 08:59 PM   #19
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

Just installed some new valve covers with coil covers. Trying to pull everything in the engine compartment together.
Attached Images
  
jessemthompson is offline   Reply With Quote
Old 12-18-2023, 11:46 AM   #20
EagleChief
Registered User
 
EagleChief's Avatar
 
Join Date: Sep 2016
Location: Tulsa, OK
Posts: 410
Re: 5.3 into 72

It's been nice following your swap. I like that engine cover you added.

I'm envious of the time that a lot of you have to get your projects finished. I took delivery of my 5.3 a little over 3 years ago. I want to finish it up and drive the thing again.
__________________
1971 C10 - Hugger Orange/White

My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=780197

LS Swap Thread: https://67-72chevytrucks.com/vboard/...d.php?t=811460
EagleChief is offline   Reply With Quote
Old 12-23-2023, 08:40 PM   #21
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

I’ve had my truck since 2011 and started the swap in 2015. It’s taken time to get it to this point and probably many more years to get it where I want it. Take your time and enjoy your truck.
jessemthompson is offline   Reply With Quote
Old 12-30-2023, 01:01 PM   #22
kev2809
low n' slo
 
kev2809's Avatar
 
Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,143
Re: 5.3 into 72

I've had my truck since 2009 and still ain't done lol. happens to all of us
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread

-_--_--_ _________
_--_-_ -/____|__|__\__
,.,,,.,.,,.,|_O _______ O_]
kev2809 is offline   Reply With Quote
Old 02-18-2024, 10:27 AM   #23
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 957
Re: 5.3 into 72

I did a little shortening of my upper radiator hose and added a set of radiator filler panels.
Attached Images
  
jessemthompson is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com