Daverods project 66 - Page 99 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daverod · 04-27-2011, 11:38 PM

Yes I got one fron Capt.

Strodder · 04-27-2011, 11:46 PM

Did it look like this?

Posted via Mobile Device

Strodder · 04-27-2011, 11:50 PM

Can't post picture?? Still learning my droid x

Posted via Mobile Device

daverod · 04-27-2011, 11:52 PM

I think the problem is because I pancaked my crossmember. It raised my arms up 1 1/2".

watahyahknow · 04-28-2011, 12:54 AM

you might need to add 2 extra joints in the steering now

**Captainfab** · 04-28-2011, 01:28 AM

Yep, that is why. I didn't stop to think that would be a problem. Is the upper arm hitting the steering shaft hard, or just a little?

Quote:

Originally Posted by daverod

I think the problem is because I pancaked my crossmember. It raised my arms up 1 1/2".

watahyahknow · 04-28-2011, 03:11 AM

in other words if you can put a notch in the upper arm or change it to a tubular arm to clear the steering

daverod · 04-28-2011, 09:33 AM

Seems to be hitting it hard.

I have'nt really mounted the steering column.

I really don't want tube arms. I was looking for some pictures of how guys added a couple links. Could find any. I know I've seen some. I think they were for doing R&P though. Not to many people with pancaked stuff. I would say the shaft hits into the arm about 3/4 to an 1".

daverod · 04-28-2011, 09:54 AM

OK maybe it hit more. It would be a big notch.

At full up it touches. Last few are full down. Maybe a notch and a link? There does'nt seem to be a lot of room. Maybe zig it over to above the frame then back? or zig it up?

Strodder · 04-28-2011, 10:02 AM

Looks like you will have to do something like this. I'm a Borgenson Dealer if you need anything.

daverod · 04-28-2011, 10:10 AM

2 ujoints and a support bearing should do it.and a coupler. Pm me a price. No rush. or what ever you think I need. I knew I was being nice to you for a reason.

Strodder · 04-28-2011, 10:55 AM

Bite me.

You have PM

ruffrida2005 · 04-28-2011, 03:10 PM

This is what you need right here. http://www.c10forum.com/forum/showth...ghlight=Jeebus

daverod · 04-28-2011, 03:11 PM

That's it no more mister nice guy.

I'm going to be on Americia's funniest videos this Sunday.

A minute to win it. Set your DVR. If I win I'll give you $10.

daverod · 04-28-2011, 03:15 PM

Quote:

Originally Posted by ruffrida2005

This is what you need right here. http://www.c10forum.com/forum/showth...ghlight=Jeebus

Looks like $$$$

ruffrida2005 · 04-28-2011, 03:27 PM

There only $199 I think for the uppers, powder coated with ball joints for right now.

watahyahknow · 04-28-2011, 06:00 PM

those a arms look nice .......... wat you could try is raise the steeringbox using a realy thick and strong adapterplate that bolts intoo the original boldholes of the chassis and has studs to mount the box higher up doing it that way alows you to return to stock if this doesnt work .
it might even correct the steering geometry as you allready raised everything up the chassis that comes after the steeringbox ...... that is as long as the steeringrods and stuff comming of the box still clears the underside of the chassis after the raising

SCOTI · 04-28-2011, 06:13 PM

You can use a smaller diameter shaft & gain some clearance. That tube over shaft collapsible arrangement can be swapped for a 3/4" shaft. You'll still have to also raise it up slightly w/a support bearing & some u-joints w/the 1.5" notched x-member.

With my 1 1/8" notched/sectioned/pancaked x-member using OE arms, I cleared w/the smaller dia shaft (standard aftermarket 3/4" DD shaft). It only made contact w/zero air pressure.

ruffrida2005 · 04-28-2011, 06:46 PM

I say go with the MMW arms I posted. They will look cool as hell. I have his uppers for my s10.

daverod · 04-28-2011, 06:51 PM

Their web site doesn't work. Cant you get those arms w/ a stock ball joint?

ruffrida2005 · 04-28-2011, 07:26 PM

give his company a call, And yes you can get them with stock ball joints. He is rebuilding his site so that's why it's messed up.

daverod · 04-30-2011, 03:19 PM

Got my $hit jack up last night.

Raised everything 1". Everything clears. Well except for the steering shaft. Dont know ? Can I just cut the shaft to make it shorter or does it need splines in the end. The way it is now I don't think I have enough room to move it much.

Strodder · 04-30-2011, 06:52 PM

Hey Dave your idler arm should be the same angle as your pitman arm. Your going to be all jacked up.

daverod · 05-01-2011, 12:53 AM

How do you know I did'nt raise it too.

Strodder · 05-02-2011, 01:21 PM

Quote:

Originally Posted by daverod

How do you know I did'nt raise it too.

I was just looking out for you. People need to know that. So stop being so lazy and post more pictures of everything you do. Or should I say almost everything you do. Some things should be kept to yourself.

04-27-2011, 11:38 PM	#2451
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Yes I got one fron Capt. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-27-2011, 11:46 PM	#2452
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Did it look like this? Posted via Mobile Device __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-27-2011, 11:50 PM	#2453
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Can't post picture?? Still learning my droid x Posted via Mobile Device __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-27-2011, 11:52 PM	#2454
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I think the problem is because I pancaked my crossmember. It raised my arms up 1 1/2". __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-28-2011, 12:54 AM	#2455
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 you might need to add 2 extra joints in the steering now __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

04-28-2011, 03:11 AM	#2457
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 in other words if you can put a notch in the upper arm or change it to a tubular arm to clear the steering __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 04-28-2011 at 03:11 AM.

04-28-2011, 09:33 AM	#2458
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Seems to be hitting it hard. I have'nt really mounted the steering column. I really don't want tube arms. I was looking for some pictures of how guys added a couple links. Could find any. I know I've seen some. I think they were for doing R&P though. Not to many people with pancaked stuff. I would say the shaft hits into the arm about 3/4 to an 1". __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-28-2011 at 09:39 AM.

04-28-2011, 09:54 AM	#2459
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 OK maybe it hit more. It would be a big notch.At full up it touches. Last few are full down. Maybe a notch and a link? There does'nt seem to be a lot of room. Maybe zig it over to above the frame then back? or zig it up? Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-28-2011 at 09:58 AM.

04-28-2011, 10:02 AM	#2460
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Looks like you will have to do something like this. I'm a Borgenson Dealer if you need anything. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 04-28-2011 at 10:04 AM.

04-28-2011, 10:10 AM	#2461
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 2 ujoints and a support bearing should do it.and a coupler. Pm me a price. No rush. or what ever you think I need. I knew I was being nice to you for a reason. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-28-2011 at 10:14 AM.

04-28-2011, 10:55 AM	#2462
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Bite me. You have PM __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 04-28-2011 at 10:55 AM.

04-28-2011, 03:10 PM	#2463
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 This is what you need right here. http://www.c10forum.com/forum/showth...ghlight=Jeebus __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-28-2011, 03:11 PM	#2464
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 That's it no more mister nice guy. I'm going to be on Americia's funniest videos this Sunday. A minute to win it. Set your DVR. If I win I'll give you $10. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-28-2011 at 03:13 PM.

04-28-2011, 03:27 PM	#2466
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 There only $199 I think for the uppers, powder coated with ball joints for right now. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-28-2011, 06:00 PM	#2467
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 those a arms look nice .......... wat you could try is raise the steeringbox using a realy thick and strong adapterplate that bolts intoo the original boldholes of the chassis and has studs to mount the box higher up doing it that way alows you to return to stock if this doesnt work . it might even correct the steering geometry as you allready raised everything up the chassis that comes after the steeringbox ...... that is as long as the steeringrods and stuff comming of the box still clears the underside of the chassis after the raising __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 04-28-2011 at 06:02 PM.



Register or Log In To remove these advertisements.

04-28-2011, 06:13 PM	#2468
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,039	Re: Daverods project 66 You can use a smaller diameter shaft & gain some clearance. That tube over shaft collapsible arrangement can be swapped for a 3/4" shaft. You'll still have to also raise it up slightly w/a support bearing & some u-joints w/the 1.5" notched x-member. With my 1 1/8" notched/sectioned/pancaked x-member using OE arms, I cleared w/the smaller dia shaft (standard aftermarket 3/4" DD shaft). It only made contact w/zero air pressure. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-28-2011, 06:46 PM	#2469
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 I say go with the MMW arms I posted. They will look cool as hell. I have his uppers for my s10. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-28-2011, 06:51 PM	#2470
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Their web site doesn't work. Cant you get those arms w/ a stock ball joint? __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-28-2011, 07:26 PM	#2471
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 give his company a call, And yes you can get them with stock ball joints. He is rebuilding his site so that's why it's messed up. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-30-2011, 03:19 PM	#2472
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Got my $hit jack up last night. Raised everything 1". Everything clears. Well except for the steering shaft. Dont know ? Can I just cut the shaft to make it shorter or does it need splines in the end. The way it is now I don't think I have enough room to move it much. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-30-2011, 06:52 PM	#2473
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Hey Dave your idler arm should be the same angle as your pitman arm. Your going to be all jacked up. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

05-01-2011, 12:53 AM	#2474
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 How do you know I did'nt raise it too. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

Register or Log In To remove these advertisements.