![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
CRGRS 66 Winter Build Thread
CRGRS 66 Winter Build Thread
I waited many tears to be able to buy this truck, and finally this past March I realized my dream. Up until this spring it was just that, a dream. My father passed last December, he was 84. His was a life well lived, a great man to have for a father. My Mom passed away 10 years ago as well, so this truck is being built in honour of both my parents. As I had waited so many years, part of my criteria when purchasing this truck was something that was driveable right away, something that was mostly original, and something that was not rotting off its frame. I looked at so many trucks within a price range that worked for me. So many of the trucks I looked at had fresh paint which scared me. This truck did not have fresh paint, and the PO who owned the truck since 1986, claimed that he never painted it. Judging by the condition of the finish, it sure looked like a paint job that was at least 25 years old. The upside I saw in this was that the body was in exceptional condition. There appeared to be very little rust beyond the surface rust. From some of the prices I see you guys paying for some of the trucks I have seen joining the forum since I joined, I believe I may have over paid, but at the end of the day my truck appraised for quite a bit more than I paid, so I feel good about it. Everyone who sees my truck for the first time has that look of astonishment on their face. They cannot believe how solid it is. I absolutely love my truck, I could stare at it all day long. The other thing is that, again, after waiting so long, I want to drive it. I want to drive it every summer. That is the reason for the thread title. Whatever I take on this winter, my plan is to get it back on the road, and enjoy it again next summer. So, here is my list for this winter, what I hope to get done. 1. Front disc brakes, c/w booster, 2.5 drop spindles, 2 lowering springs, and new brake lines 2. Porterbuilt stage 2 bag and shock kit. 3. I have a Camaro 5 speed lined up, with an S10 tail shaft. 4. 350 crate engine, way too pricey to rebuild the 283 sadly 5. HEI 6. Power steering 7. AC, undecided if I will use a salvaged original system, or a new aftermarket system 8. Wiring Harness, everything I have read tells me that the AAW set is worth the money 9. Reupholster seat (outsource), found a guy who is good, and not greedy 10. Refurbish and paint the column, and deluxe wheel that I picked up. 11. Sound deadening of the cab, carpet, and paint interior. 12. Restore gauge cluster, adding a tach, and maybe a clock on the other side 13. New front window seal I will have completion by late spring on my agenda. I want to be back on the road driving by the end of May 2013 at the latest. Should be fun considering I am also coaching 2 hockey teams! Wish me luck! Motivate me men!
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 Winter Build Thread
Here are a couple more pictures that are more recent...
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2012
Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A.
Posts: 1,081
|
Re: CRGRS 66 Winter Build Thread
Wow!
Looks pretty sweet, but obviously a little outdated. What a great specimen to start with. Killer ride!
__________________
My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 Winter Build Thread
Thanks Modge, here are a few pics that are a little more recent. I copied the first pics from the ad on carsforsale.com, they were from March of this year.
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
|
Re: CRGRS 66 Winter Build Thread
Go Craig, Go!!!!!
Sounds like you've got a great game plan. I'd get the hockey teams involved in the teardown and clean-up. Just tell them it's a "Character Building" exercise to promote teamwork.
__________________
Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527 |
![]() |
![]() |
![]() |
#6 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: CRGRS 66 Winter Build Thread
First of all I’m one of the many fans that think your truck is one of the nicest on the forum. Sounds like you have a great plan. Looking forward to seeing the improvements in the spring!
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Mar 2011
Location: Tucson, Arizona
Posts: 2,073
|
Re: CRGRS 66 Winter Build Thread
That is a VERY nice truck. What a great find. Good luck with your winter project.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Sep 2011
Location: Tacoma, WA
Posts: 2,425
|
Re: CRGRS 66 Winter Build Thread
Awesome start you have there CRGRS !!
After this past year of you posting on my build, it will be fun to return in kind !! Hope your garage has a good heater !!
__________________
Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Feb 2011
Location: muskogee, ok
Posts: 1,091
|
Re: CRGRS 66 Winter Build Thread
nice man cant wait to see how that turns out!!
__________________
![]() bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918 |
![]() |
![]() |
![]() |
#10 |
UCA63
Join Date: Aug 2005
Location: Lloydminster AB Can.
Posts: 1,637
|
Re: CRGRS 66 Winter Build Thread
Awesome starting point Craig!
The black with the white just oozes class..."bowtie" comes to mind(pun intended) In pic #2,is that a keyhole in the trim line below the fuel fill ?? Don't forget about the increased space you'll need to go with HEI. I'm really looking forward to following your progress this winter. Trent
__________________
member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d) |
![]() |
![]() |
![]() |
#11 |
Senior Member
![]() Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
|
Re: CRGRS 66 Winter Build Thread
what a great find... that thing is drop-dead...
i like your plan, its very achieveable. |
![]() |
![]() |
![]() |
#12 | ||||||
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 Winter Build Thread
Quote:
Quote:
Quote:
Quote:
![]() Thanks coulter Quote:
Quote:
To all, I have been debating as to whether to keep the factory colour scheme, you guys just made up my mind. I have to say that Chevy got this one right on the colour combo!
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 Last edited by CRGRS 66; 10-09-2012 at 08:39 AM. |
||||||
![]() |
![]() |
![]() |
#13 |
UCA63
Join Date: Aug 2005
Location: Lloydminster AB Can.
Posts: 1,637
|
Re: CRGRS 66 Winter Build Thread
yes,The HEI dist. and cap are larger than a points dist.
Unless you're going with a conversion type HEI that fits inside or an aftermarket one altogether. Just a thought before you install trans xm and order driveshafts. It's as easy as using the forward holes in your framerail as opposed to the rear ones. T
__________________
member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d) |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 Winter Build Thread
Trent, when you speak of space for HEI, do you mean that I will have interference with the firewall, air cleaner??? The parts yards around here are bandits, and they don't keep anything that isn't current, so I most likely will go aftermarket on the HEI.
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Feb 2011
Location: muskogee, ok
Posts: 1,091
|
Re: CRGRS 66 Winter Build Thread
ya im pretty sure you would have to clearance the firewall to be able to get the dizzy in and out. im using the front set of holes on mine and i got alot of room though
__________________
![]() bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918 |
![]() |
![]() |
![]() |
#16 |
Senior Member
![]() Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
|
Re: CRGRS 66 Winter Build Thread
[QUOTE=63sbssbbw;5637172]yes,The HEI dist. and cap are larger than a points dist.
Unless you're going with a conversion type HEI that fits inside or an aftermarket one altogether. i've had good luck with the mallory uni-lite distributor. its electronic but not hei. it is a smaller size much like the original. but be sure you always carry an extra modulator in the glove box. |
![]() |
![]() |
![]() |
#17 |
UCA63
Join Date: Aug 2005
Location: Lloydminster AB Can.
Posts: 1,637
|
Re: CRGRS 66 Winter Build Thread
Yes at the firewall
The air cleaner should be fine,its not like you need a drop base for hood clearance LOL As Coulter and Clem have suggested..you have numerous choices/decisions to make. Just wanted you to be aware of that so you don't have to say WTF near the end T
__________________
member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d) |
![]() |
![]() |
![]() |
#18 | |||
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 Winter Build Thread
Quote:
Quote:
Quote:
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
|||
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 Winter Build Thread
I got two things accomplished today. I ordered the porterbuilt stage 1 rear kit. Just the bags, upper and lower bag brackets, shocks, the upper and lower shock relocate brackets, and hardware as well as the porterbuilt adjustable trac-bar. The other thing I accomplished was another drive.
Trying to place an order with Justin @ Scott's Hot Rods as well, but he did not return my email or phone call today... Have an order to place with Classic Parts and with LMC as well.
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 Winter Build Thread
One more thing accomplished yesterday... got my order for CPP parts on the go, should ship out this week, I should see it here in about 2 weeks time.
6 lug drop spindle disc brake kit, MC booster prop valve, front and rear sway bars, front 2" drop springs shocks, and shock mount reinforce brackets. Need to get some dismantling done...
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Mar 2009
Location: Daphne, Al
Posts: 1,120
|
Re: CRGRS 66 Winter Build Thread
Nice. Subscribed
__________________
1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653 |
![]() |
![]() |
![]() |
#22 |
chevy only
![]() Join Date: Sep 2006
Location: Phoenix, AZ
Posts: 6,619
|
Re: CRGRS 66 Winter Build Thread
VERY COOL TRUCK!!
![]()
__________________
CHEVY ONLY... Nothin Else ! |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 Winter Build Thread
thanks greg
thanks DINO I hope I don't dissapoint, no plans to drag sheet metal and scrape paint... This will be a mostly original looking hot rod
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#24 |
UCA63
Join Date: Aug 2005
Location: Lloydminster AB Can.
Posts: 1,637
|
Re: CRGRS 66 Winter Build Thread
Sweeet...christmas in October
T
__________________
member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d) |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 Winter Build Thread
Indeed, porterbuilt stuff is 4-5 weeks away mind you, but should see CPP goods in a couple of weeks. Also about to pull the trigger on a crate 350 from the local GM dealer, they came through on price!!!
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
Bookmarks |
|
|