Hydroboost Mounting Plates

[engairuph]

I would like a hydrobooster plate and booster plate adaptor for 69 K-10

[Captainfab]

I will send you a PM with ordering and payment info.

Originally Posted by engairuph

I would like a hydrobooster plate and booster plate adaptor for 69 K-10

[caddyfront]

I would like a Hydro booster mounting bracket and a adapter plate for a 68 gmc c1500
Posted via Mobile Device

[Captainfab]

I'll send you a PM with ordering info.

Originally Posted by caddyfront

I would like a Hydro booster mounting bracket and a adapter plate for a 68 gmc c1500
Posted via Mobile Device

[bill92250]

If anybody has a hydroboost nut socket they would lend, rent or sell, PM me.

[Captainfab]

I replied to your PM. I sold my last one 2 days ago. I should have some more in a couple weeks.

Originally Posted by bill92250

If anybody has a hydroboost nut socket they would lend, rent or sell, PM me.

[Curtb1971]

Hey Captian,
I'm doing an astro van hydro boost swap into my 71' chevy truck and I'm needing your mounting plate but I want to mount the plate directly to the studs coming out of the firewall. I'll have to enlarge the hole but the only issue I forsee is the factory studs are offset to the hole in the firewall. Is there anyway you could fab up one of the with the center keyed hole offset lower on the plate. I don't need the mounting holes punched and raw steel is fine.
Thanks, Curt

[cru_zn_29]

The 66 has a 70 power brake unit installed 20 years ago so your plate should use the same mounting.

[Captainfab]

OK, just as long as you understand that it won't be bolted up correctly to your '66's firewall and pedal bracket.

Originally Posted by cru_zn_29

The 66 has a 70 power brake unit installed 20 years ago so your plate should use the same mounting.

[cru_zn_29]

I see what you are saying now that i have removed the old booster.So i will not need your hydroboost plate.
Thanks Kenny

[Captainfab]

You could always convert to hydroboost using the correct booster bracket and this hydroboost mounting plate.

Originally Posted by cru_zn_29

I see what you are saying now that i have removed the old booster.So i will not need your hydroboost plate.
Thanks Kenny

[Captainfab]

I have the hydroboost nut sockets back in stock.

[rustyrexiusrodz]

I would like to order a bracket for a 1962 truck thanks

[Captainfab]

I'll sent you a PM with ordering info.

Originally Posted by rustyrexiusrodz

I would like to order a bracket for a 1962 truck thanks

[62LS1]

I need the information on ordering the 67-72 bracket (powdercoated) and the hydroboost bracket. Send the info to vratman@sbcglobal.net

[Captainfab]

Email sent.

Originally Posted by 62LS1

I need the information on ordering the 67-72 bracket (powdercoated) and the hydroboost bracket. Send the info to vratman@sbcglobal.net

[2tontruck]

I will need the bracket and plate as well for my 72 Suburban. Please message me and let me know if you have this in stock. I will paint it. Thanks Scott

[The Rocknrod]

Would a 94 Chevrolet K3500 Diesel Hydroboost work with your mounting plate?: http://www.cardone.com/Products/Prod...=527334&p=rock
and
http://www.rockauto.com/dbphp/x,carc...e_Booster.html

[Captainfab]

Yes it will work.

Once you remove the factory mounting bracket all GM hydroboosts are interchangeable.

Originally Posted by The Rocknrod

Would a 94 Chevrolet K3500 Diesel Hydroboost work with your mounting plate?: http://www.cardone.com/Products/Prod...=527334&p=rock
and
http://www.rockauto.com/dbphp/x,carc...e_Booster.html

[Theboatandcarman]

i want a hydroboost bracket and i guess a power brake bracket for my 72 cab! black powdercoating if available please. doing a complete setup from a chevy 2500HD (hydroboost and master cylinder)

[Captainfab]

I will send you a PM with ordering and payment info.

Originally Posted by Theboatandcarman

i want a hydroboost bracket and i guess a power brake bracket for my 72 cab! black powdercoating if available please. doing a complete setup from a chevy 2500HD (hydroboost and master cylinder)

[DaddyOh]

Need Paypal info for a hydroboost mounting plate...

[solidaxel]

I will be converting my 62 Corvette to Hydroboost so will your bracket fit the firewall mounting bolts where the stock M/C is located?
Here is the HB unit I am using, it came from a 2000 ford GT so I guess I will need the Nut removal tool also, what else will I need?

[Captainfab]

Sorry but I have no idea what the firewall hole pattern is for the master cylinder on a '62 Vette. If by chance it was the same as these hydroboost mounting plates, you would still have to enlarge the center hole a bit. These plates are intended to be used with my booster brackets so that no modification to the firewall is necessary. that also maintains a good solid connection between the booster/master and the pedal bracket as GM designed it to be.

Originally Posted by solidaxel

I will be converting my 62 Corvette to Hydroboost so will your bracket fit the firewall mounting bolts where the stock M/C is located?
Here is the HB unit I am using, it came from a 2000 ford GT so I guess I will need the Nut removal tool also, what else will I need?

[solidaxel]

Thanks,
I will wait until I get the car back and take some measurements and pics.