Desktop Dyno Please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Eagle1 · 10-02-2002, 09:30 PM

Could someone desktop dyno this combo for me.

350 SBC, .030 overbore
10:1 Flattop pistons
76cc stock heads, 9.5:1 compression
1.94int./1.50exh. valves
Cam Comp Cams XE256 12-234-2 with 212/218 degrees of duration, .447/.454" of lift, 256/268 degrees of advertised duration, and 110 degrees of lobe seperation
HEI distrbutor
Edelbrock Preformer intake
Carter Carb, 600cfm
Stock Exhaust Manifolds
2.25" dual exhaust with dynomax mufflers

Thanks
And is there anything else I could do to make it have more power.
Eagle

10-02-2002, 09:30 PM	#1
Eagle1 Registered User Join Date: Sep 2002 Location: SLC, UT Posts: 13	Desktop Dyno Please Could someone desktop dyno this combo for me. 350 SBC, .030 overbore 10:1 Flattop pistons 76cc stock heads, 9.5:1 compression 1.94int./1.50exh. valves Cam Comp Cams XE256 12-234-2 with 212/218 degrees of duration, .447/.454" of lift, 256/268 degrees of advertised duration, and 110 degrees of lobe seperation HEI distrbutor Edelbrock Preformer intake Carter Carb, 600cfm Stock Exhaust Manifolds 2.25" dual exhaust with dynomax mufflers Thanks And is there anything else I could do to make it have more power. Eagle __________________ 77 C10 truck 355/TH350, 10:1 KB's, COMP XE256H, EDELBROCK PERFORMER, CARTER 600 CARB.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.