|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-02-2002, 11:14 PM
|
#1 |
|
someday
 
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
update on intermittent wipers
I did install the intermittent wiper switch in my 69 and got it working. I also checked the price on the switch at work it looks like $50 give or take some change. Heres some pics of how the install went.
I had the dash allready out so it was pretty easy to start. the switch is pretty big as you can see.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff Last edited by blue_69; 12-03-2002 at 05:03 PM. |
|
|
|
12-02-2002, 11:18 PM
|
#2 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
next i marked where the little square holes on the trim ring line up with the sheetmetal underneath and drilled them. Then I used taper head sheet metal screws and kinda countersunk the holes in the trim ring.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff Last edited by blue_69; 12-03-2002 at 05:04 PM. |
|
|
|
|
12-02-2002, 11:21 PM
|
#3 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
then i mounted the trim ring and drilled the hole to 1/4 in the original knob and put it on the new switch.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff Last edited by blue_69; 12-03-2002 at 05:04 PM. |
|
|
|
|
12-02-2002, 11:23 PM
|
#4 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
now for the wiring i drew up a schematic the wire colors match the wire colors on the new switch up to the relays. All in all i think it could be acomplished for around $60 - $75 maybe cheaper if you work at a place that sells the switches like i do.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff Last edited by blue_69; 12-03-2002 at 05:05 PM. |
|
|
|
|
12-02-2002, 11:31 PM
|
#5 |
|
Pronounced "Pew-al-up"
Join Date: Oct 2002
Location: Puyallup, Washington
Posts: 845
|
Man outstanding work!! That looks great, and fairly easy.
Are you going to sell the switches? I cant wait to install ojne!! 
__________________
Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos |
|
|
|
|
12-02-2002, 11:34 PM
|
#6 |
|
440 american Horses
Join Date: Mar 2001
Location: Anoka, MN USA
Posts: 470
|
what is the switch originally for?
__________________
Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America 
|
|
|
|
|
12-02-2002, 11:36 PM
|
#7 |
|
Senior Member
Join Date: Apr 2001
Location: Alexandria, MN
Posts: 1,462
|
that is very sweet... i folled your other post but just as a refresher what kinda switch is it again????
--mike
__________________
63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's |
|
|
|
|
12-03-2002, 12:00 AM
|
#8 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
cole hersee makes the switch www.colehersee.com. The one i have is out of a blue bird school bus. The only place that i can find that carries cole hersee switches are heavy truck and bus places. If you get a switch for something other than a blue bird the wiring may be different cole hersee has a bunch of switches that look identical but they are different. And yes i was thinking of putting together a kit of sorts but i have to see if i can get a little bit of a break on the switch prices. I will post when i know more about that.
jason
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
12-03-2002, 12:10 AM
|
#9 |
|
He's got mean nasty FANGS!
 
Join Date: Dec 1999
Location: Rockwell, NC
Posts: 6,512
|
Excellent info, I moved a copy of this to the FAQ board.
__________________
2004 K2500 Burb 1999 C3500 1985 Cutlass Supreme 1969 C-10 1967 C-10 Panel josh@67-72chevytrucks.com |
|
|
|
|
12-03-2002, 12:18 AM
|
#10 |
|
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
is there suppose to be pics??? on the main page it shows the little paper clip like icon to denote pics ... but when I open it, there arent any?
|
|
|
|
|
12-03-2002, 12:24 AM
|
#11 |
|
Account Suspended
Join Date: Jan 2000
Location: Woodstock, IL
Posts: 7,020
|
Uuuuummmmm, there was pics. . . .
|
|
|
|
|
12-03-2002, 12:27 AM
|
#12 |
|
Registered User
Join Date: Feb 2001
Location: USA
Posts: 2,613
|
Do you have the Cole-Hersee part # ?
Looks like I better buy some C-H stock tomorrow! |
|
|
|
|
12-03-2002, 12:35 AM
|
#13 |
|
He's got mean nasty FANGS!
Join Date: Dec 1999
Location: Rockwell, NC
Posts: 6,512
|
umm oops....... I guess when I copied the thread it kinda screwed up the pics.... Email the pics to me chevy69@grandecom.net and I'll edit the posts and re add them.
__________________
2004 K2500 Burb 1999 C3500 1985 Cutlass Supreme 1969 C-10 1967 C-10 Panel josh@67-72chevytrucks.com |
|
|
|
|
12-03-2002, 01:35 AM
|
#14 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,041
|
Greatttt. I'm going to check back tomorrow for the pics. Big thanks to blue_69.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
12-03-2002, 10:26 AM
|
#15 |
|
Spank 'em if you got 'em!
Join Date: Nov 2002
Location: Kansas City
Posts: 628
|
We Want Pics! We Want Pics!
Seriously though, I'll just check the FAQ board later. I was thinking about this awhile back when we had light rain, kept turning the wipers on and off. Thanks for the info.
__________________
Long Knight '71 C-20, 350ci, TH350, Edl. 1406 Carb w/elec.choke, Ignitor ignition, Viper Tires, Orange Dipstick |
|
|
|
|
12-03-2002, 11:24 AM
|
#16 |
|
Half a bubble off!
Join Date: Jun 2000
Location: Winfield, Ks, USA
Posts: 5,588
|
What is the part # for the switch?
__________________
Just call me LB.  '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads. |
|
|
|
|
12-03-2002, 11:49 AM
|
#17 |
|
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
I don't need intermittent, I just need REASONABLE!. Mine are so sloooooowww.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
|
|
|
|
12-03-2002, 05:17 PM
|
#18 |
|
someday
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
I updated this thread with the pics and also the thread in the FAQ's section. I planned to get more info on availability today but my friend in the parts dept. left early. If i can get some switches and relays for a reasonable price i will post them on the parts board. How much would you guys think is a fair price for this deal it looks like it will be somwhere between $50 - $75 for the whole deal relays all wired up and ready to plug in to you existing plug.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
|
|
12-03-2002, 05:48 PM
|
#19 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,041
|
blue_69, wired & ready to install @ up to 75$ sounds fair.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
12-03-2002, 05:55 PM
|
#20 |
|
computer illiterate
Join Date: Jan 2001
Location: Des Moines, IA
Posts: 6,446
|
ill take one
__________________
72 2wd blazer 72 swb 4x4 |
|
|
|
|
12-03-2002, 06:05 PM
|
#21 |
|
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
I would pay that for it.
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
|
|
|
|
12-03-2002, 11:08 PM
|
#22 |
|
Registered User
Join Date: Aug 2001
Location: Rocky Mount, MO
Posts: 1,293
|
Sign me up~!
|
|
|
|
|
12-03-2002, 11:16 PM
|
#23 |
|
Pronounced "Pew-al-up"
Join Date: Oct 2002
Location: Puyallup, Washington
Posts: 845
|
I would take one at that price!!
__________________
Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos |
|
|
|
|
12-04-2002, 01:24 PM
|
#24 |
|
Old Skool Club
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Are the relays internal to the switch? Or, are they additional items to be added and mounted? I am guessing that the "30" that you show for each relay is an amperage rating...is that correct? The numbers "85, 86 and 87" are all connections on the relays, right? So, all three are identical.
Boy, I sure do ask a lot of questions. Nice job on the schematic. It is plain enough for me, so everyone else should be able to understand it, too. I got a price on a switch today, of $60, from our bus parts supplier. I am guessing this is comparable to yours. I sure need to see the switch to compare the wiring coloration. You've been a help to lots of folks with this info!
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
|
|
|
|
12-04-2002, 01:35 PM
|
#25 |
|
Back in the sticks
Join Date: Jan 2001
Location: Fordland, MO
Posts: 3,188
|
Great work Blue! Thanks for you time and effort. This will aid all of us in getting the upgrades we desire. Jeff.
__________________
1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
