|
03-30-2011, 06:35 PM
|
#1 |
|
Just a car guy
Join Date: Feb 2006
Location: New Washington, IN
Posts: 991
|
Longer wheel studs?
Anyone know where I can find longer wheel studs for the rear on my 69?
.472"knurl 7/16"-20 Stock length is 1.5" I need 2"
__________________
1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig |
|
|
|
03-30-2011, 10:39 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Longer wheel studs?
napa
Go in with your info and they should be able to get them if they don't have them on hand |
|
|
|
|
03-31-2011, 09:27 AM
|
#3 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Longer wheel studs?
much better to take an old one with you the important part is to make sure the splined part is the same size
local autoparts store are a great source for common autorarts i prefer NAPA and CARQUEST as they normally have more knowelageble better trained(some even know how to read thru parts books) counter people from what i see most 7/16 are .480
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 03-31-2011 at 11:10 AM. |
|
|
|
|
03-31-2011, 10:52 AM
|
#4 |
|
Registered User
Join Date: Aug 2009
Location: Alden NY
Posts: 2,705
|
Re: Longer wheel studs?
If I remember correctly, and there is always the possibility that I do not, I couldn't find longer stock 7/16" studs with that knurl a couple of years ago. I had put some 1/4" spacers on to bring the wheels out a little and wanted longer studs as I had only about 5-6 turns of the lug nuts. Never found them and removed the spacers.
__________________
1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7 |
|
|
|
|
03-31-2011, 09:14 PM
|
#5 |
|
Registered User
Join Date: Jun 2005
Location: lawton ok
Posts: 25
|
Re: Longer wheel studs?
most parts stores around my area carry dorman studs. try this part # 610-157 the catalog says they are 3/8" to 1/2" LONGER
__________________
1970 chevy c10 305/th350 3.73 open p/s vintage air |
|
|
|
|
04-01-2011, 12:09 AM
|
#6 |
|
Just a car guy
Join Date: Feb 2006
Location: New Washington, IN
Posts: 991
|
Re: Longer wheel studs?
Thanks for the leads guys.
From what I have found, there is not a longer version in .472. Some guys on camaro sites said they used the .480 studs with little problems installing. The 610-187 appear to be .487 it's either longer studs or swap to 1" adapters. Posted via Mobile Device
__________________
1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig Last edited by OJ1988; 04-01-2011 at 12:16 AM. |
|
|
|
|
05-07-2018, 08:58 PM
|
#7 |
|
Registered User
Join Date: Jul 2013
Location: Austin, Texas
Posts: 349
|
Re: Longer wheel studs?
7 years old, but in case anyone is looking.
Moser makes a 7/16-20 .480 knurl. Part #8050 10x for $30 on amazon prime. |
|
|
|
|
05-07-2018, 09:37 PM
|
#8 | |
|
Registered User
 Join Date: Mar 2018
Location: Bakersfield, CA
Posts: 308
|
Re: Longer wheel studs?
Quote:
|
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
