What can be said about the 4-speed New Process NV833 overdrive manual transmission? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**hatzie** · 12-19-2015, 07:33 PM

Your best choice would be the OEM GM parts. Call your buddy in Bakersfield to see if he has the rod...
If you can't find em the Dodge truck pieces will probably work. The likelihood of the flat rectangular A833 3-OD lever being different is not high.

**Gregski** · 12-19-2015, 07:56 PM

Quote:

Originally Posted by hatzie

Your best choice would be the OEM GM parts. Call your buddy in Bakersfield to see if he has the rod...

LOL, trust me we searched the premises already, also it was his boys project so after they lost interest he sold the pieces to me, he never had the original 1982 truck this trans came off of, they were going to install it in their 1984 4x4 and convert it from automatic to manual, very ambitious task, that fizzled

**aotte1** · 12-19-2015, 11:57 PM

Looks nice, good luck with it. My '86 stepper came with one originally, and below are a couple of photos. I believe the shifter, boot, and knob to be original. Only thing I changed was the speedo cable seal, otherwise original. Have changed and upgraded the engine a little over time. No power shifting, however, works great once in gear and getting on it (400 HP/400Ft-LBS @ 5600RPM). The overdrive is very nice, with 3.73 gears. I like the 3.73 gears for first too, you can go slow in first if needed.

Keith Seymore · 12-22-2015, 11:25 AM

Quote:

Originally Posted by aotte1

My '86 stepper came with one originally, and below are a couple of photos. I believe the shifter, boot, and knob to be original.

Correct - your shifter, boot and knob are original (appearing) for '86 and '87.

K

12-19-2015, 07:33 PM	#1
hatzie Moderator Join Date: Oct 2008 Location: Wentworth, NH Posts: 4,916	Re: What can be said about the 4-speed New Process NV833 overdrive manual transmissio Your best choice would be the OEM GM parts. Call your buddy in Bakersfield to see if he has the rod... If you can't find em the Dodge truck pieces will probably work. The likelihood of the flat rectangular A833 3-OD lever being different is not high. __________________ 1959 M35A2 LDT465-1D SOLD 1967 Dodge W200 B383, NP420/NP201 SOLD 1969 Dodge Polara 500 B383, A833 SOLD 1972 Ford F250 FE390, NP435/NP205 SOLD 1976 Chevy K20, 6.5L, NV4500/NP208 SOLD 1986 M1008 CUCV SOLD 2000 GMC C2500, TD6.5L, NV4500 2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263 2009 Impala SS LS4 V8 RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials... 1973-1991 GM Light Truck Service, Unit/Overhaul, Wiring Manuals, Parts Books and Some 1968-1999 GM Service Training textbooks in PDF 1988-1998 GMT400 CK service manual project 1988-1993 GMT400 CK parts books. 1967-1972 GM Light, Medium, & Heavy Truck Service Manuals in PDF Please include at least the year and model in your threads. It'll be easier to answer your questions. And please let us know if and how your repairs were successful.

12-19-2015, 11:57 PM	#3
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: What can be said about the 4-speed New Process NV833 overdrive manual transmissio Looks nice, good luck with it. My '86 stepper came with one originally, and below are a couple of photos. I believe the shifter, boot, and knob to be original. Only thing I changed was the speedo cable seal, otherwise original. Have changed and upgraded the engine a little over time. No power shifting, however, works great once in gear and getting on it (400 HP/400Ft-LBS @ 5600RPM). The overdrive is very nice, with 3.73 gears. I like the 3.73 gears for first too, you can go slow in first if needed. Attached Images Last edited by aotte1; 12-20-2015 at 12:08 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.