63-87 rack and pinion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**robnolimit** · 05-20-2011, 12:01 PM

Next week (may 23-27) we will be posting up install picts of our new rack and pinion kit as it goes in. StreetTrucks will also be covering the install for an upcoming article. We are having the owner of the truck do the install himself, with an "out of the box" kit. These kits will go onsale starting June 1. Stay tuned for updates. Thanks.

Custom 68 · 05-20-2011, 03:32 PM

Awesome, I have also been waiting for some more info on your rear shock mounts and the long track bar you are showing on the JT project. I currently have adjustable shocks so I would be interested in a package deal without the shocks so I can use my QA1 shocks.
Thanks
David

**robnolimit** · 05-20-2011, 05:38 PM

on the way soon

chapster · 05-21-2011, 03:20 AM

Sounds good Rob,

I am to far along to use you kit but it is nice to see all the testing and R & D that is going into the new Rack & pinion kit before it is released.

**Hart_Rod** · 05-21-2011, 10:06 PM

Tempting......

.

POPO1984 · 05-24-2011, 09:37 AM

Impatiently waiting

inovermyhead · 05-24-2011, 10:55 AM

someone had to do it. Can't wait to see the pics posted up.

doubleRdazz · 05-26-2011, 08:19 PM

Looking forward to some pics
Posted via Mobile Device

gringoloco · 05-30-2011, 11:53 PM

Did this happen? Or...

dnd1978 · 05-31-2011, 07:38 PM

Rob,

Will your rack & pinion setup work on a crossmember that has been section 1.5''

thanks

**robnolimit** · 05-31-2011, 11:02 PM

Sorry, sorry, sorry, But, we wil post uo wed. I tried today, but our internet was down at the shop. pump and pulleys are on. First step done.

norwegianc10 · 06-02-2011, 03:47 AM

Subscribed

**rob32472** · 06-02-2011, 07:38 PM

nds1968 · 06-06-2011, 12:57 PM

doubleRdazz · 06-06-2011, 01:48 PM

Thought these were going to be ready for June 1st
Posted via Mobile Device

68GMCCustom · 06-06-2011, 02:20 PM

where y'all at on this Rob?
Do we have pricing and availability yet?

**robnolimit** · 06-07-2011, 03:57 PM

Jake (owner) installing the new p/s pump with a set of Bill's brackets.

**robnolimit** · 06-07-2011, 03:58 PM

p/s pump and pulley

**robnolimit** · 06-07-2011, 04:00 PM

Removing the outer tierod ends

**robnolimit** · 06-07-2011, 04:01 PM

Removing the stock steering box

**robnolimit** · 06-07-2011, 04:18 PM

Pulling out all of the stock steering

**robnolimit** · 06-07-2011, 04:20 PM

The stock steering shaft goes too.

**robnolimit** · 06-07-2011, 04:21 PM

Here is a shot of the main rack mounting brackets

**robnolimit** · 06-07-2011, 04:23 PM

The two lower 'fingers' set the height of the brackets. The first locating hole is dead center on the crossmember.

**robnolimit** · 06-07-2011, 04:25 PM

The production rack mount.

05-20-2011, 12:01 PM	#1
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	63-87 rack and pinion Next week (may 23-27) we will be posting up install picts of our new rack and pinion kit as it goes in. StreetTrucks will also be covering the install for an upcoming article. We are having the owner of the truck do the install himself, with an "out of the box" kit. These kits will go onsale starting June 1. Stay tuned for updates. Thanks. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

05-20-2011, 03:32 PM	#2
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,938	Re: 63-87 rack and pinion Awesome, I have also been waiting for some more info on your rear shock mounts and the long track bar you are showing on the JT project. I currently have adjustable shocks so I would be interested in a package deal without the shocks so I can use my QA1 shocks. Thanks David __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

05-20-2011, 05:38 PM	#3
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion on the way soon __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

05-21-2011, 03:20 AM	#4
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: 63-87 rack and pinion Sounds good Rob, I am to far along to use you kit but it is nice to see all the testing and R & D that is going into the new Rack & pinion kit before it is released. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

05-21-2011, 10:06 PM	#5
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: 63-87 rack and pinion Tempting....... __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-24-2011, 09:37 AM	#6
POPO1984 Registered User Join Date: Jul 2009 Location: Houston, Tx Posts: 1,133	Re: 63-87 rack and pinion Impatiently waiting __________________ 1972 SWB Medium Olive South Houston Instagram: Antbish84

05-24-2011, 10:55 AM	#7
inovermyhead Registered User Join Date: May 2010 Location: Shreveport, LA Posts: 115	Re: 63-87 rack and pinion someone had to do it. Can't wait to see the pics posted up. __________________ 81 GMC C15 RC SWB 5.3L 4L80E project

05-26-2011, 08:19 PM	#8
doubleRdazz Registered User Join Date: May 2011 Location: jersey Posts: 42	Re: 63-87 rack and pinion Looking forward to some pics Posted via Mobile Device

05-30-2011, 11:53 PM	#9
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 63-87 rack and pinion Did this happen? Or... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-31-2011, 07:38 PM	#10
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: 63-87 rack and pinion Rob, Will your rack & pinion setup work on a crossmember that has been section 1.5'' thanks __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840 Last edited by dnd1978; 05-31-2011 at 07:39 PM.

05-31-2011, 11:02 PM	#11
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion Sorry, sorry, sorry, But, we wil post uo wed. I tried today, but our internet was down at the shop. pump and pulleys are on. First step done. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

06-02-2011, 03:47 AM	#12
norwegianc10 Registered User Join Date: Jun 2008 Location: Norway Posts: 90	Re: 63-87 rack and pinion Subscribed __________________ 67 c10 Short Step 350/th400 daily driver 69 Camaro work in progress

06-02-2011, 07:38 PM	#13
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: 63-87 rack and pinion

06-06-2011, 12:57 PM	#14
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: 63-87 rack and pinion __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

06-06-2011, 01:48 PM	#15
doubleRdazz Registered User Join Date: May 2011 Location: jersey Posts: 42	Re: 63-87 rack and pinion Thought these were going to be ready for June 1st Posted via Mobile Device



Register or Log In To remove these advertisements.

06-06-2011, 02:20 PM	#16
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 63-87 rack and pinion where y'all at on this Rob? Do we have pricing and availability yet? __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

06-07-2011, 03:57 PM	#17
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion Jake (owner) installing the new p/s pump with a set of Bill's brackets. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

06-07-2011, 03:58 PM	#18
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion p/s pump and pulley Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

06-07-2011, 04:00 PM	#19
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion Removing the outer tierod ends Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

06-07-2011, 04:01 PM	#20
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion Removing the stock steering box Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

06-07-2011, 04:18 PM	#21
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion Pulling out all of the stock steering Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

06-07-2011, 04:20 PM	#22
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion The stock steering shaft goes too. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

06-07-2011, 04:21 PM	#23
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion Here is a shot of the main rack mounting brackets Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

06-07-2011, 04:23 PM	#24
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion The two lower 'fingers' set the height of the brackets. The first locating hole is dead center on the crossmember. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

06-07-2011, 04:25 PM	#25
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-87 rack and pinion The production rack mount. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

Register or Log In To remove these advertisements.