Project Zumo... Drag truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spray-Bomb · 02-08-2009, 10:02 PM

Hey guys, as some of yall prolly remember I bought a 67 project truck a while back & decided to make it my drag truck

Specs: 500 Caddi engine / TH-400, 12 bolt (for now), Z'd 4-1/2" front, shaved firewall, custom tube cross members & stiffeners, to be twin tubo'd

So here are some pics to start this thread out right (starting from when i got it)

Spray-Bomb · 02-08-2009, 10:02 PM

Spray-Bomb · 02-08-2009, 10:03 PM

Now, were are current

The other day I popped it off, so I know it will run
And today I swapped out the intake from FI, to carbed

Started with cleaning up the nasty old intake I got for free (sorry no before pics of when it was rusty)
And then I cleaned up the ports (forgot to get after pics lol)
Then I modded the carb area & smoothed the fire out of it

Spray-Bomb · 02-08-2009, 10:03 PM

Removing the intake & valve covers

NASTY !!!!

Clean

Got it trying to run, but I think the valves are sticking & Im trying to free them up

dieselarmy13 · 02-08-2009, 10:40 PM

Good to see ya finally working on it! Man that puppy was nasty inside. Looks like it never had an oil change.

Scott Webster · 02-09-2009, 10:33 AM

I was thinking the same thing on the oil change. Looks like someone only added oil. I had an S10 once that only had pensoil in it. 188k miles, but take the valve cover off and you had to dig to find rockers. Good luck getting that beast running. Subscribed

texanidiot25 · 02-09-2009, 09:04 PM

How random is this truck!

Twin Turbo, Cadillac powerd, Chevy, Pickup..

I'm in love.

*Dylan · 02-09-2009, 09:12 PM

I'm in love and subscribed. It's a 67 and we all know 67's are the sleekest meanest looking machines in the Chevy lineup.

**Palf70Step** · 02-09-2009, 09:52 PM

Gotta watch this one.

Spray-Bomb · 02-10-2009, 12:25 AM

Sorry for the lack of a update today, its been raining & my other bay is full of stuff so I can just pull it in yet

LuckyHenriksen · 02-10-2009, 12:37 AM

Badass man I can't wait to see a twin turbo caddy in an old chevy truck

Spray-Bomb · 02-10-2009, 12:39 AM

Well I was gonna keep this "hush hush" but Killer will be receiving the Caddi treatment as well

LuckyHenriksen · 02-10-2009, 12:50 AM

What are the plans for the motor? Just try to clean it out and then run it?

texanidiot25 · 02-10-2009, 12:52 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=328050 Could be a good idea

Spray-Bomb · 02-10-2009, 01:24 AM

Too bad that front isnt 67

Well I think we are gonna pull it down & do a freshen up on it, dont trust all the crap that could be in it

Gonna start it out with 2 GM-8 turbos off of 6.5TDs

6.5s turn roughly 4k max & the single stock turbo puts out about 20 to 22 psi max boost, so 2 of those on a 8.2 liter cad twisted to no more than 4k to begin with should build a max boost of possibly 12 to 15 psi
Stock 500 puts out about 300 hp / 400 tq, so with that boost it should be around 600 hp / 700 tq all done by 4k

Now thats all guesses, but it seems that isnt unreasonable

LuckyHenriksen · 02-10-2009, 01:25 AM

Cool I am interested in how the diesel turbos work on a gas motor.

Spray-Bomb · 02-10-2009, 01:51 AM

Turbo is a turbo, it just has to be for the right RMP range & cubic inches

Spray-Bomb · 02-10-2009, 06:46 PM

Well guys I think yall will be proud, I got a video of it running today

May not be the best cuz I forgot my video camera, & had to use my digital camera for the vids, but oh well

BTW, its loud as crap !!!!
Im not one to use ear protection for starting engines, but I did on the one

YouTube - Zumo running

YouTube - 500 Caddi end play & header...

Spray-Bomb · 02-10-2009, 06:52 PM

I dunno what the deal with the vids are, they play just fine on YouTube & when I open another tab & paste the URL in it they play too

Maybe its the board ???

Just click the title of them & it will take you to YouTube to watch them

texanidiot25 · 02-10-2009, 07:07 PM

Damn those cadi motors make some noise.. Lot rev happier sounding than I thought.

Spray-Bomb · 02-11-2009, 02:37 AM

Yeah it surprised us as to how loud it was only being like 8:1 compression & it revs as good as some of my SBCs !!!

I think that cleaning up & modding that intake did a lot to be honest

thirdstreettito · 02-11-2009, 10:08 AM

Drop Dead Sexy.

I want a Caddy 500 now!

Spray-Bomb · 02-11-2009, 12:17 PM

Well I have some bad news, after putting out a post on a caddi board dad found that propper end play when fresh on one of these should be from .002 to .0012

So we are hoping that the crank & or block isnt toast, more to come when we pull the engine (that will be when we get it in the shop)

67_C-30 · 02-11-2009, 06:30 PM

Very cool! I love out the box engine ideas! I have a GMC 401 Magnum V6 that I would love to turbocharge.

LuckyHenriksen · 02-11-2009, 09:59 PM

Quote:

Originally Posted by Spray-Bomb

Well I have some bad news, after putting out a post on a caddi board dad found that propper end play when fresh on one of these should be from .002 to .0012

So we are hoping that the crank & or block isnt toast, more to come when we pull the engine (that will be when we get it in the shop)

So your end play isn't in spec?

02-08-2009, 10:02 PM	#1
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Project Zumo... Drag truck Hey guys, as some of yall prolly remember I bought a 67 project truck a while back & decided to make it my drag truck Specs: 500 Caddi engine / TH-400, 12 bolt (for now), Z'd 4-1/2" front, shaved firewall, custom tube cross members & stiffeners, to be twin tubo'd So here are some pics to start this thread out right (starting from when i got it) __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 07-23-2009 at 07:52 PM.

02-08-2009, 10:02 PM	#2
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Zumo... Drag truck __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 02-08-2009 at 10:06 PM.

02-08-2009, 10:03 PM	#3
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Zumo... Drag truck Now, were are current The other day I popped it off, so I know it will run And today I swapped out the intake from FI, to carbed Started with cleaning up the nasty old intake I got for free (sorry no before pics of when it was rusty) And then I cleaned up the ports (forgot to get after pics lol) Then I modded the carb area & smoothed the fire out of it __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 07-23-2009 at 07:54 PM.

02-08-2009, 10:03 PM	#4
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Zumo... Drag truck Removing the intake & valve covers NASTY !!!! Clean Got it trying to run, but I think the valves are sticking & Im trying to free them up __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 02-08-2009 at 10:23 PM.

02-08-2009, 10:40 PM	#5
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: Project Zumo... Drag truck Good to see ya finally working on it! Man that puppy was nasty inside. Looks like it never had an oil change. __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL

02-09-2009, 10:33 AM	#6
Scott Webster Sheetmetal Psycho Join Date: May 2005 Location: athens PA Posts: 515	Re: Project Zumo... Drag truck I was thinking the same thing on the oil change. Looks like someone only added oil. I had an S10 once that only had pensoil in it. 188k miles, but take the valve cover off and you had to dig to find rockers. Good luck getting that beast running. Subscribed __________________ I didn't say you were stupid, but I was thinking it... I need a check up from the neck up! Project "Rigginstine's Monster" 1971 C-10 longbed 355/4spd Future mods: 67 front clip Webby's Rigginations - where everything has potential!

02-09-2009, 09:04 PM	#7
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Project Zumo... Drag truck How random is this truck! Twin Turbo, Cadillac powerd, Chevy, Pickup.. I'm in love.

02-09-2009, 09:12 PM	#8
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: Project Zumo... Drag truck I'm in love and subscribed. It's a 67 and we all know 67's are the sleekest meanest looking machines in the Chevy lineup. __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?

02-09-2009, 09:52 PM	#9
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,759	Re: Project Zumo... Drag truck Gotta watch this one. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-10-2009, 12:25 AM	#10
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Zumo... Drag truck Sorry for the lack of a update today, its been raining & my other bay is full of stuff so I can just pull it in yet __________________ Just not low enough... ----------------------------- Sinister Killer

02-10-2009, 12:37 AM	#11
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Project Zumo... Drag truck Badass man I can't wait to see a twin turbo caddy in an old chevy truck __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

02-10-2009, 12:39 AM	#12
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Zumo... Drag truck Well I was gonna keep this "hush hush" but Killer will be receiving the Caddi treatment as well __________________ Just not low enough... ----------------------------- Sinister Killer

02-10-2009, 12:50 AM	#13
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Project Zumo... Drag truck What are the plans for the motor? Just try to clean it out and then run it? __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

02-10-2009, 12:52 AM	#14
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Project Zumo... Drag truck http://67-72chevytrucks.com/vboard/s...d.php?t=328050 Could be a good idea

02-10-2009, 01:24 AM	#15
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Zumo... Drag truck Too bad that front isnt 67 Well I think we are gonna pull it down & do a freshen up on it, dont trust all the crap that could be in it Gonna start it out with 2 GM-8 turbos off of 6.5TDs 6.5s turn roughly 4k max & the single stock turbo puts out about 20 to 22 psi max boost, so 2 of those on a 8.2 liter cad twisted to no more than 4k to begin with should build a max boost of possibly 12 to 15 psi Stock 500 puts out about 300 hp / 400 tq, so with that boost it should be around 600 hp / 700 tq all done by 4k Now thats all guesses, but it seems that isnt unreasonable __________________ Just not low enough... ----------------------------- Sinister Killer



Register or Log In To remove these advertisements.

02-10-2009, 01:25 AM	#16
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Project Zumo... Drag truck Cool I am interested in how the diesel turbos work on a gas motor. __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

02-10-2009, 01:51 AM	#17
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Zumo... Drag truck Turbo is a turbo, it just has to be for the right RMP range & cubic inches __________________ Just not low enough... ----------------------------- Sinister Killer

02-10-2009, 06:52 PM	#19
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Zumo... Drag truck I dunno what the deal with the vids are, they play just fine on YouTube & when I open another tab & paste the URL in it they play too Maybe its the board ??? Just click the title of them & it will take you to YouTube to watch them __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 02-10-2009 at 06:53 PM.

02-10-2009, 07:07 PM	#20
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Project Zumo... Drag truck Damn those cadi motors make some noise.. Lot rev happier sounding than I thought.

02-11-2009, 02:37 AM	#21
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Zumo... Drag truck Yeah it surprised us as to how loud it was only being like 8:1 compression & it revs as good as some of my SBCs !!! I think that cleaning up & modding that intake did a lot to be honest __________________ Just not low enough... ----------------------------- Sinister Killer

02-11-2009, 10:08 AM	#22
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Project Zumo... Drag truck Drop Dead Sexy. I want a Caddy 500 now! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

02-11-2009, 12:17 PM	#23
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Zumo... Drag truck Well I have some bad news, after putting out a post on a caddi board dad found that propper end play when fresh on one of these should be from .002 to .0012 So we are hoping that the crank & or block isnt toast, more to come when we pull the engine (that will be when we get it in the shop) __________________ Just not low enough... ----------------------------- Sinister Killer

02-11-2009, 06:30 PM	#24
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Project Zumo... Drag truck Very cool! I love out the box engine ideas! I have a GMC 401 Magnum V6 that I would love to turbocharge. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

Register or Log In To remove these advertisements.