Scratches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nichboy · 03-27-2002, 08:42 AM

Original glass in truck, lot of fine scratches all over. Is there anything i can use to buff some of these out. Thanks guys

johnnyp · 03-27-2002, 08:47 AM

Good info and supplies here:
http://www.eastwoodco.com/cgi-bin/sg..._glass_new.htm

------------------
72 Sierra Grande - "Maych"
sierraG on some boards

If a man speaks in the middle of a forest and there is no woman around to hear him, is he still wrong?

Forget about "do it right the first time". Do it wrong the first time to learn how, then do it right the second time.

Maych Home Page

Nichboy · 03-27-2002, 10:11 AM

Is there anything i can get at a local parts store.

**DANTIP** · 03-27-2002, 10:15 AM

I once helped a friend move and her bicycle handle bar scratched my rear glass.

A glass shop told me tooth paste would help the scratch. I polished the glass with the tooth paste and the scratch was able to be removed.

cali_surfer · 03-27-2002, 10:35 AM

I had looked into this a while back. I heard that the scratch(es) can only be removed if you run your finger nail over it and can't feel a depression. The compound you need to buff them out, or I should say the stuff thats in the eastwood kit, is cerium oxide. There's a 50/50 chance that a local automotive glass shop will have some. Might want to get out your phone book and make some calls. Good luck.

bouncytruck · 03-27-2002, 12:56 PM

I saw some glass polish (don't know if it is the same thing) at the local Novus glass repair shop. It was a complete kit for about $10

------------------
'69 K-5 Blazer - 350/TH350, 6" lift, 35" tires
Bothell, WA

1-PU70 · 03-27-2002, 01:10 PM

IV used tooth past before works very good on fine ones.

67chevelle · 03-27-2002, 01:38 PM

Cerium Oxide. You can get some of it at a gem / rock shop.. It's used for one of the last step in polishing rocks. sprinkle some on a damp cloth rub the glass..
67chevelle

------------------
Current rides:
01 GMC 2500 SB HD CC 4x4 8.1 allison
67 Chevelle drag car
509 CI BBC,TH400
9.850 @ 134.55 mph
1970 C10 2WD PU being rebuilt
1967 El Camino 396, TH400 ( wife's drag car)
Jr. Dragster 5 hp B&S for the kids

http://community.webshots.com/user/mark67chevelle

03-27-2002, 08:42 AM	#1
Nichboy Registered User Join Date: Jun 2001 Location: Oklahoma City Oklahoma Posts: 173	Scratches Original glass in truck, lot of fine scratches all over. Is there anything i can use to buff some of these out. Thanks guys __________________ 1971 Chevy SWB Oklahoma City, Oklahoma

03-27-2002, 08:47 AM	#2
johnnyp Keepin' It Stock Join Date: Aug 2001 Location: Grand Island, Nebraska, USA Posts: 554	Good info and supplies here: http://www.eastwoodco.com/cgi-bin/sg..._glass_new.htm ------------------ 72 Sierra Grande - "Maych" sierraG on some boards If a man speaks in the middle of a forest and there is no woman around to hear him, is he still wrong? Forget about "do it right the first time". Do it wrong the first time to learn how, then do it right the second time. Maych Home Page __________________ 72 Sierra Grande - Maych Forget about "do it right the first time". Do it wrong the first time to learn how, then do it right the second time.

03-27-2002, 10:11 AM	#3
Nichboy Registered User Join Date: Jun 2001 Location: Oklahoma City Oklahoma Posts: 173	Is there anything i can get at a local parts store. __________________ 1971 Chevy SWB Oklahoma City, Oklahoma

03-27-2002, 10:35 AM	#5
cali_surfer Registered User Join Date: Jun 2000 Location: Chico, CA Posts: 1,136	I had looked into this a while back. I heard that the scratch(es) can only be removed if you run your finger nail over it and can't feel a depression. The compound you need to buff them out, or I should say the stuff thats in the eastwood kit, is cerium oxide. There's a 50/50 chance that a local automotive glass shop will have some. Might want to get out your phone book and make some calls. Good luck. __________________ My engine is stock... trust me ;o)

03-27-2002, 12:56 PM	#6
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	I saw some glass polish (don't know if it is the same thing) at the local Novus glass repair shop. It was a complete kit for about $10 ------------------ '69 K-5 Blazer - 350/TH350, 6" lift, 35" tires Bothell, WA __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-27-2002, 10:15 AM	#4
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,888	I once helped a friend move and her bicycle handle bar scratched my rear glass. A glass shop told me tooth paste would help the scratch. I polished the glass with the tooth paste and the scratch was able to be removed.

03-27-2002, 01:10 PM	#7
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	IV used tooth past before works very good on fine ones. __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

03-27-2002, 01:38 PM	#8
67chevelle drag racer Join Date: Nov 2001 Location: Meridian Idaho Posts: 127	Cerium Oxide. You can get some of it at a gem / rock shop.. It's used for one of the last step in polishing rocks. sprinkle some on a damp cloth rub the glass.. 67chevelle ------------------ Current rides: 01 GMC 2500 SB HD CC 4x4 8.1 allison 67 Chevelle drag car 509 CI BBC,TH400 9.850 @ 134.55 mph 1970 C10 2WD PU being rebuilt 1967 El Camino 396, TH400 ( wife's drag car) Jr. Dragster 5 hp B&S for the kids http://community.webshots.com/user/mark67chevelle __________________ Current rides: 01 GMC 2500 SB HD CC 4x4 8.1 allison 67 Chevelle drag car 516 CI BBC,TH400 9.777 @ 138.4 mph 1970 C10 2WD PU being rebuilt 1967 El Camino 502, TH400 ( wife's drag car) Jr. Dragster 5 hp B&S for the kids



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.