01-12-2016, 08:52 AM | #11 | |
Registered User
Join Date: Nov 2007
Location: baltimore, maryland
Posts: 617
|
Re: 1970 K20 Restoration
Quote:
strong as all get out. Any of these axles can be converted to disc brakes using kits made by various manufacturers that provide a bracket that mounts to the axle (no welding) new rotors and either truck or cadillac calipers. If ground clearance is an issue for you the Dana 60 has a smaller case than the corporate 14 bolt so that is an advantage as well. So, without a welder (dana60) with a welder (corporate 14 bolt.) BTW, drum brakes work great and no need to change to disc unless you want to. Be aware that the drum brakes since stock will allow you to maintain the stock e-brake. If you switch to disc you will need to make a provision for the emergency brake or go without one. First, You have to order calipers that have e-brake capabilities. You may need to order custom e-brake cables and have brackets made to secure them to the caliper. I have also read about people using driveline brakes or line-locks. If you read through my build you will see my solution. Cheap, but did require welding. Works great! So that's my 2 cents. Good luck making a decision and have fun with it. Before I got a welder I was in your shoes. I wanted to change the rear without needing to weld anything. The dana 60 was my choice because it dropped right in and allowed me to change my gear ratio from 4:10 to 3:73, i was able to convert to disc and had a lit of ground clearance. I also knew I wasn't going to be wheeling so didn't need the strength of the 14 bolt. Cheers Chris
__________________
Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission! |
|
Bookmarks |
|
|