floor pans??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66olblue · 09-15-2009, 09:11 PM

Hey all,

First time posting and first time using!

Does anyone have any experience buying floor pans for 66 chevy c10?
I have looked around the web and have found a few different styles:
classic industries
summits
LMCtruck

The LMC truck ones say "oe" but are twice as much, are the ones from classic industries any different?

Anyone with experience much appreciated!

ruffrida2005 · 09-15-2009, 09:19 PM

Your always going to pay more from LMC on pretty much everything. Mostly everyone here buys from classic industries. They are vendors here so check them out. Also there is GMCPaul, Mar-K, Brothers Truck, Several diffrent places on here and they give forum discounts. just look them up.

66olblue · 09-15-2009, 09:49 PM

Oh ok awesome! Thanks for the info!

I am mostly wondering about the "originality" of the floor pans! The pictures don't seem to match up to my exact floor?

ruffrida2005 · 09-15-2009, 10:14 PM

A lot of vendors dont have the right pics, but they fit well on the trucks. best bet is to go with Classic industries.

66olblue · 09-15-2009, 10:24 PM

Awesome! Thanks "rida" for all the help!

What would you suggest for headlamps? I can't decide what to go with, brothers euros the best bet?

Alan's Classic · 09-15-2009, 10:50 PM

and welcome aboard!!

I got my pans from Goodmark. I can't remember who their supplier is, but they were a pain.

Post up some pics of your truck and your progress.

ruffrida2005 · 09-15-2009, 11:14 PM

Brothers is a real good company and good customer service, I've bought several stuff from them and will continue too.

**Captainfab** · 09-15-2009, 11:49 PM

When it comes to replacement and patch panels, just keep in mind where they are made and that most likely they will need a certain amount of re-work to make them fit correctly. Sometimes the parts will fit well and other times they will not. That's been my experience with the parts I've purchased from Classic parts. The parts they carry are made by Key Parts and imported by Tri-Plus ( I think I got that part right).

A little tip on patch panels. You don't necessarily have to use the whole patch panel. I only cut out as much as I need to to get to good solid metal, and cut the patch panel to fit. And concerning the floor patch panels, depending on the extent of the rust in your cab, there is a panel available that runs from the back wall of the cab all the way to the firewall, and inward from the rocker panel a few inches......and includes the inner rocker panel. This can be easier than welding in two pieces, if it will work for your situation.

63 & 64 Bowties · 09-16-2009, 07:11 AM

Welcome to the board. Here's a link to site vendors:
http://67-72chevytrucks.com/vboard/showgroups.php
Scroll down to the middle of the page and you'll find the list.

joe231 · 09-16-2009, 08:45 AM

Classic parts has some nice ones

http://www.classicparts.com/1963-66-...tinfo/45-931B/

http://www.classicparts.com/1963-66-...tinfo/45-932B/

they don't have pictures but these have the hole punched out for the body mount and even have the nuts welded on for the trans tunnel cover

I got a pair from Tx Firefighter but haven't installed them yet

66olblue · 09-16-2009, 09:56 AM

Quote:

Originally Posted by 63 & 64 Bowties

Welcome to the board. Here's a link to site vendors:
http://67-72chevytrucks.com/vboard/showgroups.php
Scroll down to the middle of the page and you'll find the list.

Ok well sorry if this sounds stupid..

How does this work or how do I use it?

66olblue · 09-16-2009, 09:57 AM

Thanks everyone for your help! I will post some pics of Ol Blue and the story this evening.

**Captainfab** · 09-16-2009, 11:31 PM

Just left click on the link (blue text) and that will take you to another page. Then scroll down to the list of site vendors.

Quote:

Originally Posted by 66olblue

Ok well sorry if this sounds stupid..

How does this work or how do I use it?

66olblue · 09-17-2009, 09:21 PM

Name: IMG_0780.jpg
Views: 656
Size: 32.0 KB

Name: IMG_0866.jpg
Views: 651
Size: 46.6 KB

Name: IMG_0864.jpg
Views: 576
Size: 39.2 KB

Here it is on my dads ranch in Colorado when I went to pick her up!

More current pictures to come of it in CA!

**ChiefRocka** · 09-18-2009, 12:48 AM

Nice truck man...welcome from San Jose

09-15-2009, 09:11 PM	#1
66olblue Registered User Join Date: Sep 2009 Location: Turlock, CA Posts: 7	floor pans??? Hey all, First time posting and first time using! Does anyone have any experience buying floor pans for 66 chevy c10? I have looked around the web and have found a few different styles: classic industries summits LMCtruck The LMC truck ones say "oe" but are twice as much, are the ones from classic industries any different? Anyone with experience much appreciated!

09-15-2009, 09:19 PM	#2
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: floor pans??? Your always going to pay more from LMC on pretty much everything. Mostly everyone here buys from classic industries. They are vendors here so check them out. Also there is GMCPaul, Mar-K, Brothers Truck, Several diffrent places on here and they give forum discounts. just look them up. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

09-15-2009, 09:49 PM	#3
66olblue Registered User Join Date: Sep 2009 Location: Turlock, CA Posts: 7	Re: floor pans??? Oh ok awesome! Thanks for the info! I am mostly wondering about the "originality" of the floor pans! The pictures don't seem to match up to my exact floor?

09-15-2009, 10:14 PM	#4
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: floor pans??? A lot of vendors dont have the right pics, but they fit well on the trucks. best bet is to go with Classic industries. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

09-15-2009, 10:24 PM	#5
66olblue Registered User Join Date: Sep 2009 Location: Turlock, CA Posts: 7	Re: floor pans??? Awesome! Thanks "rida" for all the help! What would you suggest for headlamps? I can't decide what to go with, brothers euros the best bet?

09-15-2009, 10:50 PM	#6
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: floor pans??? and welcome aboard!! I got my pans from Goodmark. I can't remember who their supplier is, but they were a pain. Post up some pics of your truck and your progress. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

09-15-2009, 11:14 PM	#7
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: floor pans??? Brothers is a real good company and good customer service, I've bought several stuff from them and will continue too. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

09-15-2009, 11:49 PM	#8
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: floor pans??? When it comes to replacement and patch panels, just keep in mind where they are made and that most likely they will need a certain amount of re-work to make them fit correctly. Sometimes the parts will fit well and other times they will not. That's been my experience with the parts I've purchased from Classic parts. The parts they carry are made by Key Parts and imported by Tri-Plus ( I think I got that part right). A little tip on patch panels. You don't necessarily have to use the whole patch panel. I only cut out as much as I need to to get to good solid metal, and cut the patch panel to fit. And concerning the floor patch panels, depending on the extent of the rust in your cab, there is a panel available that runs from the back wall of the cab all the way to the firewall, and inward from the rocker panel a few inches......and includes the inner rocker panel. This can be easier than welding in two pieces, if it will work for your situation. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-16-2009, 07:11 AM	#9
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: floor pans??? Welcome to the board. Here's a link to site vendors: http://67-72chevytrucks.com/vboard/showgroups.php Scroll down to the middle of the page and you'll find the list. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

09-16-2009, 08:45 AM	#10
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: floor pans??? Classic parts has some nice ones http://www.classicparts.com/1963-66-...tinfo/45-931B/ http://www.classicparts.com/1963-66-...tinfo/45-932B/ they don't have pictures but these have the hole punched out for the body mount and even have the nuts welded on for the trans tunnel cover I got a pair from Tx Firefighter but haven't installed them yet __________________ *CHEVY ONLY* Last edited by joe231; 09-16-2009 at 08:45 AM.

09-16-2009, 09:57 AM	#12
66olblue Registered User Join Date: Sep 2009 Location: Turlock, CA Posts: 7	Re: floor pans??? Thanks everyone for your help! I will post some pics of Ol Blue and the story this evening.

09-17-2009, 09:21 PM	#14
66olblue Registered User Join Date: Sep 2009 Location: Turlock, CA Posts: 7	Re: floor pans??? Here it is on my dads ranch in Colorado when I went to pick her up! More current pictures to come of it in CA!

09-18-2009, 12:48 AM	#15
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: floor pans??? Nice truck man...welcome from San Jose __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.